The best way to boil a new pot nonstick pan

The best way to boil a new pot nonstick pan is as follows:

1. The newly bought non-stick pan will generally be labeled with a merchant label, and we first tear off all the labels stuck to the pot body. If the label is not easy to clear, you can borrow the wind oil essence at home.

Poured on the trademark, the wind oil essence is easy to tear after completely soaking the trademark.

2. Use warm water, scrub the inside and bottom of the pot with a soft sponge cloth, rinse inside and out, drain the water, and wipe dry with a clean rag.

3. Evenly brush the surface of the non-stick pan with a thin layer of cooking oil (lard.

and butter except).

4. Turn off the heat after heating on low heat for about 5 minutes, wait for the non-stick pan to cool naturally, let it stand overnight, and wash it with water before the next use. This not only prolongs the life of the pot, but also brings out the best cooking value.

Precautions

1. Dry burning and empty burning should be avoided, if the coating on the surface of the non-stick pan is heated for too long after air burning, the coating will be damaged and the effectiveness of the non-stick pan will be lost.

2. It is best to use a wooden spatula or silicone spatula, which can better protect the coating of the pot body. Avoid using a shovel that will scratch the surface of the pot, as the shovel can easily cause the non-stick pan coating to peel off and fail, damaging the entire pan body.

3. When cleaning the non-stick pan, choose to clean it with a soft sponge or rag, and do not use hard objects such as iron brushes and steel wool balls, which is conducive to protecting the coating of the pot body and prolonging the service life.

The best way to boil a new pot nonstick pan is as follows:

1.List of ingredients: new pot, fatty meat or meat skin, detergent, kitchen paper, gas stove.

2.Steps:

1) Clean the new pot first, scrub the inside and bottom of the pot with scouring pad and water, and then clean it with water.

2) Wipe the pot with kitchen paper, put it on the stovetop, and dry over low heat.

3) Prepare a few pieces of fatty pork, hold the fatty pork with tongs or chopsticks, and rub it on the edge of the pan while heating over low heat. Be sure to repeat it many times and wipe every corner.

4) Heat slowly to force out the lard, then use a small spatula or spoon to pour oil over the edges of the pan. Repeat this action several times to ensure that the inner wall of the pot is soaked in oil.

5) After standing in the pot for 3-5 hours, it can be used.

The above is the best way to boil a new non-stick pan, I hope it can help you.

The best way to boil a nonstick new pot is as follows:

1. First of all, we need to use dish soap for the newly bought iron pot.

Wash it aside, because when the iron pot leaves the factory, in order to prevent rust in contact with the air before use, it is usually sprayed with a thin layer of wax, so we have to wash it off before use.

2. Then we put the cleaned pot on the stove, turn on high heat to dry, and when the bottom of the pot is a little brown, then turn the iron pot to let the iron pot be evenly heated all around.

3. After being heated, we change the heat to low, and then prepare a piece of raw fatty pork, wipe it on the pot with chopsticks, and wipe it in a spiral shape from the inner circle to the outer circle, and keep wiping on the inner wall of the pot, so that the spilled grease is evenly spread all over the pot surface.

4. With the constant wiping, the spilled lard.

It will get darker, and it will become more and more.

5. We will pour out the lard first.

6. Rinse the pot with hot water.

7. Then put it back on the stove to dry, turn on a low heat and continue to wipe with lard, about 3-4 times repeat this step, and finally we will put the cleaned pot on the stove to dry, and then turn on the low heat with kitchen paper or paper towels to smear it with a thin layer of vegetable oil, vegetable oil is the peanut oil we usually eat, sunflower oil.

rapeseed oil, etc. <>

8. After smearing the vegetable oil, the boiling pot is completed, so that the boiling pot will become brighter and smoother the more you use it.

However, if you want to make a pot work well all the time, you should also pay attention to maintenance at ordinary times, and the maintenance is also very simple, just apply some vegetable oil when you don't use it. Coated non-stick pans, some need to be replaced once a year or two, but if the iron pan is used well, it will be no problem to use it for decades.

In addition, if you feel that the pot that you have used is easy to stick to the pot and rust, you can also use this method to reopen the pot for maintenance.

Tools Raw materialsDish soap, non-stick pan.

1. Add some dish soap with warm water, scrub with a sponge, rinse with water, and then wipe the remaining water with a dry rag or kitchen paper.

2. Coat the surface of the non-stick pan with an even layer of cooking oil (preferably no butter or lard).

3. Put the non-stick pan coated with cooking oil on the fire and bake until the oil temperature starts to smoke, then turn off the heat.

4. After the pot cools naturally, clean it again and use it. This is not only good for the non-stick pan, but also for the best cooking effect of the non-stick pan.

Summary. Hello, here is the best way to help you find out: the best way to boil a new pot in a non-stick pan:

Step 1: Remove the label There will be a label paper in the center of the non-stick pan, which will write the material of the pot and other information, at this time, you can use a hair dryer to blow on the label for a few minutes, and when it is completely soft, it can be easily removed without leaving any traces. Step 2:

Carefully clean the pot Although it is new, it is also contaminated with some bacteria and impurities, it is recommended to drop a few drops of dish soap at this time, and then gently wipe it with a cleaning cloth for a few minutes, be careful not to use steel wool, so as not to damage the material at the bottom of the pot and affect the effect of the non-stick pan. The above information is in**.

Hello, here to help you Zhao Zheng query: the best way to boil a new pot in a non-stick pan: the first digging guess eggplant step:

Remove the label There will be a piece of label paper in the center of the non-stick pan, which will write the material of the pot and other information, at this time, you can use a hair dryer to blow on the label for a few minutes, and when it is completely soft, it can be easily removed without leaving any traces. Step 2: Carefully clean Although the pot is new, it is also contaminated with some bacteria and miscellaneous qualities, it is recommended to drop a few drops of dish soap at this time, and then gently wipe it with a cleaning cloth for a few minutes, be careful not to use steel wool balls, so as not to damage the material at the bottom of the pot and affect the effect of the non-stick pan.

The above information is in**.

Precautions for non-stick pan wheels: 1Avoid dry burning and air burning, so as not to affect the service life. 2.Be careful not to use sharp utensils for stir-frying and brushing the body and coating of non-stick pans.