How to beat walnuts dry, how to punch walnuts

Dry beating walnuts is the walnut powder method:

1. To make walnut powder at home, you should prepare raw walnuts, pry it open and take out the walnut kernels inside, walnut kernels need about 500 grams, black sesame seeds need to prepare 500 grams, and 100 grams of rock sugar should be prepared, and then prepare an oven, if there is no oven, you can also use an iron pot instead.

2. Spread the prepared walnut kernels in the baking tray of the oven, put them in the oven, set the temperature at 180 degrees, bake for about 8 minutes, take out the aspects during the baking process, cool down after baking, if you don't use the oven to bake, you can also put it in the iron pot and fry it slowly, the black sesame seeds should also be fried in advance to cool down, and then put the fried walnut kernels, rock sugar and black sesame seeds in the food processor, marinate them into powder, and you can get the walnut powder after taking it out.

How to eat walnut powder:

1. Eat directly.

Walnut powder is a delicious ingredient that can be eaten directly, it tastes particularly fragrant, people can directly go to 10 20 grams in their mouths when they need it, drink ten or two cups of boiling water and swallow it directly, so that they can taste the original taste of walnut powder, but some people will feel that he is more tired when eating walnut powder directly, so you can put it in a bowl, add an appropriate amount of boiling water and eat it.

2. Drink with porridge.

Walnut powder can also be eaten with porridge, especially when cooking white porridge or eight-treasure porridge, you can put the walnut powder directly in the porridge and mix it thoroughly, and then eat it together, so that you will feel that the taste of walnut powder is better, and when drinking soy milk or milk, you can also put in an appropriate amount of walnut powder and mix it well before eating, which will allow the human body to absorb richer nutrients and relieve the greasy feeling of walnut powder.

1. Prepare walnuts and files.

2. First of all, pick the round kernel of the general size, and the walnut should be the best size and appropriate, so that it can be seen more beautifully.

3. Then use a file to manually repair the round, and further grind the circle with a hole opener, and carry out the next step of the optimizer.

4. Then use sandpaper 400 mesh coarse grinding, and then polish with 2000 mesh. You can polish a good-looking peach with a good core.

1. First of all, prepare tools: small electric drill (small electric grinder), choose the size of the drill bit according to your needs, generally one point five is enough.

2. Take the pure core of the peach and take the electric grinding steadily. The reason for taking the peach pit is to adjust it in case of an accident, so it is convenient to get rid of it.

3. Hold the electric mill steadily for alignment, it must be light at the beginning, not in place at once, and adjust it while playing.

4. After punching the hole, gently knock out the residual walnut foam in the hole.

5. Do not pad cloth and smooth royal hole things under the peach pit, so as not to have an accident, and disassemble the cardboard vertically.

Materials: Peach pits, brushes, brushes, small drill bits, crochet hooks, elastic ropes.

Method: 1. Peel and dry wild walnuts, and be careful not to dry them directly in the sun.

2. Use a brush to smooth the edges of the peach pit and try to make it look as round as possible.

3. Next, use a brush to brush the impurities on the surface of the peach pit.

4. Then use a small drill bit to drill two small holes on both sides of the peach pit, be careful not to drill directly from one side to the other, so that the drilled holes are not straight.

5. After drilling the hole, use a crochet needle to go through the hole to hook the elastic rope on it, and finally tie the elastic rope tightly in turn.

First, the easiest way to polish walnuts:

1. First of all, pick the round pit of the general size, and the peach pit should be the best size and appropriate, so that it will be more perfect.

2. Then use a file to manually trim the round, and then use the hole opener to further grind the round, and carry out the next step of optimization.

3. Then use sandpaper 400 mesh coarse grinding, and then polish with 2000 mesh.

Second, the peach pit classification:

1. Brain pattern peach pit: For the selection of brain pattern peach pit, the peach pit with hard injuries should be eliminated first, such as damaged, moth-eaten, and pubic skin. The pile shape should be as round as possible, and the fuller the grain, the better. The larger the size**, the higher.

2. Dragon pattern peach pit: The dragon pattern peach pit has sharp points at both ends, which is not as smooth as the brain pattern peach pit and is not big. Many people use small dragon pattern peach pit skewers to make 108 long strings, which is very beautiful to play.

3. Monkey pit pit: Monkey pit is also known as golden monkey pit, which is a kind of peach pit imported from the United States.

4. Peach peach: Peach pit seems ordinary, if you want to pick a string of extreme size, it is not easy to have excellent cortex.

3. How to play:

1. Dry first and then sweat: At the beginning of the peach pit bracelet, remember that you need to play with dry hand. This is the same as playing with wooden skewers, to avoid the peach pits turning black and black.

Friends with sweaty hands should pay attention to changing hands frequently when playing, and in the later stage, after the peach pit has a certain polishing and hanging porcelain, you can use sweaty hands to color.

2. Long brush unremittingly: The peach pit has a very interesting feature, that is, the new peach pit will give birth to insects", so when we get the new peach pit, we need to use a crochet needle and a brush to carefully clean it, especially the hole part, which can be repeated several times with a thick rope to bring out the dregs inside. The texture of the peach pit is deep and not easy to reach, which is similar to King Kong and walnut, so the metaphor of "three-point plate and seven-point brush" is also applicable in the peach pit.

In addition, the peach pit cortex is soft, so it is recommended to prepare two brushes, one hard and one soft, so that you can use them selectively when cleaning.

3. Oily use: According to the physique of different people, for those who are not born to be oily, you can consider using olive oil to play with the plate. But here, as in the oiling method of olive pits, the emphasis is on sparing".

To use it, put a little olive oil in your hand, spread it on top of the peach pit bracelet, and then brush it repeatedly with a soft brush. The aim is to evenly coat the peach pits with the oil and gradually remove it.