What happens when the windows are not closed on a rainy day, and the floor is soaked in rainwater?

Laminate flooring will not have a great impact after being soaked in water, but the consequences of wood flooring after being soaked in water are more serious, and the floor will crack and bulge large bales.

Poor quality wood floors will be blistered after being blistered, and when the water dries, it will shrink, and the gaps will become larger.

If the floor is blistered, it will float up, and then it will rot, and you will have to replace the floor.

It will soak the floor softly, and there will be bulges, which will cause cracking and deformation, and if you don't treat it, it will start to mold from the inside.

If the water is small and the amount of water is not large, treat the dry surface water as soon as possible and use a vacuum cleaner or hair dryer to cool the air to absorb the water immersed in the gaps between the floors. If the area is flooded, the baseboard should be removed as soon as possible, and the waterlogged floor should be pried up, and the floor should be raised with bricks or other things, and the floor should be stacked in a "well" shape to dry. At the same time, open floors and floors that are only superficially waterlogged can be dried with the help of a fan.

Generally speaking, a good quality laminate flooring that has been soaked in water for no more than 12 hours and first aid measures can be paved again after drying.

If you forget to close the windows at home but encounter rainy weather, it is very likely to cause the wooden floor in your home to be soaked in water, so what if the wooden floor in your home is blistered in an unexpected situation?

Pry open the floor

Blistered floors, especially solid wood floors, should try to ensure that they do not deform, and it is important to dry in the shade at this time. After wiping the water inside and outside of the removed floor, stack them in the shape of a "well", and use the pressure weight generated by the superposition to prevent the floor from deforming. Place the floor with the reverse side facing up to prevent cracking of the surface due to rapid drying.

In particular, it is important to note that it should not be exposed to the sun, but should be placed in a cool and ventilated place to dry.

Remove the baseboard

This method is used for laminate flooring. When the floor at home is blistered, it is not recommended to remove it to dry, which is easy to cause laminate flooring.

is likely to not be able to be used again. Quickly wipe off the stagnant water on the surface, and then remove the skirting boards around the perimeter to expose the gap between the floor and the wall, so that the moisture in the floor can be easily removed. If necessary, you can use a household hair dryer to assist, but do not blow directly on the floor, but blow on the ground.

This method generally lasts longer, at least a week, and at most it may take half a month.

Pry up ventilation on both sides

If the water ingress into the floor of the home is too large, it is no longer possible to press it closely, and it is also necessary to pry up the opposite board along the direction of the keel arrangement, so that the internal air circulation can take away the moisture. If you are not at ease, you can also sprinkle some desiccant.

Speed up the drying of the inside of the keel.

High power vacuum cleaner assisted

If you find that there is water entering the floor, you can use a vacuum cleaner to suck the water vapor out at the first time. This applies to hardwood floors that are small in size and do not have a keel. If that's not the case, you'll have to choose something else.

For the floor to be soaked, if it is a solid wood floor or composite solid wood floor, the impact is not too big under the soaking of a small amount of water, the water is dried and the deformed floor will automatically return to its original shape, if it is a large amount of water soaked in this case, no matter what the floor, there is no good way to replace the new floor, I hope this article is useful to everyone, if you think this article is good, you may wish to share this article with your friends,

If the wooden floor is soaked in water, the water on the surface of the wooden floor should be sucked dry in a short time, and then the water vapor should be sucked away with a vacuum cleaner in the splicing gap of the soaked wooden floor, or dried with a hair dryer and cold air. However, it should not be blown by hot air to avoid dry cracking and deformation caused by heating and drying. For small areas of soaked water, do not lift the laminate floor to dry, which can easily cause hard damage and cause serious consequences that cannot be restored.

It is best to quickly remove the floor to expose the expansion joints, which allow the moisture to be dissipated. For large areas of soaking water, it is necessary to deal with it in time, try to keep the floor not deformed, lift the floor, use the weight generated by its stacking to prevent deformation, and pay attention not to expose it to the sun.

Remove the baseboards on all four sides as soon as possible, and then preferably remove a corner (about three or four rows of floors) from the side of the floor that is a male groove to drain the water manually. Depending on the season, if you open the front and back doors and windows in summer, the floor will dry out naturally after a while, and if it is spring or winter, you can only turn on the air conditioner to get the humidity out.

Hardwood floors are inherently waterproof and can be wiped dry with a dry rag so that there are no problems.

