How to look at the reversing image, how to see the reversing image of the car

Once you've installed it, put on Reverse gear (R) and your display will automatically appear at the rear. Of course, the premise is that your display or *** must be turned on. When an image appears, a blue line or a red, yellow, and blue line may appear on the image.

If it is tricolored: the blue line is the distance between the obstacle and the rear of the car, and the car can be reversed. The yellow line is 60 cm from the rear of the car, and the red line is 30 cm from the rear of the car.

That is to say, when you reverse the car and the car reverses near the red line, you can't reverse again, and that position is just right. It's all blue lines, basically the same as the three colors above, but the colors are different, and the closer to the rear of the car is the warning line, prompting you to reverse. In the image you can see the real thing that is a little bent, and that is your bumper.

Specifically, you can find someone to try the distance behind your car, what is the right location? It's good if you get used to it.

There are mainly three colored lines on the reversing image screen, and some people don't understand what it means, but in fact, these three colored lines represent the different distances between the obstacle and the rear of the car.

Reversing image is also known as parking assistance system, or reversing visual system, vehicle monitoring system, etc. The system is widely used in all kinds of large, medium and small vehicles reversing or driving safety paving fields.

Hello, you can see the image behind your car when you put on reverse gear. If I can help you, please set it to, thank you!

The view of the reversing image is as follows:

1. Reversing image is also known as "parking assistance system", when the reversing image is opened, there will be three lines of different colors, these three lines are the trajectory of the reversing image, and the color is generally red, yellow and green.

2. The red track attitude disturbance indicates the warning line, the distance from the tail of the car is 30cm, the car is near this line, the parking space is just right, and the car can not be reversed, the yellow track indicates the deceleration line, and the distance between the rear of the car is 60cm, you can continue to reverse backwards, pay attention to deceleration to check the distance, the green track represents the normal safety line, the distance between the obstacle and the rear of the car is larger, you can rest assured to reverse the car.

3. Because there will be a blind spot behind reversing, the reversing image is to install the reversing camera at the rear of the car, when the reverse gear is hung up, the system will automatically turn on the camera located at the rear of the car, and display the situation behind the car on the LCD screen of the central control or rearview mirror, which can assist in completing the reversing storage or other actions through the first image.

How to reverse

Before reversing, you should see the situation behind the car, estimate the route of reversing, make sure that in the process of reversing, the front of the car will not touch obstacles, and then perform reversing, try not to step on the accelerator when reversing, and control the speed. Turn the steering wheel with your left hand according to the direction of travel at the rear of the car, and turn the steering wheel to the right if the rear of the car needs to travel to the rear right.

Otherwise, turn the steering wheel to the left. In fact, this is the same as the steering operation when the car is driving forward, so you will not miss the wrong direction and be in a hurry. Do not keep looking at the back of the car during the reversing process, on the premise of confirming the safety of the rear of the car, you need to observe the left and right reversing mirrors from time to time, pay attention to the distance between obstacles and the body, and use the steering wheel to correct the position of the body when it is retreating.

If you feel that the front of the car may hit an obstacle during the reversing process, you need to look at the front of the car properly to avoid the front of the car from hitting the obstacle. Especially in the case of a large amplitude of steering wheel rotation, the turning radius of the steering wheel is greater than the turning radius of the rear wheel, and the head of the car is thrown outward when reversing, so it is necessary to pay attention to the front of the car to prevent collision.

Summary. The following is the observation method of the reversing image: 1. The reversing image is also known as the "parking assistance system", when the reversing image is turned on, there will be three lines of different colors, these three lines are the trajectory lines of the reversing image, and the colors are generally red, yellow and green.

2. Red track: indicates the warning line, the distance from the rear of the car is 30cm, the car is near this line, the parking space is just right, and it can not be reversed; Yellow track: indicates the deceleration line, the distance from the rear of the car is 60cm, you can continue to reverse backwards, pay attention to deceleration to check the distance; Green Track:

It indicates the normal safety line, and the distance between the obstacle and the rear of the car is large, so you can reverse. 3. Because there will be a blind spot behind reversing, the reversing image is to install the reversing camera at the rear of the car, when the reverse gear is hung up, the system will automatically turn on the camera located at the rear of the car, and display the situation behind the car on the LCD screen of the central control or rearview mirror, which can assist in completing the reversing storage or other actions through the first image.

