Audi A6L2 4 problems during break in

Under normal circumstances, the run-in period of 1500 kilometers is enough, and Audi does not need to run in theory for German cars, but after all, the new car is still gentle, which is more conducive to the future work of the engine. After 1000 kilometers, you can run down the high speed if you have the conditions, the speed is controlled within 110, and the engine speed should not be higher than 3000 rpm. After the 1500 run-in period is over, you can switch to manual gear at high speed, let each gear run to about 3500 rpm for a while, of course, it doesn't matter if you don't do this step.

The engine can be changed for the first time, and it is not necessary to change it in advance.

Upstairs, are you kidding 1500 km.

The car has a cold run-in before leaving the factory, but the run-in in the later stage is still necessary Generally, the speed should not exceed 3000 rpm within 5000 kilometers The speed does not exceed 100 Taboo rapid acceleration and sudden braking After the first insurance, in fact, the run-in is not over But it should be properly used S gear to run at high speed Pull a high speed Just to accelerate smoothly After the second maintenance That is, 10000 kilometers The car is in the best condition At that time, you can run casually The first warranty to change the engine oil The second time is not used As for the hand block run-in mentioned upstairs It is meaningless at all Anyone who knows a little about cars knows that the manual automatic car D gear and manual mode are the same thing.

Audi stipulates that the best run-in time should be 2w kilometers, during which the manufacturer stipulates that the maximum speed should not exceed three-quarters of the maximum speed, and the 4S shop provides the first maintenance of the oil filter (about 5000km) and 1500km free testing.

Audi A6L run-in period of running-in: 1. Avoid emergency braking, emergency braking not only makes the braking system in the run-in impact, but also increases the impact load of the chassis and engine, it is recommended not to brake urgently within 300 kilometers of the initial drive; 2. Avoid overloading, as the new car will cause damage to the parts if it runs at full load during the run-in period; 3. Do not drive at high speed, there is a speed limit during the run-in period of the new car, when the throttle is fully open, the speed can not exceed 80% of the speed limit, and pay attention to the engine tachometer and speedometer during driving, to ensure that the engine speed and speed work at medium speed, and the engine speed during the run-in period should be 2000 to 4000 rpm per minute; 4. Use high-quality gasoline, the gasoline used by the new car during the run-in period should not be lower than the manufacturer's specified number, and high-quality gasoline should be added as much as possible, and anti-wear oleosperm should not be added, so as not to have enough mileage and insufficient running-in.

Audi A6L should pay attention to: first, try to avoid sudden emergency braking; The second is to avoid super-loose volumes as much as possible; Third, try to avoid walking long distances; Fourth, try to avoid high-speed driving; Fifth, try to avoid changing the oil too soon.

First, try to avoid the impact of sudden emergency braking on the braking system during the run-in, and also impact the load of the chassis and engine. Try to avoid sudden emergency braking for the first 300 km. Second, try to avoid overloading.

If the run-in period is fully loaded, it will cause damage to the parts. Therefore, for the first 1000 kilometers of a new car, the recommended load is less than 75%-80% of the rated load. Third, try to avoid walking long distances;

If a new car travels a long distance during the break-in period, it will increase the continuous working time of the engine and greatly increase the chances of wear and tear of parts. Fourth, try to avoid high-speed driving; During the run-in period, the speed limit for new cars is limited.

Domestic cars should maintain a speed of 40-70 kilometers per hour, and imported cars should be controlled within 100 kilometers. If the throttle is wide open, the speed should be less than 80% of the top speed. 5.

Try to avoid changing the oil too soon. The first oil added to the new car is a special lubricating oil during the run-in period. Use oil with low viscosity, good heat dissipation, easy to clean, and strong maintenance ability.

Some people will also add abrasives to help the new car run in. Therefore, the oil during the run-in period only needs to be changed according to the time specified by the manufacturer, and try to avoid premature oil change.

Millions of car purchase subsidies.

Audi A6L run-in period should pay attention to: 1. Try to avoid sudden emergency braking; 2. Try to avoid overload; 3. Try to avoid long distances; 4. Try to avoid high-speed driving; 5. Try to avoid changing the oil too early. 1. Try to avoid sudden emergency braking, and the impact force of sudden braking will affect the braking system in the running-in, and it will also cause shock load to the chassis and engine.

During the first 300 kilometers, try to avoid sudden emergency braking. 2. Try to avoid overload during the run-in period if the load is full, which will cause damage to the parts. Therefore, within the first 1000 kilometers of the new car, it is recommended that the load capacity is less than 75%-80% of the rated load.

3. Try to take as little as possible If the new car takes a long distance during the run-in period, it will increase the continuous working time of the engine, and the probability of wear and tear of the parts will be greatly increased. Fourth, try to avoid high-speed driving during the run-in period of new cars stipulated in the speed limit, domestic cars should maintain a speed of 40-70 kilometers per hour, imported cars should be controlled within 100 kilometers. If the throttle is fully open, the speed should be less than 80% of the top speed.

Fifth, try to avoid changing the oil too early, the first time the oil added to the new car is the lubricating oil specially used during the run-in period, to use low viscosity, good heat dissipation performance, easy to clean, strong health care ability of the oil. Some people will also add abrasives to help the new car run in. Therefore, the oil during the run-in period only needs to be changed according to the time specified by the manufacturer, and try to avoid changing the oil too early.

The 2017 Audi A6L needs to be run-in, and the new car has to be run-in, with a run-in mileage of about 1,500 km. Within 1000 km: the driving speed must not exceed 2 3 of the maximum speed, and the throttle must not be increased to the maximum!

1000 to 1500 km: You can gradually increase the rpm and speed. During the first period of a car's use, the internal friction of the engine is higher than later, because it is a process in which all the moving parts work together until it is smooth.

The way you drive during the first 1500 kilometers also affects the quality of the engine. After that, especially when running cold, drive gently as well, which will reduce engine wear and increase driving range.

The run-in period of the Audi A6 is 5000 km, that is, before the first insurance, which is considered to be the run-in period.

The running-in period generally refers to the process of contact, friction and occlusion of mechanical parts during initial operation. Modern is often used to describe a period of time when two things or organizations become familiar with each other and adapt to each other. It is also used to describe the stage when feelings and marriages begin and become familiar with each other.

Running-in is also called running-in. The running-in period refers to the initial driving stage after the new car or overhaul, which is generally 1000 to 1500 kilometers, which is the basic mileage for the full contact, friction, adaptation and finalization of the parts and components of the Baozu judgment. During this period, the adaptability of the various parts of the car to the environment can be adjusted and improved, and the bulges on the parts can be worn off.

The quality of the car run-in will have an important impact on the life, safety and economy of the car.

Audi A6 Skill:

First: cold cars need to be warmed up.

Second: maintenance should be timely.

The new Audi A6 is in the run-in period and must be maintained in time. We only need to inspect and maintain the vehicle, change the oil, oil filter, etc. After a certain number of kilometers or time, the chassis system is thoroughly inspected according to the manufacturer's recommendations in the vehicle's manual.

Three: Pay more attention to the state of the oil.

During the break-in period of the Audi A6, the engine is in the critical stage of "entering the state", and the tiny metal shavings generated during the operation of its parts and components will be mixed into the oil, which will exacerbate engine wear if the oil is not changed in time.

Fourth: The added fuel should be ***.

A lot of new owners of the Audi A6 are thrifty or mega cars. In order to save money, everyone will go to some private gas stations with low fuel prices to refuel. However, the quality of the oil at these stations is not high, and the damage to the vehicle can be large or small.

Hundreds of shirts and ears rent 10,000 car purchase subsidies.