-
The surface treatment of street lamp poles is usually in the following ways:
1.Galvanized treatment: The surface of the street lamp pole is galvanized, which can effectively prevent the lamp pole from rusting and corrosion.
Galvanizing is to immerse the lamp pole in molten zinc, so that the zinc and the surface of the lamp pole have a chemical reaction to form a strong zinc-iron alloy layer. This treatment has the characteristics of corrosion resistance, wear resistance, and good weather resistance.
2.Spraying treatment: The surface of street lamp poles can be sprayed, and the commonly used spraying materials are polyester powder coating, polyester coating, fluorocarbon paint, etc.
Spraying treatment can form a uniform, smooth and beautiful coating on the surface of the lamp pole, which has the characteristics of anti-corrosion, anti-oxidation and good weather resistance.
3.Anti-corrosion treatment: The surface of the street lamp pole can be treated with anti-corrosion, and the commonly used anti-corrosion treatment methods include hot-dip galvanizing, cold galvanizing, spraying anti-corrosion paint, etc. Anti-corrosion treatment can effectively extend the service life of the light pole and reduce the frequency of maintenance and replacement.
4.Polishing: The surface of the street lamp pole can be polished, and the oxide layer, dirt and other substances on the surface of the lamp pole can be removed by mechanical or chemical methods, so that the surface of the lamp pole is smooth and bright. Polishing can improve the aesthetics of the light pole and increase its visual effect.
5.Coating treatment: The surface of street lamp poles can be painted, and the commonly used coating materials are epoxy resin coatings, polyester coatings, etc. The coating treatment can form a solid, wear-resistant and weather-resistant coating on the surface of the lamp pole, which has the characteristics of anti-corrosion, anti-oxidation and beautiful appearance.
In short, there are various surface treatment methods for street lamp poles, and choosing the appropriate treatment methods according to different needs and environmental conditions can improve the service life and aesthetics of the lamp poles and ensure the normal operation of street lights.
-
There are tea film treatment methods for street lamp poles, baking paint, ordinary anticorrosive paint plus topcoat, blister anticorrosive, electrogalvanizing, and some lamp poles directly use stainless steel, polished kind.
-
1. Animal and vegetable oil stains: scrub with gasoline first, and then clean with soap and warm alkaline water after the oil stains are dissolved.
2. Mold stains: scrub repeatedly with hot thick soapy water, and light stains can be removed in the sun.
3. Collar dirt stains: Wash with hot soapy water or gasoline.
4. Cosmetic oil stains: Wipe with alcohol or gasoline, and then wash with water.
5. Ink stains: Wash with rice porridge or rice grains with a little salt.
6. Paint and asphalt stains: Before the paint is dry, first rub it on the reverse side with gasoline for many times, and then remove it with dilute acetic acid.
7. Perspiration stains: Rub the sweat stains with ginger or winter melon juice, and then rinse with water.
8. Shoe polish stains: wipe off with gasoline, turpentine or wine, and then wash with soapy water.
9. Ink mud oil stains: first remove the oil with carbon tetrachloride, and then wash with warm soap.
10. Oil stains: scrub with carbon tetrachloride or alcohol, avoid boiling water.
11. Soy sauce and vinegar: Dip a toothbrush in salt water (or sugar water) and leave for 30 minutes, then wash with a neutral detergent.
12. Sesame oil and sesame oil: wipe with benzene solution, and then wipe with a wet towel.
13. Chewing gum: Wrap ice cubes in a cloth and put on the gum to cool.
14. Chocolate: Wipe with a damp towel and pat with benzene solution.
15. Nail polish: scrub with alcohol, then wash with water.
-
Wipe with cotton dipped in a small amount of alcohol. Be careful with the use of alcohol, it is flammable and volatile.
-
Maintenance and repair of street light poles:
1. Standardize operating procedures and strictly prohibit illegal operations.
2. Maintenance and replacement of high-pole lamps.
1. In the process of retracting and releasing the wire rope, on the other hand, check the appearance of the wire rope, and on the other hand, pay attention to whether the wire rope has overlapping, strands, rust, broken strands and serious stress. Check whether the individual sliding parts are flexible and reliable.
2. Replace damaged light source appliances, cables, etc., and check whether all fixing bolts are loose, firm, safe and reliable, whether the positioning pins and automatic hooks are flexible and reliable, etc., and should be replaced if the rust is serious.
3. The transmission mechanism such as the motor and gearbox fixed at the bottom of the lamp pole should be closed and covered as much as possible, so as to prevent the insulation damage caused by moisture in the protective ring, check whether the oil in the gearbox is sufficient, and whether the oil is black or has impurities. The movable motor transmission mechanism should be placed in a dry place, and its insulation resistance (not less than 1m) should be tested by a shake meter before operation.
4. The AC contactor, thermal relay, travel switch, command controller and other control appliances in the control circuit of the high pole lamp should be carefully and carefully inspected before operation, and the electrical components found to be problematic should be replaced as soon as possible, and it is strictly forbidden to operate with illness.
5. The grounding protection device and lightning protection device of the high-pole lighting facilities must be routinely inspected before the rainy season every year, and the grounding resistance should be tested and dealt with in time if the grounding resistance value (should be less than 10).
6. The above maintenance contents must be recorded in the establishment of a ledger.
After the maintenance work is completed, the electrical part of the high-pole lighting facilities and the lifting transmission mechanism should be fully inspected again to confirm that they are correct, and then the rising lamp panel can be directly hooked and unloaded before leaving the scene.
The refurbishment of street light poles is to enhance their appearance and function, and extend their lifespan. Here are some methods and steps for street light pole renovation. >>>More
The steps of street lamp installation are usually to erect the light pole first, and then install the lamp head. >>>More
Street light brackets and street light poles are not exactly the same concept, they have some differences. >>>More
A double-arm street light is a common type of street light, which usually consists of a 10-meter-high pole and two arm support luminaires. The foundation size of the light pole refers to the foundation size of the light pole installed on the ground, and its design and construction are essential for the stability and safety of the light pole. >>>More
Street lamp pole advertisements are generally managed and supervised by the city management department. These departments are usually the relevant departments of the city, such as the Urban Planning Bureau, the Municipal Engineering Bureau, etc. They are responsible for the infrastructure construction and management of the city, including the installation, maintenance and management of street lights and advertising. >>>More