The following is the observation method of the reversing image: 1. The reversing image is also known as the "parking assistance system", when the reversing image is turned on, there will be three lines of different colors, these three lines are the trajectory lines of the reversing image, and the colors are generally red, yellow and green. 2. Red track:

Indicates the cordon, and the rear distance is 30cm, the car to this line nearby, the parking space is just right, can not reverse; Yellow track: indicates the deceleration line, the distance from the rear of the car is 60cm, you can continue to reverse backwards, pay attention to deceleration to check the distance; Green track: indicates the normal safety line, the distance between the obstacle and the pure tail of the car is large, and you can rest assured that you can reverse backwards.

3. Because there will be a blind spot behind the reversing, the reversing image is to install the reversing camera at the rear of the car, when the reverse gear is hung up, the system will automatically turn on the camera located at the rear of the car, and the situation after lifting the car will be displayed on the LCD screen of the central control or rearview mirror, and the image can be used to assist in completing the reversing or other actions.

You've done a great job! Can you elaborate on that?

That's how the reversing camera works.

Start the car, put on the reverse gear, and the display screen will automatically display the situation behind the car. The image may show red, yellow, and blue lines, or it may be all blue lines. Nowadays, however, the same blue line is rarer.

The red arc represents the trajectory line of the rear wheel when reversing after the steering wheel is killed.

Yellow marking: regarded as a deceleration line, the distance between the bottom of the line and the rear of the car is 60 cm, and you can slow down and continue to reverse.

Green marking: represents the actual trajectory line of the rear wheel when reversing in the current state.

Reversing image line color car distance situation green line: the distance between the obstacle and the rear of the car is large, you can reverse the sign: safety distance yellow line:

60cm distance from the rear of the car: gradually pay attention to the distance from the red line: 30cm distance from the rear of the car.

The car is near this line, the parking space is just right, and it can not be reversed. Signs: If the warning line is all blue line, it is basically the same as the above, and the nearest teasing line from the rear of the car is the warning line, prompting to stop reversing.

The real thing in the image is a little curved is the rear bumper of the car.

The specific distance of the ordinary reversing image is not clear, and the image changes with the different installation height angles. It is best to shine a little bit of the rear bumper when installing. This is safer and more accurate.

No reversing track image image image is clear, there is no reversing auxiliary line, not very practical, it is not recommended to install the reversing track image function to display the reversing image, there is a virtual line road to guide reversing, reversing is convenient, common in high-end cars. There are also a lot of accessories that can be retrofitted.

It's not enough to have a reversing image, the most important thing is to see more, slow and steady. Take your time to find the reversing position that suits you best.

1. Reversing image formula: The safe distance is green, then yellow after 50 minutes, and red for the last 30 minutes. The units here are all centimeters.

It is a safe distance, about one meter, indicating that the car still has a reversing distance. When the reversing image of the car shows that the object behind it is near the yellow box, it is time to control the speed of the car. At this point, it is only 50 centimeters away from the object behind it.

If you don't drive at a low speed, it is easy to cause accidents. When a rear object appears near a red box, it means that parking is available. At this point, the rear of the car is only 30 centimeters away from the object behind it.

The green sign line is also called the safety line, and the bottom of the green frame line is still a certain distance from the rear of the car, and you can safely reverse in this area. 2. Yellow marking: Yellow marking is also called deceleration line. The distance from the bottom of the yellow frame to the rear of the car is about 60cm.

At this point, you'll need to slow down quickly and be careful not to hit the obstacles behind you. 3. Red marking line: Red marking line is also called warning line. The bottom of the red frame is only 30 centimeters from the rear of the car.

If the obstacle behind you has touched the red line, it means that it is close to the rear of the car, and the car can choose to stop. Although the position of the reversing image will indicate that the lead deviates from the actual situation, as long as you follow the prompts of the reversing image, parking is safe.