How do I remove marks from the floor after the toilet is moved?

Introduction: Some people may choose to remove the toilet bowl during the renovation process, and at this time you can use toothpaste to wipe off the marks on the floor. Because toothpaste has a strong cleaning power, and toothpaste can also remove some odors.

In the process, you can also try to use some detergent to clean the marks on the floor. Because the cleaning effect of the detergent is relatively good, and it does not require too much effort in this process. <>

Many people will choose to install a toilet in the process of decorating the bathroom, but in the process of later maintenance, everyone will feel that the toilet is very inconvenient, and some people will choose to remove the toilet or move it to the side. When you move the toilet over, you will find that the marks on the floor are very difficult to clean, and even look particularly unsightly. At this time, you can try to use toothpaste to clean these traces, because the cleaning ability of toothpaste is very strong, and at the same time, it can play a role in eliminating odors in the process of cleaning traces.

There are also some people who feel that it is very wasteful to clean up these marks with toothpaste, because the ** of toothpaste is relatively expensive. At this time, you can also try to use detergent to clean these traces, and the process of using detergent can also save a lot of time and effort. The cleaning power of the detergent is very strong, you can spray some detergent on the traces first.

After about 20 minutes, you can gently wipe off the marks. And in the process of wiping these marks, it does not take too much effort, and at the same time, it will not be on the floor tiles.

Deal damage. <>

In fact, when the toilet is removed, the marks on the floor can be removed by some other methods. Because there are many cleaning products on the market, and these products are very effective. But in the process of buying these products, you must buy some products with guaranteed quality.

Because in the process of using detergents, some harmful gases may also be generated, which will also cause harm to everyone's body in the process. Therefore, the brand of detergent is also very important, so everyone tries to buy it on a regular platform.

You can use a cleaning ball to get a little dish soap on it, and then carefully wipe the marks with your hands, or just wipe it with a wet wipe.

Use a special detergent and floor stain remover, you can sprinkle some dish soap, and the laundry detergent can be brushed with a brush to remove the traces.

It can be removed with oxalic acid and brushed vigorously with a brush so that it does not leave marks and looks very clean.

The toilet bowl is a sewage container, and during use, there may be some stains around the toilet. If the toilet bowl is stained, it needs to be cleaned. To move further, you have to raise the floor of the restroom and add a trap while moving the pipes.

The trap is used to prevent odor backflow. Since the diameter of the drain pipe is generally 110mm, the ground should be raised by at least 120mm to allow room for the slope of the cement mortar and downspout.

The interface between the different pipes should be checked several times for leaks to ensure that there are no leaks. Seals, glass glue, etc. should not be reduced. There are a few sewer pipes in the bathroom, so don't touch them if you can.

Moving the toilet, if there is no displacement device, can only be used for a longer distance. Because elbow connections are difficult to handle. Because a displaced toilet bowl needs to be tipped over, the toilet base should be permeable.

Ceramic magnets and plastics are difficult to seal securely for long periods of time. Connect the mouth directly with the 110. Floor tiles are laid and the bottom plate of the gear lever is covered, the bottom of the toilet can be in direct contact with the floor tiles and sealed with glass glue.

It can be used for a long time, impermeable, and the mouth is not easy to turn over the water. Waterproofing should also be applied before the retaining tape is applied.

Use a bathroom cleaner, wait a few moments, brush clean when the dirt dissolves and comes off, and rinse with water. Mold and dirt on bathroom walls and ceilings can often be wiped off with a cleaning cloth. Alcohol or bleach can be used, which can also have a good effect.

Wipe the mirror with a cloth stained with detergent, rinse with clean water, and finally wipe dry, severe dirt can be removed with alcohol.

Sprinkle some baking soda or salt, or apply detergent directly to the dirt. After some time, when the dirt is dissolved, you can use a cleaning cloth and clean water to remove the dirt. Drain with lemon, rinse with water and wipe dry.

You can try the blackened area with toothpaste and tooth powder, and the effect will be very satisfying. Pour hot water first, then use diluted bleach to hot water. Once the dirt has come off, rinse with clean water.

For tile joints, a cleaner with a bleaching effect can be used in moldy areas. After waiting for about 30 minutes, you can wipe it clean with a brush or toothbrush.

Oxalic acid can be applied to the place after brushing with a brush and rinsing off with running water; After using the detergent, rub it with a wire brush, be sure to remove all the stubborn stains, and when you can soak it in hot water for a while, do not brush or pull it directly.

It can be cleaned with baking soda, properly with a brush, or with bleaching powder. Sandpaper can also be used for sanding.

You can use detergent, toothpaste, wax, nail polish or paint.

The toilet is a sanitary ware that comes into direct contact with the human body, so daily cleaning is important. Here are some cleaning tips to get rid of dirt with ease. 1. Vinegar descaling method:

Pour the mixture of vinegar and water into the toilet bowl and soak it for half a day, and the dirt will be wiped off. 2. Sandpaper descaling method: use the finest sandpaper to rub the toilet dirt, which can remove the dirt that the detergent cannot remove.

3. Baking soda descaling: Sprinkle baking soda in the toilet, then brew with hot boiling water for half an hour, and the dirt can be brushed off. 4. Bleaching powder solution descaling method:

Wipe it with a bleach solution first, and then rinse it off with water after a while. 5. Homemade small brush to scrub the toilet: the flush toilet produces yellow dirt, which is difficult to clean with a brush, you can tie the waste nylon socks to one end of the stick, dip it in foaming detergent to scrub, clean it for 1 month, and keep the toilet white.

