How to adjust the flame of the gas stove? How to mix the flame of a liquefied gas stove

I use a traditional gas tank, and if the stove itself can't adjust the size of the fire, I will adjust the pressure reducing valve to control the size. The pressure reducing valve is the red valve that connects the cooktop hose to the gas tank, which is rotated downward or upward.

Oh, that's right, isn't there a circular knob on the front of the gas stove, and there is a mark on the left half circle of the big and small fire, and there is a dot on the knob, and the point is against the big fire and the point is the small fire.

Hello dear <>, I'll help you solve this problem. If the flame of the gas stove is abnormal or the color is not blue, it means that there is a problem with the gas stove, we need to adjust it, how to adjust it to achieve the best state? 1. How to adjust the flame of the gas stove 1. Find that there will be four paddles at the bottom of the gas stove, generally two on the left and two on the right.

2. Dial the paddle at the bottom of the gas stove with your hand, don't move too much, and observe whether the color of the flame has changed while dialing. 1. The reason for the abnormal flame of the gas stove 1, sometimes you will find that the gas stove presents a red flame, or the flame is relatively small, it may be because its fire outlet is blocked by oil, which is also the most likely problem after many gas stoves have been used for a long time. 2. Another reason is that when using the gas stove, the air intake is insufficient, which will affect the size and color of the flame, because at this time, the gas combustion is not sufficient, and such a problem will occur.

3. How to deal with the abnormal flame of the gas stove 1. If the flame is found to be abnormal, we can adjust the damper of the gas stove, which is at the bottom of the gas stove, it has left and right sides, generally speaking, there are two on the left and two on the right. Whichever side of the gas flame is abnormal, we can adjust which side. Directly use your hand to dial the paddle at the bottom of the gas stove, and then when you dial it, you can observe whether the color of the flame has changed.

If it is adjusted to blue, it means that it is normal, and the flame has also become larger, which means that the adjustment is correct. 2. Another is to clean the fire port, you can take the upper shelf away, take it down and clean it, there are some dirty things in it, you can poke it with a toothpick or wire, and finally put it under the faucet to flush it. After rinsing, wipe off the water stains on the surface with a dry rag and put it back in.

Turn on the gas stove and see if it has turned into a normal blue flame.

When using a gas stove, you need to know how to adjust the size of the flame. So how do you adjust the flame size of a gas stove? PChouse will take you to find out.

1. Open the stove valve to the maximum. At this time, if the inner and outer cone of the flame is not clear, or even yellow, it means that the air volume is not enough, adjust the damper to increase the air inlet volume until the inner and outer cone of the flame is clear and turns light blue.

2. Close the stove valve. The damper is generally not adjusted for a small fire. If the flame becomes shorter, it means that the air volume is too large, and the valve is slightly smaller.

3. Repeated adjustment, you can get a qualified flame in any state. If it is not adjusted well, it means that there is a problem with the stove. The damper of the gas stove is at:

Hold up the gas stove by hand, and at the junction of the burner and the nozzle there are two strong iron plates (or knobs) with handles, one of which regulates the small fire and the other regulates the large fire; They are all attached to the burner by springing, and the size of the air inlet can be adjusted by gently toggling the handle, thus changing the state of the flame. When the combustion situation is not ideal, such as yellow flame, black flame, the flame is too large or too small, or there is combustion noise, backfire and other phenomena, the ideal combustion condition can be achieved by adjusting the size of the air inlet at the damper.

If you want to adjust the flame of the gas stove, first turn on the switch of the gas stove and check whether the flame is on the high or small side. After the inspection is completed, you can uncover the gas stove, directly remove the screws, take off the cover, and you will see the upper and lower dampers. By rotating the gears inside the damper by hand, you can adjust the size of the flame.

First, turn on the switch of the gas stove and check whether the flame is on the high or small side.

After the inspection, you can uncover the gas stove, remove the screws directly, and remove the lid.

When you take out the lid, you will see the upper and lower dampers.

By rotating the gears in the damper by hand, you can adjust the size of the flame.