What to do if the bubble glue does not bubble How to save the foam gelatin

Maybe there are few things to add, such as only putting a facial cleanser or something, the effect is definitely not ideal, and if you can bubble a little bit, it must be good hahahahaha.

Question 2: The styrofoam I made is very sticky, there is no white glue.

First of all, consider the concentration of borax water, sometimes the borax water outside is the kind of bottle **, the concentration may not be high, which will cause your mud to become more and more watery, and then it will not be formed at all.

It is recommended to go to the hospital or pharmacy to buy that kind of medical borax for the sake of safety, if it is inconvenient to choose**, I can send you a private message link, I can do my own research at home, the Internet says 50 100:1, but I myself come by feeling hahahahahaha.

The second point is whether glycerin is added too much. Glycerin is used to stretch and is added before making, and if you add too much, it will cause excessive stretching, and the temperature of your hands will cause you to stick to your hands.

The third point is to add too much water, foaming glue is actually more accustomed to adding some water in my personal production, because I generally add white glue when making it, and the concentration is very high. So I'll add more water. Then our shampoo, facial cleanser and shower gel are relatively expensive, and the price is not down, I don't feel like there is no foam without adding water, hahahaha, such as facial cleanser, adding a little water will make a lot of bubbles So I like to add water, but I generally add 300ml and 3-8ml of water In summary, it's a loss.

Therefore, it is recommended that you add a little water when you do it, and there will be a little more bubbles when you throw it away, of course, in a ratio, 100:2

The bottom line: don't add too much water.

Q3: The styrofoam I made is brittle?

Undoubtedly, the concentration of borax water is too high! You can add glue to save it, but then it depends on whether you are reluctant to add glycerin if it is too hard, and then put it for a few more days, it will become soft It is a matter of time

1. Add molding water to the melted styrofoam and stir vigorously, and then add makeup remover water and stir to restore.

2. Add a piece of hard styrofoam to the melted styrofoam, and then rub vigorously to mix the two, and then you can see the styrofoam return to its original appearance.

3. Add a piece of clay to the melted styrofoam and mix, then stir well, and you can return to its original appearance.

Production method: 1. Prepare glue, glycerin, shaving foam or facial cleanser foam, borax water.

2. First put glue and glycerin in the container, then add shaving foam or facial cleanser foam and stir, add some water when stirring, the amount of water is half of the glue;

3. Finally, add borax water, it should be noted here that borax water should be added in small quantities and many times when stirring, and it is taboo to add too much water when making styrofoam, which will make the styrofoam too thin, so that the styrofoam will not be able to pull the wire.

1. Add a good piece of styrofoam to the melted styrofoam, knead it back and forth like kneading dough, knead it vigorously and then add a piece of clay and then knead it back and forth like kneading dough, and then pull it back and forth like rolling dough, and the foaming gum that melted off is resurrected like this.

2. Glue, made in a regular body"glue", the word from the meat from the feather. "Meat"Meaning:"Juicy"，"Ao"Meaning:"Merge"、"combined"。"Meat"with"Ao"United"Meat-like binder"。

Original meaning: adhesive. In terms of geography, it now mostly refers to the surrounding areas centered on Jiaozhou City, Shandong Province, such as Jiaodong and Jiaonan.

What to do if the foaming gelatinization is pro! Hello, I'm glad to answer for you<> as long as you mix water, baking soda, laundry detergent, hand sanitizer, soapy water, and dish soap together, sprinkle evenly on the styrofoam, stir vigorously, and it will not stick. (Hint:.)

Don't put too much baking soda) 1. You can add some molding liquid or borax water appropriately. This method can effectively solve the problem of styrogelization. 2. First of all, prepare a cup or a small bowl, add some dish soap to it, and then add some hand wash silver.

Stir until completely soluble. Next, add guar gum and borax water and stir until foamy. Next, add warm water and stir until completely soluble.

Then stir again until foamy, then the homemade styrofoam is done. Hope mine can help you <>

Do you have any other questions?

What to add to the styrofoam is not formed The styrofoam is not formed in the process of your manufacturing, the details are not in place, if you want to change this school of filial piety, we can add an appropriate amount of white glue to the too thin styrofoam, and after fully rubbing, you can make the styrofoam thicker and molded. After the styrofoam is placed for a long time, it will melt away, you can add a few drops of molding water to the styrofoam, and repeatedly rub the styrofoam to restore the original viscosity. It is also possible to add molded styrofoam to the melted styrofoam, and after fully blending, the melted styrofoam can also be restored.

How to make styrofoam too thin If you want to make styrofoam mold, we can add care liquid, baking soda, dish soap, laundry detergent, laundry detergent and other items that are easy to bubble carefully, but you must add it slowly when you are doing it to make it even, and do not add too much at once.

Styrofoam does not foam, you can add some more materials to it that can help foam, such as facial cleanser, bubble hand sanitizer, etc. If the styrofoam is too thin to form and blister because of too much water, you can add an appropriate amount of borax water to it, which can play a good role in shaping and making auspicious filial piety.

How to solve the problem of styrofoam foaming.

Styrofoam is a very fun decompression toy, it is sold on the market, and it is relatively simple to make, so many people will make some styrofoam at home to play. However, due to some operation errors in this process, the styrofoam cannot be foamed.

In this case, you can add some materials that can help foam to the styrofoam, such as facial cleanser, bubble hand soap, shower gel, shampoo and the like, which are more common in life and are more convenient to use.

In addition to the reason for the addition of less foaming material, the foaming glue does not foam may also be because the water in the foaming glue is too much, which will cause the styrofoam to be too thin to foam normally.

1. If the styrofoam is not foamed, you can add more materials to it that can help Huaimu foam, such as facial cleanser, bubble hand washing lead, etc.

2. In addition to the reason for the addition of less foaming material, it may also be because the water in the styrofoam is too thin, resulting in the styrofoam being too thin to foam.

If the styrofoam is too brittle to foam, you can try adding some glycerin to it, and after kneading it well by hand, the styrofoam will soften and will not change color. In addition, you can also add some toothpaste to the foaming gum, and after rubbing the toothpaste and styrofoam evenly, the effect of styrofoam will be better, and there will be no staining.

When the styrofoam is too brittle to foam, you can add an appropriate amount of glycerin to it, and after kneading it well by hand, the glycerin can soften the styrofoam, and the styrofoam will not change color because of this.

In addition, you can also add an appropriate amount of toothpaste to the styrofoam, and after kneading the toothpaste and styrofoam evenly, the effect of styrofoam can also be better, and there will be no staining.

The reason why styrofoam does not foam is mainly because there is less foaming material, so you can add facial cleanser, bubble hand sanitizer and other materials that can help bubbles.