-
To insert the SIM card:
1.If your phone is using a standard card, you can use the SIM card directly into the card slot. How to pick up the card: Slide out the SIM card or press and hold the SIM card to push it out.
2.If your mobile phone is using a MicroSIM card or a Nano SIM card, it is recommended that you go to your local network office to cut the card.
To insert a SIM card: Remove the back cover and battery of your phone and push the SIM card in gently.
To remove the SIM card: Slide out the SIM card or press and hold the SIM card to eject.
3.Some mobile phone batteries are not removable (such as A series), if you need to insert or remove the SIM card, please operate: insert the card pick-up needle into the small hole on the SIM card slot and pop out the card slot (make sure that the card pick-up needle is perpendicular to the small hole, otherwise the device may be damaged), gently pull the SIM card tray out of the SIM card tray card slot, and put or take out the SIM card.
-
If you are using a vivo phone, you can go to the phone settings - system management My device - customer service - user manual - mobile phone overview and quick start - installation and preparation to learn how to install and remove the memory card and SIM card. (Some models go to Settings - More Settings - Instruction Manual - Phone Overview and Quick Start - Learn about Installation and Preparation).
-
How should the mobile phone card be installed?
-
Here's how:1. Installed in the card slot, the specific operation steps are as follows: the first step is to open the card slot with a card pick-up needle, as shown in the figure below.
2. The second step is to put the back of the mobile phone card in the card slot, as shown in the figure below.
3. The third step is to place the mobile phone card chip on the outside, as shown in the figure below.
4. Step 4: Turn the card slot over and put another mobile phone card, as shown in the figure below.
5. The fifth step is to put the card slot in, as shown in the figure below.
-
1. Please make sure that the card you are using matches the device.
Please use a standard nano-SIM card and an ultra-micro memory card (NM card), inserting a non-standard card may cause the card tray (slot) to be damaged or the device cannot recognize the card.
2. Take out the card tray and identify the front and back.
Remove the tray by taking the card pin.
The side marked with the character "sim1" in the card slot is the front, and the nano-SIM card can be placed in the corresponding card slot;
The side of the card slot marked with the character "nm" is the reverse side, and nano-sim or nm card can be placed in the corresponding card slot on this side.
3. Put the card into the corresponding card slot.
The card chip is side up, first insert the notched end of the card into the card slot, after it is placed in place, the card will be clamped by the spring at the front of the card slot, and then the card tray can be flipped to place the card on the other side in the same way.
4. Insert the card tray into your phone.
After the card is loaded into the correct card slot, place the card tray and the phone front facing you, keep the card tray and the card on the same plane, and insert the card tray.
5. Precautions and instructions.
Please note that the ultra-micro memory card (nm card) can only be placed in the card slot on the reverse side of the tray, otherwise the device will not recognize it. If you accidentally put it wrongly, please take it out and re-place it, it will not cause damage to the equipment, please rest assured to use it;
When using the card pick-up needle to pick up the card, please pay attention to distinguish between the microphone hole and the SIM card hole, and do not insert the card pick-up pin into the microphone hole. If you mistakenly poke the pickup pin into the microphone pickup, don't worry, because the microphone pickup hole adopts a 90-turn foolproof design, the pickup pin will not poke into the inside of the phone and damage your phone, please feel free to use.
-
How to install and remove the memory card and SIM card of vivo mobile phone:
First, the installation method.
Go to Mobile Phone Settings - System Management My Device - Customer Service - User Manual - Mobile Phone Overview and Quick Start - Installation and Preparation to understand the installation and removal method of memory card and SIM card (some models enter Settings - More Settings - User Manual - Mobile Phone Overview and Quick Start - Installation and Preparation to understand);
Double-layer card tray installation sim card tutorial.
Note: SIM card 1 and SIM card 2 are installed in the same way.
-
The steps to install the mobile phone card are as follows:
1. If you want to install the mobile phone grinding card, after getting the mobile phone, first observe the surroundings of the mobile phone, and you can see a small pinhole on the right side of the mobile phone, and then use the card slot needle that comes with the purchase of the mobile phone to insert the pinhole.
2. If you can't find the card needle or the card needle is accidentally lost, you can also try to replace it with a toothpick, pin and other slender items, and use the card to aim at the hole switch (unlocking hole) on the mobile phone card slot, press hard, and then you can pop out the card slot.
3. Then put in the SIM card, and then press the card slot into it to start using the phone normally.
The summary is as follows: Step 1: After getting the phone, first observe the surroundings of the phone, then you can see a small pinhole on the right side of the phone, and then use the card slot pinhole that came with the purchase of the phone.
