What is the inner and outer diameter of 6O2o2 bearing?

Friend, you want to ask about 6002 bearings, right?

Hello, according to your question, "what is the bearing model of the inner meridian 95 outer diameter 2oo" will be answered by me, the bearing model of the inner meridian 95 outer diameter 2oo is, the size is 95 200 45 bearing (bearing) is an important component in contemporary mechanical equipment. Its main function is to support the mechanical rotating body, reduce the friction coefficient during its movement, and ensure its rotation accuracy. In the early form of linear motion bearings, a row of wooden poles was placed under a row of skid plates.

Modern linear motion bearings use the same operating principle, except that balls are sometimes used instead of rollers. The simplest rotary bearing is a sleeve bearing, which is simply a bushing sandwiched between the wheel and the axle. This design was then replaced by rolling bearings, which replaced the original bushings with many cylindrical rollers, each of which acted like a separate wheel.

20 How much is the outer diameter of the bearing.

Dear, after the system inquiry: 20 bearing outer diameter is: inner diameter 20, outer diameter 72, 62, 52, 47, 42, 40, 37, 36, 35, 32 deep groove ball bearing inner diameter 20 outer diameter is uncertain, different models, different series of deep groove ball bearing inner and outer diameter is different.

Examples are as follows: Bearing Type: Deep Groove Ball Bearing New Model:

61804 Old Model: 1000804 Inner Diameter (mm): 20 Outer Diameter (mm):

32 width (mm). Bearing Type: Deep Groove Ball Bearing New Model:

61904 Old Model: 1000904 Inner Diameter (mm): 20 Outer Diameter (mm):

37 Width (mm): Bearing Type: Deep Groove Ball Bearing New Model:

16004 Old Model: 7000104 Inner Diameter (mm): 20 Outer Diameter (mm):

The bearing bore diameter of 6027 is 7mm

International new code: S727J Domestic old code: 6027 Inner diameter: 7mm Outer diameter: 22mm Width: 7mm

1.Follow the new model:Deep groove ball bearings. There are 6026 6028, but I haven't seen 6027. According to the conventional calculation method of the bearing bore code:

04, ID code 5. That is, the inner diameter: 27 5 = 135mm.

2.Follow the old model:6027 corresponds to S727J, angular contact ball bearing. Inner diameter: 7mm.

According to the data you provided, the model of the deep groove ball bearing is 6000

There are many bearings with an outer diameter of centimeters and an inner diameter of 1 centimeter, for example, as follows:

Bearing type: deep groove ball bearing.

New model: 6100

Old domestic model: -

Inner diameter (mm): 10

Outer diameter (mm): 26

Width (mm): 8

Bearing type: deep groove ball bearing.

New model: 6000

Domestic old model: 100

Inner diameter (mm): 10

Outer diameter (mm): 26

Width (mm): 8

Bearing type: angular contact ball bearing.

New model: 7000c

Old domestic model: 36100

Inner diameter (mm): 10

Outer diameter (mm): 26

Width (mm): 8

Bearing type: thrust ball bearing.

New model: 51200

Domestic old model: 8200

Inner diameter (mm): 10

Outer diameter (mm): 26

Bearing type: thrust ball bearing.

New model: 53200

Old domestic model: 28200

Inner diameter (mm): 10

Outer diameter (mm): 26

Width (mm):

The bearing of the inner meridian 24 is non-standard, and there is no standard type of non-standard bearing. Customized is required.

The calculation of the bore diameter of a standard bearing is as follows:

1.The inner diameter within 10mm is expressed as 62 9 The inner diameter of the bearing is 9mm behind the slash bar

2.The inner diameter is between 10mm and 20mm (excluding 20mm), and the basic code is 00, 01, 02, 03, which represents the inner diameter of 10mm, 12mm, 15mm, 17mm, such as 6201, and the last two digits are 01, which means that the inner diameter is 12mm

3.The inner diameter between 20mm and 490mm is multiplied by 5 by the last two digits of the bearing code, for example, the two digits after 6020 are 20 multiplied by 5, and the inner diameter size is 100mm

4.The inner diameter greater than 490mm is also represented by a slash 62 1000 and the inner diameter size is 1000mm

A total of 7 kinds of bearing models with inner meridian 25 and outer meridian 60 were found, as shown in the following chart: