-
Anonymous users2024-02-12Blue Film: Glue the dust clean to apply the film.
Preparation before the mobile phone film:
Tear off the new phone film or the old film first.
2.Use alcohol or LCD screen cleaner to clean the screen with a cloth.
3.Use an electrostatic precipitator film (blue film) to remove fine dust (not easily visible) from the screen several times by sticking to the screen
Ordinary film (paste):
1. Tear off the No. 1 film, if it is not slightly dirty, use the electrostatic precipitator film (blue film) to remove the dust, 2. The various holes and edges of the ordinary film are aligned with one end and paste them first, scrape them tightly with a hard card, and 3. Compact and stick the film with a cloth to tear off the No. 2 label, and the film is completed.
Tempered glass film (paste):
1. Tear off the No. 1 film (this side is pasted on the screen of the mobile phone), and use the electrostatic precipitator film (blue film) to remove the dust if it is not dirty.
The holes and edges of the tempered glass film are aligned vertically downward, and the center is pressed vertically. Often, pressing the film around the corner will automatically adsorb on the screen until it is completely adsorbed, and finally use a cloth to compact and stick the tempered glass film tightly.
3. All films should be pasted at one time. The film that is pasted in this way is more beautiful, and it can also be torn up and repasted.
-
Anonymous users2024-02-11Blue Film: Glue the dust clean to apply the film.
Preparation. Preparation before the mobile phone film:
1.Tear off the new phone film or the old film first.
2.Use alcohol or LCD screen cleaner to clean the screen with a cloth.
3.Use an electrostatic precipitator film (blue film) to remove fine dust (not easily visible) from the screen several times by sticking to the screen
Ordinary film (paste):
1. Tear off the No. 1 film, and if it is not slightly dirty, use the electrostatic precipitator film (blue film) to remove the dust.
2. The holes and edges of the ordinary film are aligned with one end and pasted first, and scraped and attached tightly with a hard card.
3. Use a cloth to compact and stick the film tightly, tear off the No. 2 label, and the film is completed.
Tempered glass film (paste):
1. Tear off the No. 1 film (this side is pasted on the screen of the mobile phone), and use the electrostatic precipitator film (blue film) to remove the dust if it is not dirty.
The holes and edges of the tempered glass film are aligned and lowered vertically.
2 point press center.
Often, press around the corner and the film will automatically attach to the screen until it is fully absorbed.
Finally, use a cloth to compact and stick the tempered glass film tightly.
3. All films should be pasted at one time.
In this way, the film of the industry is more beautiful.
If it is not pasted.
It can also be torn up and repasted.
The main thing is to remove the dust and not damage the film).
This way you can repost.
-
Anonymous users2024-02-10That's the dust on the screen, and you can stick the dust clean and you can apply the film.
White edge filler is not a corrosive liquid. It is the corner gap between the screensaver and the mobile phone screen that is not tightly glued, find a way to deal with it, and the liquid used to fill it is like the filling gap material used to build a house. Dry. >>>More
Nowadays, smartphones are becoming more and more popular, and the products related to them are becoming more and more abundant, and the screen tempered glass film is one of them. Tempered glass film is now getting cheaper and cheaper, so that many people like to buy it online and do it themselves, and paste it on their beloved mobile phone to prevent the screen from being scratched or accidentally shattered. >>>More
The car film is to be pasted on the inside of the car glass, the reason is very simple, and then there will be no wind and rain on the inside, and the film will not be subject to too much external interference during the use of the film, because the film is glued, without the baptism of wind and rain, it must be very firmly pasted, and it will not be affected on the inside when used. Since the film is attached to the inside of the car glass, the wiper will definitely not scratch the glass film, because the wiper is on the outside, and there is no need to remove the car glass when pasting the car film. Car film is actually a very technical work, much more difficult than architectural film, because the car glass has a curvature, and the architectural glass has a curvature is not much, after a film is cut, it is necessary to bake and shape according to the curvature of the glass, and then accurately cut the film, and then the film is applied internally.
Mobile phones, an electronic product, are the 21st century since the biggest impact on people's lives of a product, easy to cooperate with the Internet to get it, online shopping, processing documents, etc., in ancient times it was really is"Xiucai doesn't go out, he knows the world", and the screen of mobile phones is generally fragile, so everyone generally chooses film,At this time, people will begin to wonder that there are many kinds of mobile phone films, how about nanofilms? In fact, the effect is also good, relatively thin, and the feel is also okay. >>>More
Sticking it on the inside of the car glass, go to the one next to the University for the Aged on Houhu Jinqiao Avenue, it seems to be called Zefeng. I posted it there, a friend introduced the past, I was going to go there to post a Johnson & Johnson, and then the clerk recommended an American global one, it felt good, that Johnson & Johnson and the global test it, or choose the global world. Sent a solar film maintenance, and there is also a tracking service.