How to scientifically repair and maintain construction machinery and equipment

Hello, first of all, the new equipment should pay attention to the run-in period, and secondly, the scientific use of mechanical equipment to reduce the operation of mechanical equipment under conditions such as extreme heat and severe cold, I hope it will help you

Have a professional regularly inspect and repair it, and replace the equipment in a timely manner.

Equipment repair and maintenance refers to the regular inspection, maintenance and repair of equipment to ensure the normal operation of the equipment and extend the service life of the equipment. Equipment repair and maintenance includes the following:1

Regularly check the indicators of the equipment, such as temperature, pressure, current, voltage, etc., to ensure the normal operation of the equipment. 2.Replace the wearing parts of the equipment regularly, such as filter elements, seals, bearings, etc., to prolong the service life of the equipment.

3.Regularly clean all parts of the equipment, such as pipes, valves, pumps, etc., to ensure the hygiene and safety of the equipment. 4.

Regularly carry out the repair and maintenance of the equipment, such as replacing the motor, repairing leaks and other leaks, to ensure the normal operation and safety of the equipment. 5.Establish equipment repair and maintenance records to facilitate tracking and management of equipment repair and maintenance.

Equipment repair and maintenance is very important for the production and operation of enterprises, it can reduce equipment failure and downtime, improve the production efficiency and product quality of equipment, and reduce the production cost and operating risk of enterprises.

The repair and maintenance of equipment is an important measure to ensure the normal operation and prolong the service life of equipment. Here are some common ways to repair and maintain your equipment:

Clean the device: The device needs to be cleaned regularly to keep the surface of the device clean and to remove dust, dirt, and other contaminants. You can use a cotton cloth and detergent to gently wipe down the surface of the device, but avoid using cleaners that contain acids, alkalis, ammonia, or abrasives to avoid damage to the device.

Check the cable: The cable is an important part of connecting the device and the power supply, and it is necessary to regularly check whether it is damaged or aged, and replace the problematic cable to ensure the safety and reliability of the device.

Replacement accessories: The accessories of the equipment such as filter screen, filter element, pulley, etc. need to be replaced regularly to ensure the normal operation of the equipment and the filtration effect.

Lubricate: Add appropriate oil or grease where the equipment needs to be lubricated to reduce friction and wear and extend the life of the equipment.

Timely maintenance: When the equipment fails, it should be repaired in time, and ensure that only after professional and technical personnel repair and replacement can the normal operation of the equipment be restored.

Repair and maintenance can keep the equipment in good working condition, reduce the number of failures, and extend the service life. Therefore, in the daily use of the equipment, it is necessary to maintain and troubleshoot the equipment in time to ensure the normal operation of the equipment.

Summary. The routine maintenance of general equipment can be controlled at about 2 times a year, and special circumstances or special equipment should be maintained and maintained according to the specific actual situation: 1. The equipment working in the inevitable harsh environment should be appropriately increased according to the actual situation without affecting the test; 2. The number of maintenance times should be appropriately increased for equipment with high frequency of use; 3. The equipment for periodic replacement of consumables should flexibly grasp the cycle according to the specific replacement cycle; 4. It is recommended to arrange a maintenance before the inspection of the equipment period.

Hello, what kind of equipment is it? If it is a Yuanfeng instrument, 1, check the appearance and the operation of various functional parts 2, clean, clean 3, fill the lubricating oil field cavity, anti-rust oil, etc. 4, replace consumables and accessories.

Equipment maintenance is aimed at all the instruments and equipment in the laboratory, first according to the working principle of the equipment and equipment to roll paulownia and the frequency of use to determine the frequency of the cycle, and secondly, according to the equipment in the harsh environment or not to relax or shorten the maintenance cycle, and then it is necessary to cooperate with the equipment during the inspection, generally speaking, equipment maintenance should be arranged before each equipment during the inspection, to ensure that the equipment is in the best state during the inspection.

The routine maintenance of general equipment can be controlled at about 2 times a year, and special circumstances or special equipment should be carried out according to the specific actual situation of the mobile fiber protection and maintenance: 1. The equipment working in the inevitable harsh environment should be appropriately increased according to the actual situation without affecting the test; 2. The number of maintenance times should be appropriately increased for equipment with high frequency of use; 3. The equipment for periodic replacement of consumables should flexibly grasp the cycle according to the specific replacement cycle; 4. It is recommended to arrange a maintenance before the inspection of the equipment period. State Qing Fang.

