-
Geely Binyue maintenance lamp elimination method: the instrument enters the main page, after activating the steering wheel multiplexing (short press the left TRIP button of the combination switch to activate the steering wheel button reuse), short press the left and right buttons to cycle between the display clock and date setting interface, restore the factory setting interface, reset the maintenance mileage, and overspeed alarm settings. Enter the reset maintenance mileage, and it can be cleared.
-
Geely Binyue maintenance reminder light needs to enter the maintenance interface to turn off.
2. Continue to press the down button on the steering wheel and find the maintenance selection.
3. Then select and press the OK button.
6. The last maintenance reminder is canceled.
-
1. Rotate the ignition switch to the position of no to make the engine in a standstill state;
2. Press the button in the middle of the wiper until the screen of 0km is displayed on the dashboard;
3. Press and hold the button on the dashboard, the words 6000km will be displayed on the dashboard, and the maintenance light will be eliminated.
The function of the maintenance light is to record the mileage of some important accessories, just like a timer in a sprint race, and play a role in reminding car owners and car maintenance personnel. If the car is maintained, but it is not zeroed, although it will not affect the performance of the vehicle, it will bring trouble to the next replacement of auto parts, that is, it is not possible to know exactly when the new parts will be used.
The question was 21 models.
It is 21 models. Is it the same, is it the same?
Second, after activating the steering wheel multiplexing (short press the left TRIP button of the combination switch to activate the steering wheel button multiplexing) Third, by short pressing the left and right buttons to cycle between the display clock and date setting interface, restore the factory setting interface, reset the maintenance mileage, overspeed alarm settings.
Enter the reset maintenance mileage, and it can be cleared.
The setting in your instrument is which button on the steering wheel, just press which one to enter the settings is this, and the menu button asks what it is.
If you don't understand, just take a picture and send it to me.
Did you find it, remember to like it for me, thank you [Bixin].
The question could not be found.
Is there a button on the wiper that can be pressed?
I'm asking [left covering face].
Sixth, press the up and down buttons on the right side of the steering wheel, press directly in the middle, do not press up and down, and you will successfully return to zero when you press directly, do not press up and down.
-
1. The ignition switch is kept in the ON state, and the engine is stopped, 2. Press the button in the middle of the wiper switch until the word "0" km appears on the instrument display, 3. Press and hold the button on the instrument panel for about 5 seconds until the word "6000" km is displayed on the instrument, and release the button to complete the maintenance light reset.
-
Geely Binyue maintenance reminder light needs to enter the maintenance interface to turn off.
1. Steering wheel.
2. Continue to press the lower button on the steering wheel with the trace, and find the maintenance selection.
3. Then select the state and press the OK button.
6. The last maintenance reminder is canceled.
-
1. Press the start button to start the Geely Boyue car.
<>3. Then press the SET button on the steering wheel of Geely Boyue car.
4. Take a look at the display screen of Geely Boyue Automobile, and there will be maintenance information.
5. Next, press the close button button button on the steering wheel of Geely Boyue car.
6. Finally, the maintenance lights of Geely Boyue cars were eliminated.
-
Hello! There is a computer that specializes in maintaining the light, and you can use the computer to remove it.
If you don't use a computer to clean it, here's how:
1: Press the top of the turn signal to show that the instrument button has been activated;
2: Select up and down again with the dial of -volume.
3: Go to the column of setting the subtotal mileage, and then press the mode button to enter the submenu;
5: Press mode to enter;
6: Then use the volume keys to move to the zero option;
-
If the vehicle is plugged in when it is not ignited, use the travel button on the steering wheel to activate the steering wheel reset button. The setting method is to cycle through the left and right buttons until the factory reset interface, maintenance mileage interface, and overspeed alarm interface appear. Select Zhixian to enter the maintenance mileage, and take the operation to ensure that the maintenance light is extinguished after clearing.
How often is Geely Binyue maintained.
The maintenance time of Geely Yuebin is every 6 months or 5000 kilometers. After that, when the vehicle reaches 20,000 km, the vehicle is inspected. When driving up to 60,000 kilometers, the vehicle needs to be heavily maintained.
Some wear parts are badly worn and need to be replaced. After major maintenance, it is still maintained every 5000 kilometers.
How much does Geely Binyue keep quietly.
Geely Yuebin's first maintenance is free, and the ** for each subsequent minor maintenance is between 350-450 yuan. Major maintenance** depends on the specific model. Check the tires of the vehicle during maintenance, and replace them in time if the wear is serious, generally once every 60,000 kilometers.
Millions of car purchase subsidies.