If there is a lot of water, you should immediately use a cloth with good water absorption, suck the water clean, and then wipe it dry, or use a vacuum cleaner to suck the water out, and then use a hair dryer to dry it, be sure to deal with it as soon as possible, otherwise the floor is easy to deform.

Summary. Dear, hello, I have inquired for you that because the window is not closed, the rain dripped to the floor because the waterproof layer is not done, it is recommended to find the developer to ask it to bear the corresponding responsibility. A small amount of water will float on the surface, and it is okay to mop it off.

When it rains, leaving the windows unclosed leads to a lot of rainwater intrusion, and the wooden floor is not enough to hold water. Water invades the floor, which means that the structure of the floor itself is soaked in water, and then there is water on the floor. Wooden flooring, which is all wooden, is not resistant to water, and hydrophilic will expand.

It is composite and not resistant to water, so it will be corroded and softened, discolored, and deteriorated.

Because the windows are not closed, the rain is dripping onto the floor, why what? Why?

Hello, I am a designer who has been engaged in the furniture industry for 10 years, and I have paid for craftsmen all my life Familiar areas include chain limb search public decoration, residential, curtain wall three major sub-industries, and I am proficient in hunger. Design, construction, maintenance and maintenance of interior and exterior decoration works. We'll be happy to answer for you.

Hope it helps you <>

Dear, hello, I have inquired for you that because the window is not registered, so the rain dripped to the floor because the waterproof layer is not done, it is recommended to find the developer to ask it to bear the corresponding responsibility. A small amount of water will float on the surface, and it is okay to mop it off. When it rains, leaving the windows unclosed leads to a lot of rainwater intrusion, and the wooden floor is not enough to hold water.

The water invades the underneath the floor, which means that the structure of the floor itself is soaked in water, and then there is stagnant water on the floor. Wooden flooring, which is all wooden, is not resistant to water, and hydrophilic will expand. It is not resistant to water, and will be corroded and softened, discolored, and deteriorated.

Answer: If water seeps into the floor, you should notify the floor installer as soon as possible, and do not remove it yourself. One key home decoration automatically** tells you the following ways to reduce losses:

1. Regardless of the size of the soaked area, it is not recommended to pry it up to dry, so that the floor will not be able to be used again. The correct way to do this is to quickly drain the surface water of the floor, remove the baseboard, expose the expansion joints, and rely on the expansion joints to dissipate the moisture.

2. If the solid wood floor enters the water in a small area, the water vapor can be sucked out with a high-power vacuum cleaner, but the floor needs to be pried up and dried in the shade for a large area of water.

3. After the soaking floor is pried up, the surface water of the floor should be wiped dry, and the reverse side should be placed upwards according to the "well" shape to prevent the surface from drying out and cracking due to rapid drying.

Sports wood flooring is soaked and swollen by water: sports wood flooring is water-abore, and the sports wood floor after being soaked in water is easy to swell and deform, which directly affects the use of sports wood flooring. Generally, when encountering this kind of problem, do not remove the wooden floor without permission, and contact a professional wooden floor installer to repair and deal with it according to the soaking situation.

Find a floorer to pay to repair it, and if it is serious, it can be partially replaced.

The floor just can't be blistered, and the good way should be to say nothing, but if you wax, it shouldn't be a big deal if you don't get into the water, don't use the dryer.

Quickly dry the water with a dry towel and open the door to allow air to circulate or use an electric fan to dry. Even if you have a bad account, you can use it. After drying and shrinking naturally, the seam falls. It's just that it's not as smooth as it was original, and there's still a little color difference. But it's okay to use it for a few years.

The average wooden floor must be soaked and useless. After drying, it will be deformed, squeezed and detached.

Open doors and windows to ventilate and let in light, and use an electric fan if necessary. If possible, turn on the air conditioner to dehumidify first, and then ventilate the effect is better.

After installation and acceptance, soak in water during use, which is a problem of use! In principle, the manufacturer will not be responsible, you need to bear it yourself!

What type of flooring: laminate, multi-layered, solid wood or laminated?

Customer complaints can be carried out according to the above parameters!

The national standards for the three categories of products are as follows!

Laminate flooring: GB T 18102-2007 Solid wood multi-layer: GB T 18103-2013 Ly T 1859-2009

Single solid wood: GB T 15036-2009 replace, the soaking area should be about 3 square meters! Try to communicate with the manufacturer, but can you avoid labor costs?

Ask specific questions or send me a private message!