-
Anonymous users2024-02-061. According to the construction habits, the general inspection batch.
There are several ways to calculate capacity:
1) The inspection batch capacity is the main engineering quantity of the current construction section, and the specific performance is that the inspection batch capacity is "m3" when the concrete is poured, and the inspection batch capacity is "t" when the reinforcement is installed.
2) The inspection batch capacity is the construction scope of the current construction section, which can be understood as the horizontal projection area of the current construction section, and the specific performance is that the inspection batch is "m2" when concrete pouring, reinforcement installation and formwork installation.
3) The inspection batch capacity is the number of components under current construction, and the specific performance is that the inspection batch capacity is "root" when the frame column is poured concrete, and the inspection batch capacity is "樘" when the doors and windows are installed.
2. Inspection batch capacity:
It refers to the quantity of the inspection batch, which is filled in according to the actual project, and the measurement items and units are specified in the professional acceptance specifications for the inspection batch capacity. There are generally two categories of inspection batch sizes: finite and unlimited.
3. Examples: 1) Brick masonry inspection batch, limit value 250m masonry. According to Article 1 of the Code for Acceptance of Construction Quality of Masonry Structure Engineering (GB50203-2011), the division of masonry structure engineering inspection batch shall meet the following requirements at the same time:
a. The type of material used and the strength grade of the same type of material are the same.
b. No more than 250m masonry.
c. A floor of the masonry of the main structure (the basic masonry can be counted as one floor); When the volume of infill wall masonry is small, multiple floors can be combined.
2) The roof is sub-inspected and approved, with a limit of 1000
Basis: "Roofing Engineering Quality Acceptance Specification".
GB50207-2012) Roofing works of each sub-project.
It is advisable to divide an inspection batch according to the roof area every 500 1000, and less than 500 should be divided into an inspection batch; The sampling quantity of each inspection batch shall be carried out in accordance with the provisions of Chapter 4 and 8 of this specification.
3) Plain soil, gray soil foundation inspection batch, unlimited value.
According to the "Code for Construction Quality Acceptance of Building Foundation Engineering" (GB50202-2002), there are no clear provisions.
4) Template installation inspection batch, unlimited value.
According to the "Code for Quality Acceptance of Concrete Structure Engineering" (GB50204-2002), there is no clear provision.
-
Anonymous users2024-02-05The new unified standard is currently a headache for the majority of our data personnel. I also attended some training and bought some books on the subject. Let me share it with you based on my learning. Please forgive me if there is any ambiguity. If you don't like it, don't spray thank you!
This is the "Sample Book of Unified Standard Packages Produced by Hengzhi Tiancheng Company" that I just purchased recently, <
Let's take a look at the following one**:
We see that the column of inspection batch capacity is given - beam: 25 pieces, columns: 35 pieces, plates: 42 rooms. Why is there 13 places in the actual sampling book for the first item in the following master control item?
That's how it's calculated
Beam: 25 pieces, in accordance with the provisions of the minimum sampling quantity of the inspection batch on page 6 of the unified standard specification 16-25, the minimum sampling quantity is taken in 3 places;
Column: 35 pieces, in accordance with the provisions of the minimum sampling quantity of the inspection batch on page 6 of the unified standard specification 26-90, and the minimum sampling quantity is 5;
Plates: 42 rooms, in accordance with the provisions of the minimum sampling quantity of the inspection batch on page 6 of the unified standard specification 26-90, and the minimum sampling quantity is 5;
It follows that there are 3 beam inspections, 5 column inspections, and 5 plate inspections, so the actual spot checks are carried out according to 13 places.
We look at the instructions given in the following book, which are also clearly written:
Because the acceptance items in the inspection batch of "formwork installation inspection batch quality acceptance record" involve beams, plates, and columns at the same time. So it's relatively complicated, and I hope my sharing can help everyone.
How to calculate the inspection batch capacity for different structural parts of steel bars and formwork?
The training of construction industry experts and teachers is as follows: Rebar can be calculated by batch or model.
-
Anonymous users2024-02-04Abstract inspection batch capacity refers to a certain number of inspection bodies that are aggregated for inspection under the same production conditions or in a prescribed manner.
The inspection batch refers to the test body composed of a certain number of samples that are aggregated for inspection under the same production conditions or in a prescribed manner. It is an architectural term, and attribute is the basic unit of project quality acceptance, which is applied to construction and bridge engineering.
