The bamboo steamer has become moldy, what should we do with it?

Bamboo steamer mold is generally caused by dirt and moisture, and food residues left inside may also become moldy, so please wash it carefully. Improper use or improper cleaning can easily cause mold in the bamboo steamer, and the solution to the mold of the bamboo steamer is 1: soak it in rice washing water for a day and a night, and then brush it clean with a broom.

Precautions for use: Avoid placing in a damp place. Do not soak in water for a long time and avoid direct sunlight.

Bamboo steamer mold solution 2: soak it in concentrated salt water for one hour to prevent mold. Find a large basin and add water after putting salt, then put the steamer in it and soak it for an hour, and then take it out to dry brightly.

Bamboo steamer mold solution three: use alkaline water.

Wipe (the disinfectant doesn't do much, and the disinfectant is bamboo.)

Absorption, there will be a smell of disinfectant when used in the future, which is difficult to remove), put it in a cool and ventilated place to air dry naturally, or you can dry it in a place where the sun is not very sufficient.

Bamboo steamer moldy solution four: first soak in water and brush with a brush; If it can't be removed, add detergent and brush with a brush; If you still can't get rid of it, use soapy water or laundry detergent again; If you still can't get rid of it, you can buy a mold remover to clean it; If it can't be removed, it means that the mold spots have penetrated deep into the bamboo, and you can only use a knife to scrape it!

The bamboo steamer has become moldy, I think at this time you can use some vinegar, add soda, soak the bamboo Zhenrong, and then brush it with a brush, and then use boiling water to scald him again, and finally take it to the sun to dry it to kill and kill the virus.

If the bamboo steamer is moldy, scrub them clean, then put them in the sun to dry, and later store them in a ventilated and dry place.

Be sure to take it under the sun in time to dry it, and it must be placed in hot water to completely sanitize the poison, put it in the sun and expose it, I believe that such rough words are good.

Since it is bamboo, it is a material that is easy to rot and deteriorate, and if it has become moldy, it means that the material has been corroded, and it is not strong even if it is cleaned, so you can buy stainless steel to use it in the future.

Boil tap water, put white vinegar, aged vinegar, edible alkali.

Stir well and put the moldy steamer inside. Piping edges. After scalding all sides, boil the steamer basket in water.

When cooking, pay attention to the water surface should not pass the partition of the steamer surface, cover the lid, and remove the lid after half an hour.

After half an hour, take out the boiled steamer, cool it for a while, and brush the mold and its surroundings while it is hot. Rinse with cold water after brushing.

Add white vinegar and black vinegar edible alkali to boil and cook the steamer for half an hour, and after half an hour, put the steamer in a pot that is not used and soak it for a day, one day later.

Brush the steamer again, clean the water, and at this time, the mold spot will be cleaned.

Wait for the steamer to air dry and take the cooking oil.

Brush the inside and outside of the steamer with oil and air dry it in the shade so that there will be no mold spots in the future. Keep in mind that the steamer should not be exposed to the sun, as it will crack and is not easy to maintain for a long time.

The bamboo steamer has been moldy, if the mold is relatively light, put it in the warm who, soak it in dish soap for two hours, brush it with a brush, dry it can continue to use, if the mold is more serious, and even some rot, just choose to throw it away, don't use it again.

1. Clean the rice washing water.

Rice washing water has a good cleaning effect, if the bamboo cage drawer is moldy, it can be soaked in rice washing water for half a day, and then scalded with hot water, washed and exposed to the sun.

2. Scrub the bamboo cage drawer with ginger.

First add salt to the hot water, stir the water evenly, then put the moldy bamboo cage drawer in it and soak it for a few minutes, then take the bamboo cage drawer out of the water, cut some ginger slices, wipe the moldy place repeatedly with ginger slices, scrub for a few minutes to remove mildew, rinse it with hot water, and put it in the sun for a few minutes.

The bamboo steamer is moldy, you go to the place that sells dry condiments to buy some edible alkali, come back and find a larger basin to boil the water, soak the bamboo steamer in it and brush it with a brush, and then put it in the sun to dry, you can use it again.

Generally speaking, this situation depends on the corrosion of the steamer, it is recommended to throw it away if it is serious, it should still be used after strict disinfection, and if the frequency of home use is not high, try not to choose the bamboo steamer.