What kind of equipment can you say.

To do a good job in equipment maintenance and maintenance, you should follow the following operations: clean, safe, neat, lubricated, and anti-corrosion. Cleaning means that all kinds of equipment are to be cleaned.

In particular, the interior and exterior of the guest room equipment should be clean, so that there is no ash, no dust, no pests, and a good working environment is maintained. Safety means that all kinds of protective devices should be complete, and all kinds of safety protection devices should be checked regularly; No water leakage, no oil leakage, no air leakage, no electricity leakage, ensure safety, no accidents. Neatness means that all kinds of tools, workpieces and accessories should be placed neatly, lines and pipelines should be complete, and various signs should be obvious and beautiful.

Lubrication means that some equipment is mainly background equipment, which must be refueled at a timed, fixed point and quantitatively. Ensure that the lubrication surface of the disturbance answer book is activated and lubricated to ensure smooth operation. Anti-corrosion means that the equipment should not only be anti-corrosion, especially the front-end equipment also has the problem of keeping it new.

The service life of construction machinery is long and short, and the management and use of users are very important links.

1.Adhere to the implementation of the "two fixed and three guarantees" system.

Set people, set the machine, package use, package storage, package maintenance), mechanical operators to do "three understanding" (understand the structure, understand the principle, understand the performance), "four will" (will use, will maintain, will check, will eliminate general faults). Correct use of machinery, strict implementation of safety technical operating procedures, the implementation of target cost management of machinery and equipment, the operator's economic benefits and machinery use costs (such as fuel costs, maintenance costs, maintenance costs, material costs, tool costs, etc.) linked, change the passive daily maintenance of equipment for the active daily maintenance of mechanical drivers.

2.Reduces the invisible wear and tear caused by the ambient climate on machinery.

That is, to reduce the impact of environmental factors on the service life of machinery. Since most of the construction machinery is operated in the open air, the operation location is often changed, so its performance is greatly affected by the temperature, environment, climate and other factors of the operation site. Machinery that has been fixed for a long time must have a shutdown room (shed), or take maintenance measures such as covering the top and supporting the wood underneath to reduce the invisible wear caused by sun, rain and rust.

Many construction units ignore the impact of environmental factors on the use of machinery (too low ambient temperature, which can also cause catastrophic consequences to machinery). Failure to take corresponding protective or adaptive measures will lead to the reduction of mechanical performance, shortening of service life, and even accidents.

3.Regular maintenance of machinery is the key to prolonging its life.

The Ministry of Communications road construction and maintenance machinery warranty regulations have clear provisions on the maintenance of machinery, however, many construction units often ignore the maintenance work when the construction period is tight and the task is heavy, thinking that the machinery is operating normally, there is no fault, and there is no need to stop maintenance. This lays the groundwork for future mechanical accidents. Because maintenance can eliminate mechanical hidden dangers, if not maintained in time, it will often cause major failures in machinery and equipment, and even personnel accidents.

This not only increases the maintenance cost, but also delays the construction period.

4.Adopt advanced mechanical testing and other auxiliary maintenance methods.

Mechanical maintenance work is an important part of extending the service life of machinery, and the use of reasonable maintenance methods can effectively extend the service life of construction machinery. According to relevant statistics, the use of advanced condition monitoring means can reduce maintenance costs by 25% and 50%, reduce the failure rate by 75%, and prolong the service life of machinery.

It also contains more bids for engineering services procurement to improve the winning rate, you can click on the official website at the bottom of the customer service for free consultation.

In order to ensure the safe operation of construction machinery and prolong the service life of locomotives, daily inspections are required: If any fault is found during the inspection, the cause should be found out and the locomotive should be adjusted or repaired to prevent the breakdown from spreading. Locomotives operated when they are not troubleshooting, which can lead to serious accidents.

The rock boring machine should be inspected daily, and the visual inspection should be carried out before the starter of Brother Biqing. Ways to check the surroundings of the locomotive and the bottom:

1. Whether there is leakage of organic oil, fuel and coolant.

2. Whether there are loose bolts and nuts.

3. Whether there are wire breaks, short circuits and loose battery joints in the electrical circuit.

4. Whether there is oil stain.

5. Whether there is an accumulation of people's property. After starting the engine, check that the mine TBM, the horn and all the instruments are in good condition.