Step 2: If you can't find the card needle or the card needle is accidentally lost, you can also try to replace it with a toothpick, pin and other slender items, use the card to aim at the hole switch (unlocking hole) on the mobile phone card slot, press hard, and then the card slot can be ejected.
Step 3: Then put in the SIM card, and then press the card slot into it to start using the phone normally. <>
-
How to put a card on your phone:
1. First take out the mobile phone, and then find the location of the mobile phone card slot;
2. Then use the card needle to insert it into the small hole of the card slot;
3. After insertion, the card tray will automatically push out a small part, if the card tray fails to push, it may be that the angle or method of insertion is wrong, try to be cautious again, do not deal with it brute force;
4. After that, take it out by hand;
5. Finally, place the mobile phone card on the card tray correctly, correspond to the corresponding gap, and then insert the card tray.
Installation Notes:
1. Please use the card pick-up needle that comes with the device, and it is forbidden to use other sharp objects to avoid damaging the card tray hole or scratching the device. If you lose the pin, we recommend that you go to the Huawei Customer Service Center to deal with it.
2. Please keep it properly after use and avoid contact with children to prevent injury or ingestion.
3. If the size of the SIM card does not match the card slot, do not use scissors as a card cutting tool, which may cause damage to the SIM card chip and the device cannot be quietly respected. You can use the card cutter to trim it, or go to the operator's office to handle it.
4. If the card tray hole is blocked or cannot be popped, it is recommended that you back up the data in your phone in advance (WeChat QQ and other data must be backed up separately) and bring the purchase voucher to the nearest Huawei customer service center for testing and repair. <>
-
How to install the mobile phone card:
There will be a card slot on the side of the phone, take out the equipped card pick-up needle, and insert the card pick-up needle tip into the card slot hole. Push the needle toward the inside of the card slot hole and push slightly hard to remove the card slot bracket. Put the ** card face up, put it into the card slot bracket, and push it into the mobile phone to install it successfully.
Precautions for mobile phone card installation:
1. Please use the needle that comes with the device when taking the card, and it is forbidden to use other sharp objects to avoid damaging the card hole or scratching the device. If you lose your PIN, we recommend that you go to the Huawei Customer Service Center.
2. Please keep the key properly after use, away from children, to prevent injury or accidental ingestion.
3. If the size of the SIM card does not match the card slot, do not use scissors as a card cutting tool, which may damage the SIM card chip and make the Zhongjing device unrecognized. You can use the card cutter to cut or go to the operator's business hall to handle it.
4. If the card tray hole is clogged or can not appear suddenly, please do not operate it yourself. It is recommended to back up the data in your phone in advance. Bring the proof of purchase to a nearby Huawei customer service center for inspection and repair. <>
-
To install a SIM card is to put the SIM card into the SIM card slot.
First turn off the mobile phone, then use the card pin to take out the SIM card slot on the left side of the fuselage, take out the SIM card slot, install the prepared SIM card to the corresponding position of the card slot, and then insert the SIM card slot into the SIM card slot of the mobile phone, open the mobile phone to see if the mobile phone can be called**.
The process of applying for a mobile phone card:
1. Go to the selection brother good number machine to choose the number you see, and enter your identity and lead certificate number according to the prompts after selection, and a number appointment list will be issued at this time.
2. Take the list and go directly to the counter to handle the card purchase business.
3. You must use your ID card to buy a card, and you can bring it with you. <>
If there is no signal on your phone or an emergency call prompt is displayed on the screen, it is recommended: >>>More
If you are using a Huawei phone and the system is frozen within a short period of time after the system is upgraded, it is normal >>>More
In fact, the reason for these problems is nothing more than software and hardware problems. The system of the mobile phone itself is bloated, poorly optimized, or there are bugs in the app, which may cause the software to lag when running. >>>More
If you are using a Huawei phone, we recommend that you do the following: >>>More
First install the computer on Samsung's PC suite, and then connect the phone and the computer with a data cable, select the Internet connection on the suite, select the manual configuration access point in the settings, the access point input is CMWAP, the username and password are empty, so that it is connected to the Internet, and then**a dynamic mobile software,**Internet,Otherwise, you can't open the web page,You can go online after starting the software,It should be noted that QQ or other software is required**server,Set to http** The port is the same as IE, both are 6000, so that you can surf the Internet, the network speed is different according to the signal in different regions, the network speed is also different, generally speaking, it can be maintained for a second even if KB is already very good.