How to install the sliding table slide? How to install drawer slides Drawer slide installation steps

The furniture slides are almost the same, and the installation of the slides of the sliding table and the drawers is the same, and the method is:

1. Drawer track installation first determine what kind of drawer track to use, generally using three hidden slide rails, please determine the length of your drawer and the depth of the counter according to certain data, in order to choose the corresponding size to install on the drawer.

2. Secondly, assemble the five plates of the drawer, screw on the drawer panel, and put the drawer on the drawer with a card slot after processing, put the drawer on the drawer that has been installed, so that the adjustment nail hole is consistent, and then push the locking nail into the locking drawer and the slide rail.

3. Finally, to install the cabinet, you need to screw the plastic holes on the side panel of the cabinet first, and then install the track removed from above. Both sides of the cabinet should be installed and secured.

How to install the drawer slide.

1.For furniture drawers made on site by carpentry, it is necessary to install drawer pulleys. We first need to determine what the drawer's fancy track looks like, determine the length of the drawer, and then choose the size of the slide according to the corresponding specifications.

2.The installation method of drawers can be divided into low drawers and inner drawers, and the drawer panel of the low drawer still protrudes after the drawer is fully pushed into the box, leaving it on the outside and not in a straight line up and down. The drawer panel of the inner drawer enters the drawer as soon as the drawer is fully pushed into the cabinet and does not remain outside.

3.The drawer slide is divided into three parts: movable rail (inner rail), middle rail, and fixed rail (outer rail).

4.Before the installation of the slideway, the inner rail, that is, the movable rail, needs to be removed from the main body of the slideway, and care should not damage the slideway when dismantling. The method of disassembly is very simple, find the circlip on the inner rail and press it down and gently take out the inner rail.

5.The outer and middle rails in the split slide are installed on both sides of the drawer box, and then the inner rails are installed on the side panels of the drawer. If it is finished furniture, there are pre-made holes in the box and side panels of the drawer to facilitate installation, and if it is made on site, you need to punch holes yourself.

6.Finally, put the drawer into the box, pay attention to press and hold the circlip of the inner rail mentioned earlier when installing, and then slowly push the drawer parallel into the box and to the bottom. The movable rail and the fixed rail have been linked, and the drawer can be pushed and pulled freely.

Precautions for the installation of drawer slides.

1. First of all, the choice of size, the length of the slide rail of the drawer should generally be the length of the drawer pull, if the slide rail is too short, then the drawer will not reach the maximum opening and closing, if it is too long, it will cause the inability to install.

2. For the drawer slide, the installation is still a relatively simple thing, the key is how to dismantle, in some drawer slide how to dismantle the atlas, there are more detailed removal steps, through these steps can be well removed, so if you say that when you want to install, then you can reverse thinking, from the step of dismantling step by step to restore back, then you know how to install the drawer slide.

Find a seller of this on *Bao, which has details.

We all know that drawers are an essential piece of equipment on almost every cabinet because they can be conveniently stored. At the same time, in order to make it easier to use the drawer, we will install a slide on the drawer. You will find that it is more energy-efficient to use drawers with slides, but how do we install slides, I believe many friends will want to know more.

Drawer slides are common accessories in furniture, which are drawers or other moving parts, and moving rails are often equipped with bearings. The material of the drawer pulley determines the comfort of the drawer when it slides.

Plastic pulleys, abrasion-resistant nylon, and steel balls are the three most common materials for drawer pulleys. Gliding quietly, comfortably and smoothly is the best way to distinguish between good and bad rides. For cabinets, if the hinge is the heart of the cabinet, then the chute is the kidney.

Whether large and small storage drawers can be pushed and pulled freely and smoothly depends on the support of the drawer slide. Generally, the bottom drawer slide is better than the side drawer slide, and the overall connection with the drawer is better than the three-point connection. The hidden three-section drawer slide is equipped with an adjustment nail structure, and the drawer height can be adjusted by using the adjustment nail when installed, and then the drawer can be locked with the lock nail of the damping slideway, and the drawer can be pushed and pulled freely.

If you want to remove the drawer, you only need to pull out the lock pegs of the slide and then you can lift the drawer to detach it from the slide. To install drawer slides, first determine which drawer slides you want to use. In general, three hidden slides are used.

Please determine the length of your drawer and the depth of the counter according to certain data, and choose the corresponding size to install on the drawer. Secondly, assemble the five plates of the drawer, screw on the screws, and then place the drawer on the installed drawer, so that the hole of the adjustment nail matches, and then push the lock nail into the lock drawer and the slide.

Finally, when installing the cabinet, you need to screw on the plastic holes in the side panel of the cabinet, and then install the guide rails that are removed from the top, and one slide is fixed in series with two small screws in series. Both sides of the cabinet should be installed and fixed. After the drawer slide rail is installed, align the end of the inner rail of the movable rail on both sides of the drawer side plate with the end of the fixed rail (middle rail), and then gently push it in, you will hear a slight clicking sound, indicating that the movable rail and the fixed rail have been linked, and the drawer can be pushed and pulled freely.

This kind of slide has been around for a long time. It is the first generation of silent drawer slides.

In the new generation of furniture, it is slowly replaced by steel ball slides. The roller slide has a simple structure, consisting of a pulley and two tracks, which can meet the daily push and pull needs, but the bearing capacity is poor and there is no cushioning and rebound function, so it is often used in computer keyboard drawers and light drawers. Steel ball slides are basically two or three sections of metal slides, usually installed on the side of a drawer.

Easy to install and space-saving. The steel ball slide rail can ensure smooth push and pull, large bearing capacity, this kind of slide rail can have the function of buffer closing or compression rebound opening.

There is a spring buckle on the back of the inner rail of the pulley, press it gently, remove it first, and then install the outer rail and the middle rail on both sides of the box body of the drawer, install the inner rail on the side panel of the drawer, ensure that the left and right slide rails must remain parallel, and then install the inner and outer rails, tighten all the two screws at the same time, and then install the drawer and slide it.

First remove all the inner rails, then install the main body of the slide rails, and then install the inner rails.

The fixing method of the drawer slide rail uses vigorous forceps to assist the installation process.

The drawer slide installation method is as follows:

1. Assemble the five plates of the drawer first, screw the screws, and the drawer panel has a card slot, and there are two small holes in the middle for installing the handle.

2. To install the drawer slide rail, you first need to disassemble the track, the narrow one is installed on the drawer side plate, and the wide one is installed on the cabinet body. Everyone should distinguish between the front and the back.

3. Install the cabinet. First, screw the white plastic holes in the side panels of the cabinet, and then install the wide rails removed from above, and fix one slide rail with two small screws one in front of the other. Both sides of the cabinet should be installed and fixed.