What should I do if the floor has been flooded? What to do if the floor is flooded

1. Ventilation and drying.

If there is a large area of water soaking, the wooden floor should be carefully pried up and pressed"wells"The font is stacked in a ventilated place to dry, and the weight generated by its stacking is used to prevent deformation, and in general, the better quality wooden flooring can be used again.

2. Blow drying. What should I do if water gets into the wooden floor? Dry the water, wipe the surface moisture with a dry cloth, and then use a vacuum cleaner to absorb the moisture in the splicing gaps of the soaked wooden floor or use the cold air setting of the hair dryer to dry it; Next, you can use some heavy objects to press on the small warped area, and after a while, the wooden floor will return to normal on its own.

3. Partial replacement.

If, after a period of time, the bulge at the seams goes down, but the color is too far from the original wooden floor, you can try to wax the wooden floor, and the soaked wooden floor after waxing will basically be the same as the original. What should I do if water gets into the wooden floor? If the color and shape of the wooden floor are still very different from the original state after waxing, then the only way to replace the partial wooden floor is to replace it.

Fourth, remove the baseboard.

Whether it is a large area of water or a small area of water, it is not recommended to pry up the wooden floor to dry, which is easy to cause damage to the wooden floor, and is likely to cause serious consequences that cannot be used again. What should I do if the wooden floor gets into the water? Quickly drain the surface water of the wooden floor, and then temporarily remove the baseboard of the wooden floor, expose the expansion joint, rely on the expansion joint to dissipate the water vapor, according to the different water intake, it usually takes about seven to fifteen days to dry, the wooden floor with good quality or not long soaking time can be restored by itself, if it cannot be restored after fifteen days, it has to be considered to be replaced.

5. Pry up the wooden floor.

What should I do if water gets into the wooden floor? If you find a small area of water ingress in time, you can pry up the board after the ground is cleaned, and the damp wooden floor can be dried and reinstalled; If the water inflow is slightly large, not only should the board at the leakage be pried up, but also the opposite board should be pried up along the direction of the keel arrangement, so that the internal air circulation can take away the moisture. If you can't determine the size of the inlet water, pry up the board in turn according to the flow direction of the inlet water to check the humidity and make sure that nothing goes wrong.

You can take it apart and take a look, or the renovation team will check it.

<> "When the house is renovated, the floor is to be laid, and what should we do if the floor is flooded?".

What to do if the floor is flooded

1. For the water ingress of a small area of the floor, the moisture on the surface of the floor should be wiped clean with a dry cloth before treatment, and then ventilated and dried, and then some heavy objects can be pressed on the small area of the warped part. Pry up the boards one by one according to the flow direction of the incoming water, check the humidity, and let the internal circulation air take away the moisture.

2. If the floor is seriously soaked in water, the floor should be carefully pried up, stacked and dried according to the tic-tac-toe to prevent deformation, and then reinstalled and used after drying.

3. Quickly drain the surface water, remove the baseboard, expose the expansion joint, rely on the expansion joint to dissipate moisture, wait for about seven to fifteen days to dry, and replace the floor if it cannot be recovered after fifteen.

Cleaning of the floor

1. Wipe the floor with a wet rag, the rag is in a semi-dry wet state, so that the floor will not attract dust, wipe it with a wet rag first, and clean it with a dry rag to remove the residual water stains.

2. Mix the laundry detergent with warm water, soak it in the laundry detergent water with a mop, then wring it out to mop the floor, after mopping it again, mop it again with water, and finally wipe it dry with a dry rag.

3. Slippery detergent, rice water and expired milk have a good cleaning effect on the floor, pour it on the floor, wipe it repeatedly with a rag or mop, wipe it with water, and finally dry the floor.

choice of flooring

1. The choice of material, in the process of using solid wood flooring, there will be wet expansion and dry contraction, etc., and it is necessary to try to choose wood with stable material.

2. The choice of the floor should be short and not long, narrow and not wide, pay attention to the size of the selection, and the stability of the small size of the floor is relatively good.

Solid wood flooring is a kind of high-grade flooring, which has won wide popularity because of its fidelity, naturalness, purity and changeable shape. However, if water enters accidentally, it may damage the floor, affecting the aesthetics and longevity of the floor. Here's how to deal with solid wood floors after they get into the water.

1.The first step is to clean up the water immediately. If the water is overflowing from the pipe, the valve of the pipe inlet should be closed first to avoid increasing the amount of water entering the pipe.

Then immediately use a water absorber, rag and other items to clean up the water soaked in the water as much as possible, so that some of the water can be sucked away to achieve the purpose of slowing down the damage.

2.The second step is to speed up drying. Use an electric fan or dehumidifier to dry out the environment around the water-damaged floor.

Or take the removed floor plate to dry in the sun or a well-ventilated place, so that the surface and the bottom can be dried to avoid moisture from penetrating into the floor, resulting in deformation and other problems.

3.The third step is to repair the floor. If the solid wood floor is deeply damp, the surface of the burning ants has obvious discoloration and deformation, and the damaged floor needs to be replaced and reinstalled.

This is a time-consuming and laborious job that requires professional work. However, if it is only a shallow area with moisture, you can wipe the floor clean before carrying out anti-mildew treatment, such as air-drying and burying, wiping with formaldehyde solution, etc.

4.The fourth step is moisture-proof treatment. If the solid wood floor is accidentally damaged due to the long-term construction of the furniture, you can consider opening a new small door in the corner of the ground wall - "small room door", and install a large bay window in your room to keep it ventilated and increase the air flow in the room.

In short, the solid wood floor should be cleaned immediately after water ingress, and then dried and moisture-proof to ensure that the floor will not be seriously damaged. If there is significant damage, the floor slabs will need to be reinstalled. Therefore, it is recommended to carry out tailor-made services when installing solid wood flooring to avoid the risk of damage caused by unsuitable quality selection or poor construction.