How to reset the Little Swan washing machine XQG70 1098CS?

After the computer board of the Little Swan washing machine is powered on, the computer board will be reset (restarted) as soon as the start button is pressed

The E62 speed measurement signal is abnormal, mainly because of the breakdown of the internal thyristor components, and the component board can be replaced.

How to use the Little Swan automatic washing machine.

Preparation Connect the power supply and ensure that the power supply line at home is installed and grounded, otherwise a serious electric shock accident may occur. Install the automatic faucet to ensure that the ground is stable. Put the laundry, detergent and additives (softeners, bleach, etc.) in the washing machine and close the lid.

Step 1 Turn on the power button so that the washing machine can accept the control.

Step 2: Add as much water as you need to wash your laundry.

Step 3 Choose the laundry process: there are four processes: soaking, washing, rinsing, and dehydration, which can be selected according to your needs. When you make a choice, the corresponding process indicator will be on, how many times it is lit, it means that it has to do these procedures, which fruit is pressed to dehydration, it means that it only completes the dehydration program, and nothing else is moved.

Every time you press a button, it will have the corresponding program.

Step 4 There are also standard and soft options, this refers to the strength of the laundry, fast or slow, which refers to the length of time it takes to do the laundry.

Step 5 Press the start button and the washing machine will automatically complete the entire laundry process according to your specified requirements.

Summary. 1. When applying the fuzzy function, as long as you press the start button, the machine will automatically set the water level, washing time, spinning time, and rinsing times according to the weight of the clothes. 2. Manually adjust the water level, and automatically enter the water according to the set water level in the automatic process.

3. Manual adjustment function to achieve single washing, single bleaching, single spinning, and other combinations. 4. Manual adjustment procedures, according to the set procedures, such as saving washing, wool washing, fuzzy control, etc. That's about the above.

How to use the Little Swan XQB55-886FG1 fuzzy control automatic washing machine?

1. When applying the blur function blind code, as long as the start button is pressed, the machine will automatically set the water level, washing time, spinning time, and rinsing times according to the weight of the clothes. 2. Manually adjust the water level, and automatically enter the water according to the set water level. 3. Manual dust adjustment and saving function, to achieve single washing, single bleaching, single drying, and other combinations.

4. Manual adjustment procedures, according to the set procedures, such as saving washing, wool washing, fuzzy control, etc. That's about the above.

The little swan has a computer board.

Take a picture and take a look.

Summary. Hello dear, happy to answer your <>

TG70-1211DXS Little Swan drum washing machine computer version how to restore factory settings is because the washing machine is an intelligent product, it has a memory function, it is recommended to press the pause button directly when running, wait until the washing machine stops working, and then press and hold the power button, turn off the washing machine, and then select a new program when restarting again, and the whole reset process is completed. You can turn off the power, then unplug it for a few hours, and then power it back on. The washing machine has a computer version, which supplies power to the computer board, and normally has a main power supply.

However, in the case of power loss, there will be capacitors inside the machine to store electrical energy to achieve short-term power supply. So, cut off the power supply, unplug it, wait a few hours (long point insurance), and the power in the capacitor is completely discharged, and the machine will automatically restore to factory settings. It's a very simple method, but it takes a little time, and it's still very convenient.

TG70-1211DXS Little Swan drum washing machine computer version factory reset how to restore.

Hello dear, happy to answer your <>

TG70-1211DXS Little Swan Drum Laundry Dan Dust Thrill Machine Computer Version How to restore factory settings is because the washing machine is an intelligent product, it has a memory function, it is recommended to press the pause button directly when running, wait until the washing machine stops working and then press and hold the power button, turn off the washing machine, and you can choose a new program when the mold socks are restarted again, and the whole reset process is completed. You can turn off the power, then unplug it for a few hours, and then power it back on. The washing machine has a computer version, which supplies power to the computer board, and normally has a main power supply.

However, in the case of power loss, the machine will make a capacitor to store electrical energy to achieve short-term power supply. So, cut off the power supply, unplug it, wait a few hours (long point insurance), and the power in the capacitor is completely discharged, and the machine will automatically restore to factory settings. It's a very simple method, but it takes a little time, and it's still very convenient.

I did it with the scriptures but still not recovered: what is the problem: thank you.

You can turn off the power, then unplug it for a few hours, and then power it back on. The washing machine has a computer version, which supplies power to the computer board, and normally has a main power supply. However, in the case of power loss, there will be capacitors that store electrical energy inside the machine chain to achieve short-term power supply.

Therefore, cut off the power supply, unplug it, wait for a few hours (Changyin Cong point insurance), and the power in the capacitor is completely discharged, and the machine will automatically restore to factory settings. This is a very simple method, but it takes a little time, and it is still very convenient.

There is a water level key or water volume key on the adjustment panel of the washing machine, which can be adjusted according to the amount of clothes.

XQB75-118 Little Swan Washing Machine Instruction Manual.

XQB75-118 Little Swan Washing Machine Instruction Manual Hello dear, 1. The use of Little Swan washing machine should first be connected to the power supply, ensure that the power supply line at home is installed and grounded, so as to avoid serious electric shock accidents, and install the automatic faucet [Faucet is the popular name of the water valve, which is used to control the size of the water flow switch, which has the effect of saving water. ] to ensure that the ground is stable. 2. Then you need to start the power button of the Little Swan washing machine so that the washing machine can accept the control.

Then according to the amount of laundry you need to wash, set up the washing limb resistance dehydration, if it is to wash clothes, then choose the amount of water, and start working. 3. The use of Little Swan washing machine is based on the actual needs of the water consumption [water consumption refers to the amount of water used by water users, usually provided by water supply units, or it can be obtained by water users directly from rivers, lakes, reservoirs (ponds) or underground. ] and related procedures, simple laundry only choose to wash it, only dehydration can choose dehydration.

Select the start button, which is similar to the device [usually refers to the software that can store the device or audio file in the form of a digital signal, and also refers to the electronic device product with the function of the device or audio file. ] key. The little swan washing machine is ready to go.

4. After the selected program is finished, the buzzer of the Little Swan washing machine is an electronic alarm with an integrated structure, powered by DC voltage, and widely used in computers, printers, copiers, alarms, electronic toys, automotive electronic equipment, machines, timers and other electronic products as sound devices. ] will beep, so that the clothes are washed, do you think the little swan washing machine is quite easy to use? 5. After the work of the Little Swan washing machine is finished, turn off the power switch [the power switch is used to control the switch tube through the circuit to carry out high-speed communication and cut-off The direct current is converted into high-frequency alternating current and provided to the transformer for voltage transformation, so as to generate one or more sets of voltage .. required

and power plug [power plug refers to a device that connects electrical appliances and other devices to the power supply.] Unplug from the socket, close the faucet, then open the cover, take out the laundry, and put the wire scrap filter [filtermesh (filtermesh) for short, which is made of metal wire mesh of different meshes, and its function is to filter the molten material flow and increase the material flow resistance, so as to filter out mechanical impurities and improve the effect of mixing or plasticizing. Clean the bag, open it and dry the washing machine.

Hope it helps. If my answer is helpful to you, please give a thumbs up (in the lower left corner), I look forward to your like, your efforts are very important to me, and your support is also the motivation for my progress. Finally, I wish you good health and a good mood!

How to clear the fault of the Little Swan washing machine XQG70-1218CR**.

Hello, Little Swan Washing Machine XQG70-1218CR to clear the fault** method is 1, E1: E1 means that the water inlet or water replenishment timeout, in this case, just open and close the door cover to see if there is a problem with the water inlet valve. 2、e2：

E2 means that the water level sensor still cannot be reset after 6 minutes of drainage, in this case, open and close the door cover, and check whether the position of the drain pipe is abnormal. 3. E3: E3 means that the front door of dehydration is not closed, and Naiyun only needs to close the door cover.

4. E4: E4 means that in the same process, the third barrel collision occurs. In this case, simply close the lid and distribute the laundry evenly in the bucket.

5. E5: E5 means bottom voltage protection, in this case, as long as the grid voltage rises, the washing machine will automatically resume operation. 6、e6：

e6 means that the appointment time is not enough, just press the appointment button to increase the appointment time. 7. E7: E7 means that the state of the non-empty barrel is not the state of the weighing correction, in this case, as long as the empty barrel state is restored.

8. E8: E8 means that the water level sensor is damaged or the person who laughs is in poor contact. In this case, just check whether the water level sensor and the circuit are connected.

9, E9: E9 means automatic weighing failure, this situation as long as the signal transmission line system can be checked, if the signal transmission line system is not abnormal, it is necessary to replace the new computer board. 10、e10：

e10 means that there is no time set, in this case, you can set the time first and then set the appointment time. Dear, the above is my summary of your problem, do you see if there is anything else you need me to help you with.