Can you use sewing agent for the bathroom floor, and whether the bathroom is sewing or caulking

Updated on home 2024-07-13
15 answers
  1. Anonymous users2024-02-12

    It can be used, but you need to make a caulk first, and now there is a kind of Nano Ceramic Clay material of Chengbang, which is even better than the effect of the beautiful sewing agent! Waterproof performance and aesthetics are classy! Many hardcover families use this kind of home.

  2. Anonymous users2024-02-11

    Yes, it is recommended to use epoxy resin material, <>

  3. Anonymous users2024-02-10

    If it can be used, fill it with caulk first and then apply it with beautiful sewing agent.

  4. Anonymous users2024-02-09

    The bathroom needs to be sewn.

    Because the sewing agent looks better than the white caulk, and has the functions of waterproof, mildew resistance, etc., but many people will still find the problem of mildew after using the sewing agent, which is due to the different categories of sewing agent, it usually has two categories: watery and oily, of which the water-based ingredients are simple, and it is easy to become mildew and black if it is in a dark and damp place for a long time.

    It is also a kind of double-share sewing agent, the main ingredients are epoxy resin, high-grade pigments and curing agents, etc., which can be mildew-proof, waterproof, black-proof, and used for a long time, even if it is used for twenty or thirty years, there is no need to worry.

    The detailed steps for the bathroom to be suitable for sewing are as follows;

    1. Prepare materials first, such as sewing agent, knife, tape, cleaning sponge, pressing plate, etc.

    2. Shovel the wall joints first, take a knife to shovel out the dirt putty in the wall cracks, leave the corresponding space, it is best to do it several times to ensure that the gaps are clean, and then open a 45-degree opening at the front end of the prepared beauty sewing agent, and load the beauty sewing agent into the plastic head, which can generally be filled in the glue gun.

    3. Squeeze the beauty joint against the wall joint, pay attention to the appropriate, otherwise there will be a waste problem, but it should not be too little, otherwise it will not be able to ensure that the filling is full, and it must be stable and uniform.

    4. After the sewing agent is filled, it needs to be flattened, and the pressure plate is pressed into the gap from the front to the back to ensure that it is tight.

    5. Finally, you need to clean the wall, you need to use a sponge to remove the residual sewing agent, scrub at the same time, do not let the sewing agent on the sponge enter the wall again, pay attention to the actual operation must speed up, otherwise the coagulation of the sewing agent will have to be removed with a knife.

    The villa master provides you with local building policies, building drawings, and villa design drawings;

    Villa appearance renderings service, thousands of popular drawings for you to choose.

    Villa Master.

  5. Anonymous users2024-02-08

    If the gap between the bathroom tiles is less than 1 mm, you can choose caulk, which will be easier to operate, if the gap is relatively large, you can consider using the caulk.

    Both the sewing agent and the caulk have a good anti-mildew and waterproof effect, although it does not look much different, but the difference will gradually appear after a long period of use. Because the sewing agent is more resistant to dirt and waterproof than caulk, it is not easy to turn black and yellow when used.

    Although the beauty sewing agent is a substitute for caulk, it is also an upgrade of caulk, whether it is in performance or essential quality, it will be better, so it will be higher. If you fill an ordinary bathroom at the same time, the caulk may only cost a few dozen dollars, while the cost of the sewing agent may be several hundred dollars.

    Quality issues that should be paid attention to

    1. The horizontal and vertical seams are uneven: the horizontal and vertical seams are not properly connected with the horizontal seams, the hooks are not carefully and repeatedly, and the horizontal and vertical seams are not cleaned when the seams are swept.

    2. The ash around the door and window frame is not strict: the door and window frame is not plugged as a process of strict requirements, the construction is not serious, and the ash is only taken care of the surface, and is not stuffed inside.

    3. The depth of the seam is inconsistent: the gray seam is drawn in different shades, the operation is not serious, and the technology is not proficient.

    4. There are narrow seams and blind seams: there is no careful inspection before hooking, and there is no open seam treatment for narrow seams and blind seams.

    5. Seam leakage: waist line, lintel, first skin brick and door and window brick wall side often leak hook, the operator should repeatedly find the missing hook and make up the hook in time.

  6. Anonymous users2024-02-07

    It is recommended that you use caulk first, wait for the caulk to dry (at least 48 hours after construction), and then use the beauty caulk to apply, this effect is the best! Of course, if you don't consider the cost, you can use the beauty sewing agent directly.

    OLY

    Introduction: It is used for the beautification and repair of tiles, mosaics, stones and other gaps and corners; Kitchen and bathroom, ceiling, wallpaper, doors and windows and other building materials for corner decoration. The beauty of the caulk is the upgrade of the caulk, the decorative practicability of the caulk is obviously better than the color caulk, kitchen, bathroom wall and floor tile joints will be yellow and black after a period of time, the imported caulk can not do anything to solve the problem, now there is a solution, is to use tile caulk.

    Nowadays, the living room, kitchen and bathroom of the home usually encounter the problem that the tile gap turns from white to black, unhygienic and affects the appearance, and the brick joint becomes black, and even breeds bacteria, produces peculiar smell, which will harm human health, especially in summer. It is characterized by rich color, natural and delicate, glossy, non-fading, and strong decorative effect, which can be matched with tiles of different textures and different colors, and integrates the gorgeous brick joints and tiles into one, which can enhance the overall beauty of the wall and ground.

    Construction method: 1: Install the sewing agent on the special nozzle. 2: Load the booster applicator. 3: Press the glue gun to knock off the gel about 30 cm in front to avoid uneven mixing. 4: Evenly and vigorously glue.

    Precautions: 1: The remaining material of the colloidal after construction should be removed with a rag or shovel before it is completely cured within 24 hours.

    2: If the construction process is interrupted for more than 20 minutes, the colloid begins to solidify, and the nozzle needs to be replaced.

    3: Before construction, you need to make sure that the base surface is free of impurities, oil, water, dust, etc.

  7. Anonymous users2024-02-06

    Hello, because the bathroom is an extremely humid place, the tiles will often come into contact with moisture, so the tile gaps are easy to dirt and mildew, and in serious cases, it may affect the health of the family. Therefore, it is necessary to sew the bathroom beautifully. It should be noted that the bathroom needs to keep the floor dry and clean before doing beauty sewing.

    Because once the water vapor enters the beauty sewing product, it will affect the effect of the beauty sewing construction. When sewing in the bathroom, you can choose a series of products such as Diamond Epoxy sewing agent, which has good waterproof performance, and is environmentally friendly, mildew and antibacterial, tough and non-cracking, which is very suitable for caulking and sewing in the family, kitchen and bathroom environment. I hope my answer will be helpful to you.

  8. Anonymous users2024-02-05

    Generally do beauty sewing,The bathroom is a damp area, washing and rinsing, the floor is easy to be dirty, damp, and it is better to use a beauty sewing agent than a traditional caulk. First of all, it is more beautiful than the caulk, the sewing agent is dirt-resistant and easy to clean, and the second is that it does not change color, and the sewing agent does not change color and does not become moldy. For bathroom tile joints, it is better to close them with beauty joints.

    The floor of the bathroom should be dry, clean the gaps, and then carry out construction, and the bathroom needs to be dried for a longer time.

    Precautions for doing beauty sewing.

    1. Powdered items cannot be used instead of grouts for priming.

    When doing the construction of the seam, it is necessary to pay attention to the cleaning of the gaps between the tiles, and if it is dry, it can be constructed, especially when using the method of half-filling, the bottom should be made with caulk, and it cannot be replaced by powdered items, which can not be bonded.

    2. It cannot be constructed in a humid environment.

    It is best not to be in a very humid environment on a rainy day, because the water vapor in the air can easily penetrate into the sewing agent, affecting the curing of the sewing agent, and then let the sewing agent change color, even if the ground is dry, the sewing agent can not stick to the water before it is cured, and it will be completely cured in 24 hours, and the main caulk can not be done before it dries.

    In addition, when doing beautiful sewing, it is best to prepare a vacuum cleaner, which can clean up the dust in the construction process, keep the ground dry, and pay attention to the glue extruded on the ground, if the glue is not completely dry, the glue is easy to get on the shoes.

    3. Use masking paper.

    Masking paper is one of the tools for the construction of the seam, if the tile in the home is selected antique brick or waxed tile, it is best to use the masking paper to help in the sewing process, so that the construction effect is better, and other tiles can be used without it.

