The water heater is turned on to the maximum in winter, the heat is not enough, and the machine is n

I don't know what kind of water heater you use: a gas water heater can add a small household water pump to the tap water pipe, because the gas water heater is a structure that uses water pressure to ignite the top, and the fire head is large if the water pressure is large, and the fire head is small if the water pressure is small. You don't have to worry about the temperature being lowered by the increased flow of water because the diameter of your water pipe has not changed.

The electric water heater is recommended to change to the current laminar flow structure, and the electric water heater is a large electric kettle, but there is an extra pipe for cold water. The mixing method of the first generation of electric water heaters is called convection exchange, which is like pouring cold water directly into a boiling kettle, so its water temperature drops relatively quickly. The second generation of electric water heater water mixing method is called laminar flow type, as if inserting several partitions in the kettle to separate the hot water into several pieces, and when the cold water comes in, it is not directly injected, but a "compartment" and a "compartment" flow through, so that the water temperature drops more slowly, and the washing time will be much longer.

I used Siemens, and after two winters, it worked quite well.

There is a type of water heater called fully automatic, and you just turn the water down a little bit and the water temperature can be raised. There is also a kind of water heater that uses a mixing valve for hot and cold water, you just need to turn off the cold water, if it doesn't work, you have to refer to the automatic kind of small water heater turned off. If it's not OK, there is only one reason, your home's gas supply pressure is insufficient, and you have to find a gas company!

You can change to a water heater with a larger volume (its heating pipe is much larger, and when the water is turned off, the heat per unit time of heating is much higher!). ）

<> reasons why the temperature of the water heater is getting lower and lower may be the following:

If the gas pressure is too low, once the gas is too small, the temperature of the hot water will be lower and lower.

The gas pipeline is blocked, and after a long time, there will be debris in the outlet nozzle of the gas pipeline, which needs to be cleaned up.

The mode is not adjusted well, the water heater has a winter and summer mode, and we need to adjust the mode to the corresponding season.

If none of the above reasons are correct, it is best to contact a professional repair company. They can provide you with professional technical support.

1. Because the storage capacity of the water heater is limited, in the process of use, the hot water is constantly consumed, and the cold water is constantly replenished, so the temperature is slow and the car celery is burning lower and lower; 2. During the heating process, thick scale is formed around the magnesium rod, which reduces the heating efficiency, so the more it burns, the lower it is;

3. There may be that the rate at which the water heater boils water is not as fast as the rate at which water is used, so the temperature is getting lower and lower.

Let's take a look at water heaters:

Water heater refers to a device that turns the temperature of cold water into hot water within a certain period of time for a limited range (such as home) through various physical principles. According to different principles, it can be divided into electric water heaters, gas water heaters, Fanhe solar water heaters, magnetic energy water heaters, air energy water heaters and other types.

A complete household multi-function water heater consists of 2 main parts: the air-conditioning part and the hot water heating part. These two parts are closely linked, inseparable, and must work at the same time.

That is, to make hot water at the same time as cooling the kitchen, or to make hot water at the same time as cooling the kitchen. Its internal structure is mainly composed of four core components: compressor, condenser, expansion valve, and evaporator.

There are several reasons why the temperature of the water heater is getting lower and lower as it burns down:

1.Damaged water heater elements: If the heating elements of the water heater are damaged, it will cause the water heater to be underheated, which will affect the water temperature rise. In this kind of messy situation, the heating element inside the water heater needs to be replaced.

2.Unstable voltage: If the voltage of the electrical environment is unstable, it will lead to insufficient heating of the water heater, the water temperature cannot be increased, and even the temperature will drop. In this case, it is recommended to consult the local power company.

3.Improper cleaning: If the internal branch or filter of the water heater is not clean, it will affect the smooth flow of water, resulting in the water temperature cannot be raised or lowered. It is advisable to inspect and clean the inside of the water heater regularly.

4.Low outdoor temperature: In winter, when the outdoor temperature is too low, it takes a long time for the water heater to heat up the water to the set temperature, which can also cause the water temperature to drop.

The above are the reasons that may cause the temperature of the water heater to get lower and lower, if you encounter problems, it is recommended to contact a professional for maintenance and treatment.

The heating elements of the water heater, such as the heating tube or the heater start-up, may be faulty or damaged, resulting in the inability to heat the water to the desired temperature, thereby lowering the hot water temperature.

1.The internal temperature controller of the water heater is malfunctioning;

2.The internal pipes of the water heater are blocked;

3.The internal heat exchanger of the hot worship water vessel is damaged;

4.The water level inside the water heater is too low;

5.The internal fuel consumption of the water heater is too fast;

6.Poor internal combustion of the water heater;

7.Poor circulation of hot water inside the water heater; Zen respect.

8.Faulty internal temperature sensor of the water heater;

9.Failure of the internal temperature regulator of the water heater;

10.The temperature controller in the water heater is faulty.

The gas is gone, it doesn't burn.

Reasons and solutions for the temperature of the electric water heater not to go up:

1. It may be that there is too much scale in the electric water heater, which ultimately leads to the heating effect of the electric water heater is not obvious.

Solution: Find a professional to clean the scale in the water heater.

2. It may be that the temperature sensor in the electric water heater is out of order, which eventually leads to abnormal temperature sensing of the electric water heater, and the heating cannot achieve the expected effect.

Solution: It is recommended to contact the after-sales service of the electric water heater and find a professional for inspection and maintenance.

