The method of fastening the button, the weaving method of the cloth button

Dressing is something that children do every day, and buttoning them is even more commonplace. Wearing clothes is inevitable to learn to tie buttons, and 2-year-old babies can learn to tie buttons. There are few things that make your child feel like a big kid like choosing and dressing yourself.

Learning to tie buttons will be a big step forward for him. From the point of view of motor development, most children can learn to fasten buttons by the age of three or four. And unbuttoning, most likely you have already observed, much earlier than that.

Moreover, practicing unbuttoning and buttoning on the one hand can allow the baby to learn to dress himself as soon as possible, and at the same time, it also practices the baby's hand-eye coordination, so that the skills of the hand can be improved, which is a good way to exercise the flexibility of the hand. At the same time, the baby learns to fasten the buttons by himself, which is also very fulfilling! So, don't underestimate the activity of buttoning!

PS: The specific steps to fasten the button:

1. Align the placket - grab the two corners of the bottom of the placket of the garment with both hands, align them, and always keep the bottom edge aligned afterwards;

2. Find the bottom button - find the bottom button of the clothes with the left hand, and find the bottom buttonhole of the clothes with the right hand;

3. Grasp the button - let the child put the thumb of his left hand on the back of the button, put the tip of his index finger on the front of the button, grab the edge of the clothes close to the buttonhole with his right hand, and gently pull it up to promote the buttonhole to open slightly, so that the button can be easily stuffed in;

4. Thread the button in;

5. All the way up, buckle all the buttons - repeat the previous steps, from bottom to top. As long as the lower button is buckled, the upper button can also be buckled in the correct position.

Two to three years old is a critical period for developing children's independence and autonomy, and things like buttoning should be included in their responsibilities in a timely manner. However, it is important to follow the principle of teaching by example and to describe the language while demonstrating it yourself. In fact, as long as parents teach with their hearts, their children will definitely learn with their hearts.

When children really learn this new skill, they will definitely feel a sense of accomplishment and will be more willing to try other new projects.

Hold the button and the buttonhole in both hands, put part of the button into the buttonhole first, and push the rest of the buttonhole into the buttonhole with the hand holding the button.

How do I fasten the button? The so-called knot buckle is to firmly fix the two ends of a rope, there are many ways to fasten the rope, here is a brief introduction to the commonly used buckle method, for the reference of wild survival experts, and at the same time to practice more, the following are a few simple knot methods: don't talk nonsense, please look down.

Tool raw material rope.

A single barset reads step by step.

This single bartack can be used for many purposes in its own right, and it is especially popular with wilderness explorers in the wilderness. First of all, you have to determine the length of this knot, which can be three times the length of the rope loop. Second, make the end of the rope go up through the entire loop of rope.

Finally, rotate around the fixed end and then thread the entire loop downward. Three bartasses.

This single bartack can be applied to double-strand ropes. First, you can make a rope loop. Next, thread the movable end of the double-strand rope into the loop, bypass the fixed end, and then thread it backwards.

They can be used for a variety of purposes, such as a single seat, a chest harness or a shoulder harness.

Rope bend single bartack.

This knotting method can be applied to some special purposes, such as transporting the wounded down the mountain. This is because it has some distinctive features, such as the fact that the loop is not tied too tightly, which will allow the casualty to put his legs into it. In addition to this, the tightening of this knot is located right in the middle of the rope, i.e. the knot is tied with a double-strand rope at the initial stage.

The first two knotting steps are the same as in a normal loop formation. In other words, you can first form a loop, extend the movable end into it, then go down through the loop, rotate it around the fixed end for half a circle, then re-run it upwards through the entire loop, and then pull it tight. Flat knots.

Tie the two ends of the same rope together. It is suitable for connecting ropes of the same thickness and the same material, but it is not suitable for thicker surfaces.

Smooth ropes. Features.

If the winding method is wrong, the result may become an incomplete slipknot, and the knot will fall apart when you pull it hard.

If you pull the knot too tightly, it's not easy to untie, but if you hold the end of the rope with both hands and pull it both sides, you can easily untie it. Secret.

Left on right, right on left. Double bartack.

Other knots are used for the beginning and end of the knot. Use.

Road. It is usually applied to articles with equal force at both ends, and is suitable for horizontal tension.

Features. It is extremely safe, but if force is applied only at one end of the rope, the knots of the double bartain may fall apart or loosen. Fisherman's Knot.

The knot is very easy to tie but difficult to break. Therefore, it should be avoided as much as possible to use on some ropes with good texture, and it is not easy to use, because it will be very tight.

The rope is difficult to untie because it is tightened. Use.

Connecting two rope ropes together is usually two ropes, hard and soft.

Precautions. Just practice it repeatedly.

Here's how to button a cardigan:1. Cross-buckle method.

The penultimate button is crossed with the third button, and the corners of the clothes are tucked into the pants to increase the sense of design of the clothes and improve the waistline.

2. Asymmetrical buckle method.

The penultimate two buttons are not buttoned, one side is sorted out and tucked into the pants, and the other side naturally sags, visually elongating the legs and increasing the height.

3. Dislocation deduction method.

The first two buttons and the back two buttons are interlocked, which is a more hot girl's outfit.

The weaving of the cloth buckle is as follows:

Ingredients: Chinese knot 1 (a Chinese knot of about 40 cm) 1, take a line of about 40cm (used in the figure for Chinese knot), and then fold it in half to make a mark in the middle to facilitate the button not to go out of shape when the final thread is closed. Hold the middle part of the line horizontally with both hands.

