Who knows the process of making glasses? Handmade glasses

Polishing the lenses first, then choosing a frame. I fix the lens to the frame.

To make handmade glasses, you can use colored clay to pinch a pair of glasses, and to pinch out the frame and lenses, start pinching the glasses below.

Dough. 01 Pinch your glasses, you only need two colors of colored clay.

02 Pinch two semicircles in white and use them as frames.

03 Pinch two ovals with blue and glue them to the white frames as spectacle lenses.

04 Pinch a small round strip with white and stick it between the two frames to connect the two lenses.

05 Rub two thick strips with white and stick them to the ends of the two lenses respectively as glasses legs, and the handmade glasses are finished.

Production process: 1. Measure the geometric center distance of the frame: prepare a pair of unprocessed and dismantled rimless glasses frames, and measure the geometric center distance of the frames of rimless glasses with a pupillary distance ruler.

2. Place the frame: Put the frameless glasses frame with the lining plate on the focimeter measurement bracket, the power of the focal point does not need to be turned on, and the left and right frames are in contact with the lens table.

3. Adjust the position of the baffle so that the measuring hole is close to the center of the liner, lift and lower the fixing bracket to fix the liner, and mark the three printing points.

4. Lift the fixed bracket, remove the large frame, and connect the three imprints into a straight line with an oil pen and a pupillary distance ruler, which is the horizontal reference line.

5. Use a sleeve to disassemble the rimless frame, and place the parts neatly.

Principle: It is the principle of lens imaging.

There are at least more than 100 processes for a pair of metal glasses frames, from accessories to processing of semi-finished products to the factory, welding, polishing, to electroplating, assembly of finished products, packaging and shipment. The process is different for different materials and different styles. And a single manufacturer can not complete the production of a pair of glasses at all, there must be multiple manufacturers to cooperate with each other.

Therefore, optical factories are all built in the form of bases, and a single or several optical factories cannot be generated at all, (unless there are collective factories with tens of thousands of people, all of which operate in one stop), unlike other factories that can produce and operate separately anywhere.

From the purchase of raw materials back to process into a single small accessories, generally the work of the accessories factory, and then after the parts polishing and other processing to the glasses factory, each part of the welding assembly, polishing, and then electroplating to the electroplating plant, after the electroplating back for finished product assembly and processing (each part in the assembly of many processes to be processed), to the quality inspection packaging shipment.

Welding materials include: white copper, brass, high nickel alloy, titanium alloy, titanium, stainless steel, plate, PC material, etc.

The metal frame has titanium, white copper, red copper, stainless steel, etc.! There's also a plastic shelf. There are more processes...

1.Hygienic cleaning work.

2.Adjust the equipment to let the machine start into standby state.

3.The audit of the products to be processed, i.e. the quality inspection of the frames and lenses, and the verification of the fitting data.

4.Focal power test, detection power, fixed optical center point.

5.Scan positioning, determine interpupillary distance, upper suction cup.

6.Trimming processing.

7.Wash the chamfer.

8.Full frame, half frame slotted, frameless punching.

9.Glasses fitting, if the lenses are too thick, they need to be thinned.

10.Frame shaping.

11.Data detection, if Song Chi is unqualified, it needs to be reprocessed.

12.Wash the packaging and check the appearance quality of the equipment glasses.

13.Glasses out of the warehouse.

Glasses consist of lenses, frames. There are 15 types of myopia glasses, farsighted glasses, reading glasses and astigmatism glasses, flat glasses, computer goggles, goggles, swimming goggles, night vision goggles, e-sports game goggles, e-sports goggles, goggles, sunglasses, toy glasses, and sunglasses.

Summary. Hello dear, what is the glasses used for this question you asked is very simple, I will come to you: metal materialsThe metal materials used for glasses frames have three categories: copper alloy, nickel alloy and ***.

Hello dear, Yuyan, what are the glasses made of, and I come to you: metal materialsThe metal materials used for glasses frames are copper alloys, nickel alloys and three categories.

1.It is required to have a certain hardness, softness, elasticity, wear resistance, corrosion resistance, light weight, gloss and good color, etc.

2.Plastics or resins are used to make non-metallic materials for spectacle frames, mainly using synthetic resins as raw materials, which are divided into two categories: thermoplastic and thermosetting resins.

3.The natural materials used to make spectacle frames are tortoiseshell, special wood, and animal head horns. Wooden spectacle frames and horn frames are rare, and tortoiseshell spectacle frames are common.

4.The frame is made of a mixture of metal and plastic.

6.The above is the content of my reply, you need to wear a mask, wash your hands frequently, and keep ventilated when traveling during the epidemic! Protect yourself.

7.I hope I can help you, and I wish you a happy mood, good health, all the best, and a happy life.

Handmade glasses: <>

First of all, prepare a square of handmade paper, and choose the square handmade paper as the material, because it has the advantages of being light, thin and easy to fold, which is convenient to make.

The diagonal folds along the diagonal of the square handmade paper and makes the two corners coincide.

Fold the top corner of the two overlapping corners down a little bit to form a small corner.

Then turn it upside down, along the bottom edge of the top, and fold it down about 4 creases to form it.

Fold back a small piece of the sharp corners on both sides of the state to serve as the part of the ear where the glasses are placed.

Then fold the part inside the body to the back of the bureau, and then this part is used to fold the frame of the glasses.