-
1. Turn on the ignition switch of the car, twist the ignition switch to the position of no, and keep the engine in a state of stopping; 2. Press the button in the middle of the wiper until the screen of 0km is displayed on the dashboard; 3. Press and hold the button on the dashboard, about 5 seconds, and the words 6000km will be displayed on the dashboard; 4. Release the button, and the maintenance light can be reset to zero.
Benefits of maintenance.
1. Regular maintenance of the car can improve the performance of the car and prolong the service life of the car.
2. Fuel saving, the relevant car maintenance test plan says that the car can save fuel in the process of driving if the car is properly maintained.
3. Reduce emissions, the same car maintenance test plan says that after the maintenance of the whole vehicle, when the car is idling, the CO emission is reduced. Conventional maintenance is divided into three aspects: car body maintenance, car interior maintenance, and car body refurbishment. Among them, the maintenance of the car body is mainly to remove all kinds of oxides inside and outside the car body to prevent the car body from being corroded; The maintenance in the car is mainly the repair of fuel, lubrication and other operating systems to ensure the driving of the car; The refurbishment of the car body is mainly to repair scratches, engines, bumpers, leather and other materials.
-
Put the ignition switch of the vehicle in the ON state, find the control wiper switch on the right side of the steering wheel, press the button in the middle of the wiper, observe whether the screen appears 0km, and then press and hold the button on the dashboard for five to seven seconds, and wait until the dashboard shows 6000km, and the maintenance light is completed to zero.
Put the ignition switch of the vehicle in the ON state, find the control wiper switch on the right side of the steering wheel and call the bumper Qing, press the button in the middle of the wiper, observe whether the screen appears 0km, and then press and hold the button on the dashboard for five to seven seconds, and wait until the dashboard appears 6000km, and the maintenance light is completed to zero.
Geely Binyue manufacturer's guide price vehicle **10,000 yuan to 10,000 yuan, this car is a small SUV model, currently with 18 models on sale, including 2020 models, 2019 models. Among them, the 2020 model is matched with a turbocharged engine, a turbocharged Huai engine, and a turbocharged engine is matched with a six-speed manual transmission and a six-speed dual-clutch transmission. The litre engine is mated to a seven-speed dual-clutch gearbox.
Geely Binyuesheng engine is good in terms of quality and quality, because this engine is a product jointly developed by Geely Group and Volvo, with a maximum power of 177 horsepower, a peak torque of 255 Nm, and an acceleration time of only 100 kilometers in seconds.
-
Geely Binyue maintenance lamp zero actual operation process:
1. Turn on the ignition switch of the car, and twist the ignition switch to the part of the no, so that the car engine is in a stop-and-turn situation;
2. Press and hold the button in the middle of the wiper until the interface on the dashboard indicates 0km;
3. Press and hold the button on the dashboard, about 5 seconds, the words 6000km on the dashboard indicate that the maintenance light is zeroed.
The effect of the maintenance light is to record the application kilometers of some key components, just like a timer in a 100-meter race, which has the effect of alerting car buyers and their car maintenance workers. If the car is maintained, but there is zero, although it will not directly affect the characteristics of the car, but it will cause inconvenience to the next shirt to replace the auto parts, that is, it is not possible to accurately understand the new parts used.
The basic maintenance interval time of the car.
The maintenance light flashes, which means that the car must be maintained, the car generally travels 5000 kilometers or half a year must be maintained, some car buyers do not often drive, and even a year can not run 5000 kilometers, but the car oil, refrigerant, booster oil, even if it is very rare, but a long time will still produce a qualitative change or hall, so it is best to do maintenance for more than half a year.
The specific new items of minor maintenance are to replace the oil and oil filter element, so the price will not be very high, around 500-80 yuan; If it is a large maintenance, the maintenance of new items has increased, and the price will definitely be enhanced a lot, around 1000-1500 yuan.
Millions of car purchase subsidies.
It is very suitable and belongs to the compact SUV
The following ways can be used to eliminate the Ralink maintenance lamp. >>>More
Geely Binyue and Auchan X5, which are also boutique SUVs, I think Geely Binyue should be chosen, because this car is more cost-effective, using a blackened honeycomb grille that looks more concise and sporty, and is no longer the family's hollow-shaped front face of the nesting doll face", which looks a lot more personalized. The 2021 Binrui is powered by a 4G14TB engine that produces 141 hp and 235 Nm of torque.
1. First press the start button to start the Suzuki Sky Whisper SX4 vehicle. >>>More
Tire pressure. The fault light is usually caused by the following conditions: 1. The tire is punctured; 2. The tire pressure is too high; 3. The driving time of low tire pressure is too long; 4. The tire pressure that has not been inflated for a long time becomes low. >>>More