<>3. Then pull the thread that was just wrapped around your index finger from behind. Then go through the thread that wraps around the base of your index finger.

4. Pinch the wire with your thumb and flip your hand over. Then place the two sensitive orange lines below in a clockwise direction.

around the marked line and through the hole in the middle (indicated by the yellow arrow). Note: Always keep the mark above in the middle.

The knotting method of Chinese buckles is as follows:

1. Wrap and knot the thread to form a round pimple, and sew a ring with enough buckle to fasten on the other side, which can be combined to form a disc buckle. The cloth pimple buckle is a disc buckle, which is the most commonly used button style in ancient costumes.

2. Use a rope that matches the color of the clothes, about 1 foot in length, put it on the four fingers of the left hand from the middle, and then pinch the right line segment with the right hand and twist it, and put it under the thumb of the left hand and hold it.

3. Then, pinch the other end with your right hand, from the bottom, to the middle of the palm under the line, wear the back end, pull with the right hand, don't pull too tight.

4. Then, remove the above coiled thread from the left hand, then clamp it with the index finger and middle finger, and pick up one end of the rope with the right hand and insert it into the position of the thumb. Then, hold the other end with your left hand, pull the other end with your right hand and insert the wire with your right hand, and slowly pull it up with both hands to form.

5. If you pull the two ends together in your right hand, pinch the highest part with your left hand, and slowly pull up your hands to become a buttonhole. When the rope is braided and slowly pulled with both hands, it is necessary to use strength evenly to see which position is not even enough, and it can be properly loosened and adjusted. When pulling the buttonhole, the left hand should not be too strong, and at the same time, pay attention to the size of the buttonhole, and then pull it firmly.

6. There are many styles of buckles, such as pipa knots, after doing the same as a pipa, when making a 40 cm red rope, leave about 10 cm at one end of the place to fold in half, divided into two ropes on the left and right, the right rope counterclockwise from the top of the red rope to the back, at this time the following also formed a circle, the rope in the circle below the rope and then do counterclockwise, around the back, always pinch the center point of the middle winding, after turning five times the rope tightened, you can get a pipa buckle.

7. In addition to the cheongsam, the buckle is also widely used in Tang costumes and other clothing with a retro style, the types and names of the buckle are very rich, in addition to the common word buckle, there are imitations of animals and plants and flowers, and even there are buckles that make portraits.

First, material preparation: rope.

Second, the operation steps are done by Yuga:

1. Fold the rope in half, stand up the top one, and tighten it slightly. Rotate one of them clockwise and insert it into the gap.

2. Rotate the other one clockwise and insert it into the gap as before, tightening it slightly. Straighten out the thread and slowly tighten the ends to complete the button knot.

Three, button knots:

It is a traditional Chinese hand-woven handicraft with a long history, which belongs to one of the Chinese knots. The scientific name is the pimple buckle, and the older generation is called the rotary cloth button. The knot shape of the button knot is like a diamond, so it is also called the diamond knot, in addition to being used as a button, it is also a very beautiful decorative knot Shen Heng.

If you match it with other decorative knots, you can match blindly. It can also form a pair of beautiful buckles.

Method: First of all, the rope should be about 50 cm long. Start by wrapping one end around your index finger. Note that the right side is on top and the left side is on the bottom. Then wrap one end around your thumb. The upper and lower parts of the rope are opposite to the index finger.

Remove the cord loop from your thumb and place it on your index finger. Take the rope on your index finger and pass it through the rope in the middle of the churn.

We remove all the rope loops from our index finger and thumb, hold them with us, and then lay the rope flat to form a small flower basket with a rope on each side.

Wrap the rope on both sides around the handle of the basket and thread it through the hole in the middle and downward. Tighten the rope, and a rudimentary form of a buckle is formed.

When tidying up, be sure to pay attention to the rope at the top, don't pull it off, you can use a toothpick or a rope to thread it and buckle it.

Then tighten the knot Pay attention to the direction of the rope hold, you can use tweezers to assist, until the adjustment is completed to the perfect knot, and then we draw the toothpick on it. Such a beautiful Chinese buckle is done.

The button knot symbolizes auspiciousness and festivity, and also indicates that couples will tie the knot forever, and it is a common gift trinkets between boyfriends and girlfriends, and it is relatively simple to weave. Take, for example, single-wire button-knots and multi-wire button-ties.

Step 1: Sandwich two threads between your fingers and tie a single knot.

In the second step, the red line turns clockwise and bypasses under the ring line, and the yellow line turns clockwise to bypass under the red line.

Step 3, the yellow line is threaded into the red line circle from below, and the red line is pressed 1 out and 2 out.

Step 4: Pick two red lines from the yellow line and form a square hole in the center.

Step 5, the yellow line turns clockwise to the lower red line and passes through the middle hole; The red thread is turned clockwise over the lower yellow line and threaded through the middle hole.

Step six, remove the knot and pull the lines at both ends; Shaped, done.

1. Intersect the end of the rope with the rope and pass through the rope loop; Tie it into a knot; Pull it tight, and it's done.

2. Double single knot. The double single knot is said to be a knot that makes a circle, but it is better to say that it is an important magic weapon to avoid using the damaged part of the rope. Its knotting method is very simple, just fold the rope in half and tie a single knot.

In this case, if the loop part is the damaged part of the rope, it is not possible to exert force, so you can still use the rope with peace of mind.

3. The button knot is the knot body extended from the double money knot, which is shaped like a button and is not easy to loosen. It is very commonly used and has high practicality. It is most commonly used to fasten clothing, so it is called a button knot, and it is also often used as the beginning or end of a large knot. It is also one of the components of the buckle.