What is the difference between wood wax oil construction and ordinary paint construction? 5

The difference between paint and wood wax oil construction technology:

Paint: The construction process is complex, requires professional operations, and needs to be painted several times to complete.

Wood wax oil: the construction process is simple, spraying and hand-made, up to 2 times of painting, and it can also be DIY.

The difference between the scope of application of paint and wood wax oil:

Paint: Poor weather resistance, especially in outdoor wooden structures, poor durability.

Wood wax oil: It can be well used in dry, humid and other environments, suitable for indoor and outdoor furniture, gazebo and other decoration and maintenance, and also has the functions of waterproof, moisture-proof and anti-corrosion.

Difference between the appearance of paint and wood wax oil:

Paint: A paint film is formed after application, which obscures the natural grain of the wood.

Wood wax oil: It will not form a paint film on the surface of wood, and can well reflect the natural texture and natural beautiful texture of wood.

Difference between paint and wood wax oil:

Paint: The paint film can play a role in blocking the contact between the surface of the wood and air and moisture, and cannot penetrate into the inside of the wood fiber, so the wood cannot breathe, and it is easy to cause cracking and falling off.

Wood wax oil: It can penetrate into the tiny pores of the surface of the wood, so that the wood can breathe well, maintain the elasticity of the wood, enhance the firmness of the wood and the strength of the wood surface, and is not easy to crack and fall off.

Difference between paint and wood wax oil composition:

Paint: a resin synthesized from petrochemical products as the base material and processed through a certain process. Its composition often contains trace amounts of benzene, toluene and other chemical synthetic raw materials, which may cause certain harm to any animal and plant, and is not a truly completely environmentally friendly product.

Wood wax oil: It uses natural plant extracts - flaxseed oil, sunflower oil, soybean oil, carnauba wax, candelilla wax organic pigments, it is a pure natural and environmentally friendly product in the true sense.

1. Wipe with a cotton cloth.

If it is a small area of wood wax oil, such as furniture painting, you can use cotton cloth to wipe the wood wax oil to paint the application.

Because it will be more fuel-efficient to rinse and apply with a cotton cloth, and the effect is the best. High-end furniture can choose the method of wiping with cotton cloth, and the wood wax oil wiped out in this way will be thinner, drying speed and smell faster.

2. Brush and brush.

Wood wax oil can also be brushed with a brush, but when brushing, you must pay attention to the thickness of the brush, otherwise the drying speed will be slow. Brushing is a common painting method used by general painters, and it will be better to use it on wooden floors, saving time and effort. If you use a brush, you need to dilute the wax oil, stir well before use, and add a special vegetable thinner.

3. Roller brush.

Wood wax oil is divided into indoor wood wax oil and outdoor wood wax oil, if it is used outdoors, the area that needs to be painted is generally larger, and the use of the above three methods is more time-consuming and laborious. Therefore, it is generally possible to use a roller to paint, such as the exterior wall of a wooden house. However, it must be diluted before use.

4. Spraying method.

If the method of spraying is used for construction, a special plant thinner is also used, otherwise the wood wax oil is too thick and the spraying is uneven. And the spray gun used must be kept clean and dust-free. In addition, it is recommended to filter the wood wax oil with a filter to filter out the particles in the wood wax oil.

At the same time, before spraying, it is necessary to test whether the spraying is uniform and whether the thinness is appropriate on the scraps.

There is no primer and topcoat for wood wax oil, you just need to wipe the surface clean, and then apply it 1 or 2 times with a brush or a clean cotton cloth, and there is no need to sand in between. However, wood wax oil is not the last time everything is fine, and it needs to be re-brushed every two or three years to ensure the effect. The anti-wear principle of wood wax oil is different from that of general paint, it uses the flexibility and toughness of the wood itself to resist wear and tear, and there will be no obvious scratches.

However, the principle of use of wood wax oil determines that it is only suitable for solid wood, and the effect of using different types of wood is also very different.

Wood wax oil construction steps: Step 1: substrate treatment The substrate is generally sanded with 100 sandpaper until smooth and flat.

Thoroughly remove the sanding dust and confirm that the surface to be coated is clean, dry and free of grease and dust. Step 2: Wipe it for the first time Open the wood wax oil and stir well (you can add an appropriate amount of Cheresib deodorant thinner), dip an appropriate amount of wood wax oil with a cotton cloth, and wipe it along the direction of the wood grain, make sure that all the surface layers have been wiped, and clean the excess oil on the surface to ensure that there is no excess oil on the surface.

Step 3: Polishing Wait for the first time to be completely dry, about 4 6 hours or more, use Cherexi special polishing cotton or more than 600 sandpaper to slightly polish and polish the surface layer of wood wax oil, and completely remove the sanding dust. Step 4:

Thin wipe the second time Please wipe again according to the process requirements, generally 2 3 times, between the thin wipe and the thin rub, please follow the third step for slight grinding.

Step 5: Polishing After all the construction steps are completed, use more than 1000 sandpaper or special polishing cotton for Cheresi to lightly polish the surface layer, and clean the surface sanding dust to enhance the feel.

Wood wax oil generally does not divide the primer topcoat, the construction is simple and convenient, and there are wood wax oils that want to make traditional primer topcoats. Wood wax oil construction steps.

1. Polishing the substrate, cleaning the surface dust or the paint brushed before, leaking out the solid wood, and ensuring that the surface is dry and tidy.

2. Stir the wood wax oil evenly, brush it thinly along the wood grain, and wait for it to be done.

Third, the next time after the construction, the wood wax oil construction is generally 2-3 times, and the need to work between each time is to pay attention to the thin brushing and thin coating.

4. Polishing and grinding, polish the surface with sandpaper or polishing surface of more than 1000 meshes to increase the feel and slightly improve the brightness (not a necessary step).

Although wood wax oil is simple and inexperienced, it can also be painted, which is very suitable for DIY, but it is also a matter of precautions.