Do I need to add some additional additives to ensure the lubrication effect when adding engine oil?

Hello, when adding oil, you need to add some additional additives, to ensure that the lubrication effect is generally useful, but the effect is not necessarily the best, I hope to help you.

This is okay, many times when adding engine oil, you need to add some additional additives to ensure the lubrication effect. However, generally good engine oil has additives and does not need to be added.

No, the engines of current models have a VVT system, which is easy to clog.

When adding engine oil, you don't need to add some additional additives to ensure the lubrication effect, but you need to add good engine oil when maintenance.

When adding engine oil, you need to add some additional additives to ensure the lubrication effect, which I think is very reasonable, because the oil temperature is easy to solidify when it is low, which is different from gasoline, so it should be done according to this requirement.

When adding engine oil, there is generally no need to add some additional lubricants, there is no need.

Don't listen to the master of the 4S shop, there are additives in the engine oil, and there is no need to add any additional additives. The 4S store said this, mainly because it wanted you to spend more money, and it didn't work.

Sometimes you need to add some additional additives to ensure more effect, this formula is better, especially in winter, be sure to add some.

Hello, when adding engine oil, you should add some additional additives to ensure the lubrication effect, which is different in each store, and generally will not be taught.

Do I need to add some additional additives to ensure the lubrication effect? If you don't need it, you have a lubricating effect.

Do you need to add some additional additives when adding gasoline to ensure the printing effect? In this case, the oil must be added in accordance with the requirements of the machinery, and if it is marked, some additional additives can be added to ensure Yunhua, and some liquefaction agents can be added.

Do I need to add some additives when adding engine oil to ensure the atomization effect? This one doesn't need to be filled in.

There may be no additives when adding engine oil, the effect of the lubricating oil is not too big, but people always introduce it very well, you should still go to the 4S shop for maintenance, rest assured.

You don't need to add anything extra when adding oil, you just need to change the oil filter.

Jiaqi sometimes needs to add some additional additives to ensure the lubrication effect.

Do I need to add some additional additives to ensure the lubrication effect when adding engine oil? I don't think this should be necessary, right? As long as there is oil added, he is enough.

There is such a saying, you can add some can increase the effect of its lubrication, you can consult the relevant professionals.

Generally, the original lubricating oil should be used, which is relatively better, because the oil should ensure its viscosity when it is used.

This is not very good, because I haven't seen how he added it, and they usually get it in 4S stores.

He provoked my hand and said, add some additional additives to ensure the emulsifying effect? No, you don't have to add anything else.

I've been driving for more than ten years, and I've never heard of what additives should be added when changing the oil.

I don't know much about this problem, you should go to your nearest car repair shop for advice, and the professional will give you clear guidance.

The raw material of engine oil is mineral oil, and the color will be different after adding various additives, such as light yellow transparent, brown transparent, reddish-brown transparent, etc., all in all, the new engine oil must be translucent, and the oil will show a continuous state when poured.

Generally, we change the engine oil according to the use of the engine oil to decide whether it needs to be replaced, drop the oil on a piece of white paper, and then identify the oil use according to the oil color replacement judgment chart. With constant use, the oil will slowly deteriorate and be mixed with impurities.

1.Fully synthetic engine oil: Fully synthetic engine oil has better high and low temperature performance, longer oil change interval and is suitable for more severe car conditions, suitable for luxury high-performance vehicles, and is replaced at about 10,000-12,000 kilometers.

2.Semi-synthetic engine oil: The replacement cycle of semi-synthetic engine oil is generally about 8000-10000 kilometers, and the performance is moderate.

3.Mineral oil: This type of oil generally needs to be replaced after about 5000 kilometers.

Try to choose multi-grade oil, multi-grade oil has a better protection effect on the engine due to saving, long life and high efficiency. Due to the characteristics of multi-grade oil, there may be premature blackening and less oil pressure than ordinary oil during use.

Hello, the role of engine oil additives is as follows: 1. It is mainly to improve the wear resistance and maintenance of machine spare parts, improve engine torque, reduce engine vibration, and reduce fuel consumption; 2. There are many kinds of additives, which make up for the weaker part of the function in many aspects, or give Buhuai Lao the advantage that it does not have excellent energy; 3. The classification of additives is mainly based on their performance characteristics, and the commonly used additives are: anti-wear agents, defoamers, cleaning and dispersing agents, viscosity index improvers, friction improvers and a series of others.

Yes, whether the owner has encountered this situation, when going to the 4S shop or repair shop to do car oil maintenance, the service staff in the store will take the initiative to recommend some car products to you, such as gasoline additives, oil additives, etc.

From the function of oil additives, it is indeed very consistent with the use of engine oil, and some people have done oil additives tests to prove how good the effect of adding oil additives to engine oil is, from an objective point of view, this does not exclude additive manufacturers from self-promotion, and the test he did was not comprehensive, without considering the working environment of the engine. As we all know, the working environment of the engine is very harsh, the working environment of the engine oil is not optimistic, manufacturers in the launch of oil products, is to do long-term testing and research on the engine oil, including the cleanliness of the oil, anti-wear, volatility and many other properties to achieve the best, if the rash addition of oil additives is likely to destroy the characteristics of the oil, which is why the oil of different manufacturers is best not mixed, mainly because the formula is different. Some car manufacturers clearly state in the car manuals that "no additives need to be added to the oil".

There is no need for additives for branded fully synthetic oils, which already contain additives with the same properties as additives.

To promote the run-in of new cars, it is not bad to add money.