Scrubbing and drying with edible alkali can effectively remove mold, and high-temperature cooking can also be used, and cleaning and drying after each use to reduce mold pollution. Replace the steamer with a new one regularly.

White vinegar and salt are boiled and then soaked, and cleaning can remove mold and sterilize.

It is recommended to discard. The mold has penetrated deep into the bamboo, making it extremely difficult to remove.

After cleaning, it is subjected to several high-temperature treatments.

If such a phenomenon occurs, I think that you can directly put the bamboo steamer in boiling water and steam and boil it, so that the musty smell can be completely removed. Therefore, such a treatment method can make the steamer use normally.

Bamboo steamer moldy solution 1: soak in rice washing water for a day and a night, and then brush it clean with a broom. Precautions for use:

Avoid putting in a damp place. Do not soak in water for a long time and avoid direct sunlight. Bamboo steamer moldy solution two:

Soak in concentrated salt water for one hour to prevent mold. Find a large basin and add water after putting in the salt, and put the steamer in it after the salt is boiled, soak it in and soak it for a small while, and then take it out to dry it. Bamboo steamer moldy solution three:

Rub with alkaline water.

Soak in rice washing water and brush clean with a broom.

If the bamboo needs to be treated with pressure anti-corrosion and anti-mildew, you can add 1% Cannice antifungal agent AEM5700-F2 to it, and if there is a soaking process, you can add 2% antifungal agent AEM5700-F2 to the soaking liquid, which has a good anti-mildew effect after soaking. If water-based paint is used on the surface, 1% AEM5700-L can be added to the water-based paint for anti-mildew treatment.

Put the washed products in the sun for drying, be sure to dry the products, can not leave water, otherwise it will be moldy, and at the same time can not be overexposed, too much, if the water loss is too large, the bamboo products will crack, deformed.

The bamboo steamer was moldy and soaked for a day, but it was not washed off.

You can brush it with vinegar wet water, gently rub it repeatedly with a steel wool ball, and then dry it.

If there is food residue, after washing with water, dry it in a cool place, so that it is not easy to mildew and will not affect the sealing. The longer the steamer is used, the color of the surface of the steamer will change and turn brown.

When storing the bamboo steamer that has not been used for a long time, you can wrap it in plastic film, put more camphor, or put some dry bags, and then clean it when you use it.

The bamboo steamer used each time should be cleaned, placed in a ventilated place to dry, and then put away to prevent mold on the surface of the steamer. If you encounter a moldy place, you can use gauze to gently sand the moldy area.

The cooking and maintenance process of the newly purchased bamboo steamer:

1.Put enough cold water in the pot and pour in a little cooking oil.

2.Place the straw mat in the steamer and put the bamboo steamer in the water.

3.Cover the steamer and cook over medium heat for 20 minutes, paying attention to the changes in the water in the pot to prevent the water from boiling dry (Huixin's intimate tip 3: Cook the steamer with water in order to boil the yellow water in the bamboo).

4.Take out the boiled steamer to dry the water, and evenly brush a layer of cooking oil in the steamer grid (Huixin's intimate tip 4: Bamboo is to be maintained with oil, and the steamer grid is brushed with cooking oil, in order to absorb oil and prevent mildew).

5.Dry in the sun and allow the grease to soak into the bamboo.

The moldy steamer can be used after being cleaned up. Put the moldy steamer in the sun to dry, be careful not to expose it to the sun, just dry it a little, otherwise the steamer will become very fragile. After that, wipe it with alkaline water, or add some detergent, scrub it with a brush, and finally wash it off with water.

The steamer should not be left in a humid environment for a long time, otherwise the steamer will become moldy. The steamer should be placed in a ventilated and dry place to prevent the steamer from becoming moldy.

The moldy steamer must be cleaned for normal use, and it can be cleaned with detergents such as baking soda, liquor, dish soap, etc. These detergents have different cleaning effects, and they can be used separately or mixed together for better cleaning results.

Once the steamer is moldy, there are already many bacteria and mold on it, it should be soaked in water and then scrubbed with detergent, which can be brushed with a brush or wiped with a steel wool ball. If it still doesn't get off, switch to soapy water or laundry detergent.

If soapy water and laundry detergent don't work, buy a mold remover. If the mold is too serious, if you can't get rid of the mold on it, then don't continue to use it, just buy a new steamer.