If inspection data has been maintained in the quality management view of the material master file of the item being produced, the system automatically creates an inspection batch as soon as the first operation in the production order is released. You can also manually create inspection batches in a production order.
What is inspection batch capacity
The inspection batch capacity refers to the inspection body composed of a certain number of inspection bodies that are aggregated for inspection under the same production conditions or in a prescribed manner. The inspection batch refers to the test body composed of a certain number of samples that are aggregated for inspection under the same production conditions or in a prescribed manner. It is an architectural term, and attribute is the basic unit of project quality acceptance, which is applied to construction and bridge engineering.
If inspection data has been maintained in the quality management view of the material master file of the item being produced, the system automatically creates an inspection batch as soon as the first operation in the production order is released. You can also manually create inspection batches in a production order.
How to fill in the capacity of the inspection batch for the installation of the foundation cushion template.
Extended dataIn the production process, it is sometimes necessary to perform inspections to ensure product quality. An inspection batch records an inspection request. An inspection characteristic is assigned to an inspection batch, and an inspection characteristic defines what needs to be inspected.
Characteristics are distinguished into qualitative properties and quantitative properties. An inspection batch is created for a production order with a work-in-process inspection. Properties are assigned to individual operations in the order.
Characteristics define inspection requirements. The results of each inspection are then recorded and stored in the inspection batch. Additional information about inspection lots.
If a sub-project needs to be inspected many times, then each inspection is called an inspection batch, and the industry stipulates that the inspection parts of each inspection batch must be exactly the same. The inspection batch is only for inspection, not for evaluation.
The floor area of the building is 340 square meters, and the inspection batch capacity should be written.
That is to say, fill in at least 100 square meters, right?
I'm not a professional in this either, but I've just found some information for you, and you can ask an experienced person to ask.
-
Anonymous users2024-02-03There are several ways to fill in the general inspection batch capacity:
1) The inspection batch capacity is the main engineering quantity of the current construction section, and the specific performance is that the inspection batch capacity is "m3" when the concrete is poured, and the inspection batch capacity is "t" when the reinforcement is installed.
2) The inspection batch capacity is the construction scope of the current construction section, which can be understood as the horizontal projection area of the current construction section, and the specific performance is that the inspection batch is "m2" when concrete pouring, reinforcement installation and formwork installation.
The main technical contents of this revision:1. Improve the basic regulations on acceptance;
2. The provisions on the expansion of the inspection batch capacity of certified products or products that have passed continuous inspection have been added;
3. The acceptance provisions for template removal are deleted;
4. Added the acceptance regulations for new steel application technologies such as formed steel bars;
5. The acceptance provisions for the fully enclosed waterproof performance of unbonded prestressed tendons have been added.
The above content refers to: Encyclopedia - Concrete Structure Engineering Construction Quality Acceptance Specification.
-
Anonymous users2024-02-02The inspection batch capacity is the engineering quantity in the main acceptance project in the inspection batch. For specific acceptance items, the inspection batch capacity is the number of acceptance entities calculated according to the unit of measurement specified in the quality acceptance specification. There are multiple acceptance items for an inspection batch, and there may be multiple acceptance entity objects.
In the production process, it is sometimes necessary to perform inspections to ensure product quality. An inspection batch records an inspection, please ask for this. Inspection characteristics are assigned to inspection batches.
An inspection characteristic defines what needs to be inspected. Characteristics are distinguished into qualitative properties and quantitative properties. An inspection batch is created for a production order with a work-in-process inspection.
1. The silage cellar is divided into three types: underground, semi-underground and aboveground, round or square, diameter or width of 2-3m, and depth. Brick and cement are usually used as materials, and drainage outlets are reserved at the bottom of the cellar. Generally, it is decided which one to use according to the level of groundwater, local habits and ease of operation. >>>More
This kind of thing is written casually, and no one reads it.
When the child is sick, the parents of the world will understand.
According to the Labor Contract Law, resignation only requires a written application 30 days in advance. That is to say, as long as you apply 30 days in advance, it is not your fault that you do not go to work after 30 days, it is not considered absenteeism, and it has nothing to do with the enterprise (unit), what is related is the relationship between the settlement of salary, insurance, and benefits. As for the 10-day work break, look over whether there are such labor agreement terms with the enterprise, and whether the salary is calculated by the piece or the number of days. >>>More
> body mass index (BMI).
Body mass index (BMI) = the square of an individual's weight (kg) and height (m), which is one of the commonly used indicators to measure how fat and thin a human body is. >>>More