  9. Anonymous users2024-02-04

    In fact, the beauty of the joint agent and the caulk are used to fill the gaps of the tile is a substance similar to colloid, in the past two years, it is very popular to use the beauty of the joint to the tile, which looks beautiful and practical, but it is more expensive. The role of caulk and beauty sewing agent is the same, but the waterproof is relatively poor, but it is cheaper. 1.

    Choose according to the tile gap, because the size and material of the tiles on the market are also inconsistent, and we choose different tiles after the gap is also large and small. Generally, it is recommended to use beauty sewing agent to fill large gap flowers, because it has a variety of colors, and the aesthetics are relatively high, and it is more convenient in the future. The caulk is suitable for tiles with small gaps, which is easy to operate, has a good effect, and is cheap.

    2.Although it is more expensive to choose the sewing agent according to the future effect, its waterproof and mildew resistance are the best, even if it is used for a long time, you don't have to worry about the problem of black and mildew, and you can also choose the color of the sewing agent according to the decoration style, and the manuscript will look more beautiful. Relatively speaking, the aesthetics of the caulk will be poor, and it will begin to slowly blacken after a long time, and then it needs to be re-constructed, which is more troublesome.

    3.According to the overall practicability to choose the beauty of the sewing agent to use the effect of the lead fruit is better, but it is relatively high, the general beauty of the work is according to the number of square meters of the tile to charge, if the area of the beauty of the seam is needed, the cost of nature will be higher. The caulk is cheap, used more, and the area is large, and you will not feel distressed, but the biggest disadvantage is that the caulk will turn black after being used for a long time, and the waterproofness and aesthetics are not guaranteed.

  10. Anonymous users2024-02-03

    Now there is a kind of Nano Ceramic Clay material of Chengbang, which is even better than the effect of the beautiful sewing agent! Waterproof performance and aesthetics are classy! Many hardcover families use this kind of home.

  11. Anonymous users2024-02-02

    Fill the caulk first and then apply the sewing agent.

  12. Anonymous users2024-02-01

    Toilet materials are best made of plastic.

  13. Anonymous users2024-01-31

    Tiles will use beauty sewing agent, what material is the beauty sewing agent made of? You'll know after reading it.

  14. Anonymous users2024-01-30

    Isn't the bathroom just a floor tile?

  15. Anonymous users2024-01-29

    Bathroom is an area with more frequent water use, how to choose bathroom tiles is related to our future safety, let's take a look at the bathroom tiles can be used with beauty sewing agent and bathroom safety knowledge.

    Kitchen and bathroom tile selection can also be used to gently tap the tile with a hard object, the clearer the sound, the higher the degree of porcelain ring, the better the quality, if you find that the sound is dull and turbid, it is the next grade.

    The sewing agent is made of organic chemical materials, which is in the form of a paste before use, and becomes a tape after the belt is filled, a bit like glass glue. Caulk is made of inorganic materials with color pigments, which is powdered before use, and becomes a lump after the caulk dries. Kind of like white cement.

    The difference is: one is organic and the other is inorganic. Organic aging resistance is poor, and it cannot withstand wind and sun.

    Generally, exterior wall tile caulking is made with caulk, and indoor caulking can be selected with caulk or beauty caulk. The sewing agent will be more beautiful to use, more high-end, and suitable for use in interior decoration. It depends on the specific construction requirements.

    Both products are easy to apply when used.

    The above is the bathroom knowledge shared with you, I hope you like it.

Related questions
22 answers2024-07-13

Tile joints can effectively solve the problems of blackening, falling off, and peculiar smell between the gaps of ceramic tiles. >>>More

10 answers2024-07-13

The slope of the bathroom is a problem that needs to be paid attention to at the beginning, the best way is to rework, of course, it is recommended to do a little more if you can't rework now, and the following are a few treatment measures. >>>More

17 answers2024-07-13

If there is water seeping at the bottom of the toilet toilet, check whether it is a leak in the toilet flush, or a leak caused by a blockage under the toilet, or the toilet is permanently loose, or the toilet is not installed properly and there are gaps, or it is caused by uneven floors, etc. >>>More

8 answers2024-07-13

The bathroom is an extremely humid place, and the tiles will often come into contact with moisture, so the gaps in the tiles are very easy to get dirty and moldy, and affect the health of the family. Therefore, it is necessary to sew the bathroom beautifully. >>>More