6. Detergent descaling: first put an appropriate amount of water in the toilet, clean it with a toilet brush, then pour in 5-10 ml of detergent or hydrochloric acid solution, apply it evenly with a brush and then scrub it. If the dirt is heavy, you can pour a little more detergent to soak and brush until it is clean.

Hydrochloric acid is very corrosive, if you clean it with hydrochloric acid, you should pay attention to safety and do not splash on it.

Bleach cleaning.

1) You can plug the water outlet hole with a cloth, pour hot water and then dissolve a little chlorine-based bleach. (2) Let it sit for a while, then scrub it with a brush.

Vinegar descaling method.

Pour the mixture of vinegar and water into the toilet bowl and soak it for half a day, and the dirt will be wiped off.

Sandpaper descaling method.

Rubbing the toilet bowl dirt with the finest sandpaper removes dirt that detergents can't remove.

There are four ways to deal with the marks left by the tape: (1) Apply the toothpaste to the double-sided tape and wipe it off little by little with a damp rag. (2) Dip cotton in vinegar, and then apply the soaked cotton to the double-sided tape, so that the whole double-sided tape is soaked, and then we can use a fingernail or ruler to slowly and little by little to remove the double-sided tape.

3) Put the wind oil essence on the double-sided tape, and then wipe it with a damp cloth to wipe it clean. (4) Use an eraser to erase, it may get dirtier and dirtier at first, but the effect will come out after wiping for a long time.

After the toilet is moved, the marks on the ground can be removed with oxalic acid, apply oxalic acid to the ground, brush vigorously with a brush, and then wipe it with water.

All you need to do is use a detergent and then rub it with a wire brush to quickly clean up the floor.

Soak the rag in rice vinegar and wipe the marks left with the rag to remove it.

will leave marks, such as sticking and yellowing marks. If it's because there's glue, shovel it off with a shovel, and if it turns yellow, you can wash it with baking soda and water.

Remove with oxalic acid, rub on the ground, brush vigorously with a brush, and wipe with water. Sandpaper rust removal. For those stubborn dirt, it is difficult to remove with detergent.

You need to do it the smart way. Sandpaper can be used to wipe dirt off the toilet, simply wipe it, and then wash it with clean water.

How to remove toilet stains1. Many friends have also used a brush to brush dirt, but many times the effect is not good, at this time we can make a homemade brush to clean, use special homemade tools to clean the yellow dirt on the toilet, mainly use waste nylon socks to tie it with a stick at one end, and then use a foaming detergent to brush and wash, one a month can keep the toilet white. 2. The vinegar method can remove the dirt of the toilet, and the effect will be particularly obvious, mainly by using the mixture of clear water and river vinegar, pouring it into the toilet bowl and soaking it for 4-6 hours, and then using the toilet brush to easily brush the original dirt, this method is mainly for the removal of a large amount of dirt. 3. Sandpaper descaling, for us, it is not difficult to know the dirt of the small toilet, but the difficult thing is that for those stubborn dirt, it is not easy to remove it with detergent.

It needs to be done in a clever way. Sandpaper can be used to rub the toilet dirt, rub it briefly, and then wash it with clean water.

Baking soda descaling, its initial dirt effect is very good, but pay attention to one point, try to use hot water to soak it, the descaling effect will be better. After soaking, the dirt is wiped off with a toilet brush. To remove the scale of bleaching powder, wipe it with the bleach solution first, and then rinse it with water after a while.

Second, the method of moving the position of the toilet1. To move farther, the floor of the toilet must be raised and a water trap must be added while moving the pipe, which is used to prevent odor from backflowing. Since the diameter of the drainage pipe is generally 110mm, the ground should be raised by at least 120mm to leave some room for the slope of the cement mortar and sewer pipe. In addition to considering the blockage problem, it is also necessary to pay attention to the tightness of the pipe.

This is a repeated reminder from experts to the owners, especially the interface between different pipes, to check whether there are leaks many times to ensure that there is no leakage, sealing rings, glass glue and so on. There are several sewer pipes in the bathroom, don't move if you can! To alter the toilet.

If you want to move a little farther, there is no shift you can use, you can only do it on the sewer pipe. However, this method is rarely used because the elbow junction is more difficult to handle. The horse is on the same plane, and the toilet bowl is turned over because of the shift, so the toilet base is <>

To permeable water, ceramic and plastic is difficult to seal firmly for a long time, I focus on the chisel depth of 3 cm, redo waterproof, use 110 directly to connect the mouth, so that the floor tiles are paved, the bottom plate of the shifter is covered, so that the bottom of the barrel is directly in contact with the floor tiles, and can be sealed with glass glue, which is impermeable for a long time, and the depth of the mouth is not easy to turn over the water. The water retaining strip should also be waterproof before tiling. In this way, moving the toilet is foolproof, and the toilet is re-punched.

1) Drainage: Compartment drainage. (2) Transformation method:

Dig a pit in the ground, dig out the original main branch pipe, connect it with the original main branch pipe with a new PVC pipe, and change the toilet drain to the new location specified by the customer. 3) Under normal circumstances, the location of the toilet designed by the developer is reasonable, the second-hand house of the bathroom is relatively small, and the special shifter is used for moving distance below 15cm. If it is more than 15cm, the floor elevation should be considered.

After the toilet is moved, the traces on the floor can be removed with a special tool to clean the floor, or you can use some water or a brush to remove it.

You can use some dish soap to wash it and then add some white vinegar, soak it for a period of time, and then you can wash it off

You can go to the market and buy a bottle of stain remover and spray it on the marks with the stain remover so that it can be removed.