3. It may be that the motherboard of the electric water heater is faulty, and finally the temperature fails.

Solution: It is recommended to contact the after-sales service of the electric water heater and find a professional for inspection and maintenance.

4. It may be that the ratio of cold water to hot water in the mixing valve is out of balance, which eventually leads to the low water temperature in the electric water heater.

Solution: Adjust the amount of water in the cold water valve and hot water valve appropriately.

5. It may be that part of the electric heating pipe in the electric water heater is damaged, resulting in poor heating effect.

The gas water heater can see if the gas is burning.

The instantaneous electric water heater does not heat, and the power supply is normal, which may be the heating rod is broken.

There is no repair value and it is recommended to replace it directly.

The tank-type water heater can be repaired in time.

Cause. 1. The voltage is too low, resulting in a decrease in the power of the branch and a decrease in temperature;

2. Personal sensitivity to temperature has changed

3. Or the ambient temperature is lower than that of the previous year;

4. The heating device of the electric heater is aging in advance (this probability is relatively rare).

First of all, check whether the power supply, switches, etc. of the water heater are normal, and whether the heating device inside the water heater is broken. If there is no obvious problem in the above two points, it can be considered that the internal scale accumulation of the water heater is due to the long-term use of the wide and pure code, and it is necessary to clean and maintain it or be more careful about which heating device is replaced.

It may be a problem with the voltage, and if it is permanent, it will also cause the power to drop, and the temperature drop will not be very hot.

Summary. Why is the water heater either very hot, or not hot enough, hello! The water heater is either very cold or very hot, first, that is, there is too much scale in the water heater, which may lead to uneven heating of the heating pipe, second, it may be that the hot and cold water valve of the water heater is broken, and the size and flow of hot and cold water cannot be adjusted, and third, it may be caused by the unstable water pressure of the tap water, and the water pressure is high and low, just these reasons.

Hope it helps!

Why should the water heater be either very hot, or it just not hot enough?

Why is the water heater either very hot, or not hot enough, hello! The water heater is either very cold or very hot, first, that is, there is too much scale in the water heater, which may lead to uneven heating of the heating pipe, second, it may be that the hot and cold water valve of the water heater is broken, unable to adjust the size of the flow of hot and cold water, and third, it may be caused by the unstable water pressure of the tap water, and the water pressure is high and low. Hope it helps!

Hello, dear, thank you for your patience, the answer has been found for you, you check it, thank you!

What is the reason why the water temperature drops several degrees quickly after the water heater is heated and not in use? Thank you.

Hello, I am happy to serve you and give you the following answers: Reasons: 1. The thermal insulation performance of the water heater is insufficient

The thermal insulation performance of the hot shouting tung water device is insufficient, and the water temperature after heating will drop soon, which is caused by the insufficient thermal insulation performance of the water heater. 2. Heat loss of water heater: The heat loss of water heater will also cause the temperature of the heated water to drop very quickly, which is caused by the heat loss of the water heater.

Solution: 1. Replace the water heater: If the thermal insulation performance of the water heater is insufficient, you can consider replacing the water heater to improve the thermal insulation performance of the water heater.

2. Check the heat loss of the water heater: If the heat loss of the water heater is large, you can check the heat loss of the water heater to reduce the heat loss of the water heater. 3. Clean the water heater regularly

Regular cleaning of the water heater can effectively reduce the heat loss of the water heater, thereby improving the thermal insulation performance of the water heater. Personal tips: 1. Check your water heater regularly

Regularly inspect the water heater and find the problem of the water heater in time, so as to take measures to solve the problem in time. 2. Clean the water heater regularly: Cleaning the water heater regularly can effectively reduce the heat loss of the water heater, thereby improving the thermal insulation performance of the water heater.

Summary. Hello, we are happy to answer for you, the main reason is that your gas tank is not supplied with enough gas. It is recommended that you first adjust the pressure regulating knob of the pressure reducing valve to increase the gas pressure, and replace a gas pressure reducing valve with a larger flux produced by a regular manufacturer.

You can borrow a neighbor's house to try it first) If it is confirmed that it is a fault of the machine, it may be that the water heater you are using is an old-fashioned water-vapor linkage valve device. After a long time, the rubber diaphragm in the mixing valve of the water heater is aged or damaged, causing the cold water and hot water of the machine to mix, so the water temperature cannot be adjusted. Changing a diaphragm will solve the problem.

What's going on with the water heater turning up the heat and temperature to the maximum, but the water isn't too hot?

Hello, I am inquiring for you here, please wait a while, I will reply to you immediately Hello, I am happy to answer for you, the main reason is that your gas tank is not enough gas. It is recommended that you first adjust the pressure regulating knob of the pressure reducing valve to increase the gas pressure, and if it is not possible, you will shout that it will collapse and replace it with a gas pressure reducing valve produced by a regular manufacturer with a larger flux. (You can borrow a neighbor's house to try it first) If it is confirmed that it is a fault of the machine, it may be that the water heater you are using is an old-fashioned water-vapor linkage valve device.

After a long time, the rubber interlacing in the mixing valve of the water heater only the membrane is aged or damaged, resulting in the mixing of cold water and hot water in the machine, so the water temperature cannot be adjusted. Changing a diaphragm will solve the problem.

The fire is not turned up much.

Hello, that should be the machine malfunctioning pro.

Yes, what's the problem, what to do.

You need to go to the manufacturer for repair and after-sales.