How to open the Baojun 510 cruise control

Live demonstration of the use of Baojun 510 cruise control, novices can learn it after watching it, it is very simple.

How to use Baojun 510 cruise control:

The cruise control function is generally used at high speeds, once the cruise speed is set, the fuel supply of the engine is controlled by the computer, so that the car always keeps driving at the set speed without manipulating the throttle.

First of all, you need to press the ON off button of cruise control to turn on the cruise control of the car, and then the cruise main indicator light will be on, and the cruise control system will start working.

When the car reaches a certain speed, press the Set Coast button to set the current speed, it should be noted that the speed of the car must be greater than 30km h, then the cruise setting indicator light is cautiously bright.

After the accelerator is lowered, the cruise control function will drive at the set speed, but the right foot needs to be placed next to the brake pedal, and you need to be ready to brake at any time if an emergency occurs.

Cruise control can increase or decrease the speed of the car by pressing the button, pressing res accel to increase the speed, and pressing the set coast to decrease the speed.

During the driving of the car, press the cancel button or tap the brake pedal, the cruise control function will be suspended, and the cruise indicator will also be extinguished at this time, and the car will continue to drive at the previous speed if you continue to press the Res Accel button.

How to use Baojun 510 cruise control is as follows:

The cruise control function is generally used at high speeds, once the cruise speed is set, the fuel supply of the engine is controlled by the computer, so that the car always keeps driving at the set speed without manipulating the oil and land judgment door.

First of all, you need to press the ON off button of cruise control to turn on the cruise control of the car, and then the cruise main indicator light will be on, and the cruise control system will start working.

When the car travels to a certain speed, press the set coast button to set the current speed, it should be noted that the speed of the car must be greater than 30km h, then the cruise setting indicator light is on.

When the throttle is lowered, the cruise control function will drive at the set speed, but the right foot needs to be placed next to the brake pedal, so you need to be ready to brake at any time if an emergency occurs.

Cruise control can increase or decrease the speed of the car by pressing the button, pressing res accel to increase the speed, and pressing the set coast to decrease the speed.

When the car is driving, press the CANCEL button or tap the brake pedal, the cruise control function will be suspended, and the cruise indicator will also go out, continue to press the Res Accel button, and the car will continue to drive at the previous speed.

Summary:

When walking at high speed for a long time, cruise control is generally used, which not only saves fuel, but also makes it a lot easier for the driver. Therefore, for those drivers who often run at high speeds, it is necessary for the vehicle to be equipped with cruise control.

The method of use is to press the on/off button, turn on the system, and the dashboard cruise indicator lights up. To accelerate to the desired speed, press the SET button, at which point the right foot can release the throttle, and the speed will be set at the current speed.

Baojun 510 owners can fine-tune the speed by pressing res+ and set-. There are three ways to release cruise control, which are to press the brake, press the cancel button, and press the switch onoff button. If you press the brakes or press the cancel button to cancel the cruise control, you can press the res button to return to the previous cruise speed.

Cruise control system is abbreviated as CCS, also known as cruise control device, speed control system, automatic driving system, etc. Its function is to close the switch at the speed required by the driver, and the shirt brigade does not need to press the accelerator pedal to automatically maintain the speed of the vehicle, so that the vehicle can drive at a fixed speed. With this device, the driver no longer has to control the accelerator pedal after a long drive on the highway, reducing fatigue and reducing unnecessary speed changes, which can save fuel.

Photo by Wu Jiahong of Pacific Automobile Network).

Baojun 510 fixed-speed cruise control is an automatic driving system that automatically maintains the speed of the vehicle without stepping on the accelerator pedal at the speed required by the driver, so that the car can drive at a fixed speed, also known as the speed control system.

The use of Baojun 510 cruise control is as follows: first of all, you need to press the ON off button of cruise control to turn on the cruise control of the car, and then the cruise main indicator light of cruise main is on, and the cruise control system will start working.

1. Cruise operation method for normal driving: first press the ON off button to turn on the cruise control, the cruise main indicator light is on, and the cruise control system works. Accelerate to the desired speed, press the set button, and then the right foot can release the throttle, and the speed is set at the current speed.

Place your right foot next to the brake pedal and be ready to deal with emergencies. While cruising, press Res Accel to increase speed, press Twist Set Coast to decrease speed, and Twist to adjust the cruising speed.

2. Cruising operation method for curves or deceleration: press the cancel button or tap the brake pedal; The cruise will be temporarily stopped and the cruise indicator will be off. Coast to slow down or control the throttle, press the Res Accel button after cornering; Continue driving at the previous speed.

Introduction to cruise control system: cruise control system is also known as cruise control device, speed control system, automatic driving system, etc.

The cruise control function is generally used at high speeds, and the fuel supply of the cruise engine is controlled by the computer, so that the car always keeps driving at the set speed without controlling the throttle.

Photo by Pacific Automobile Network Q&A).

How to use the Baojun 510 cruise control:

The cruise control function is typically used at high speeds. Once cruise control is set, the engine's fuel supply is controlled by a computer, so that the car can always travel at the set speed without having to operate the throttle.

First, you need to press the cruise control on and off button to turn on the car's cruise control. At this time, the cruise main cruise main indicator lights up and the cruise control system starts working.

When the car reaches a certain speed, press the Set Coasting button to set the current driving speed in several degrees. It should be noted that the speed of the car must be greater than 30kmh, and then the cruise setting indicator light is on.

After the Panasonic accelerator, the cruise function will run at the set speed, but the right foot needs to be placed next to the brake pedal. If there is an emergency, you need to be ready to brake at all times.

Constant speed cruise can increase or decrease the speed of the car by pressing the button, press the res accel to increase the speed, and set coast to decrease the speed.

When the car is moving, if you press the cancel button or press the brake pedal, the cruise function will be suspended and the cruise indicator will turn off. If you continue to press the Res Accel button, the car will continue to travel at the previous speed.

Baojun 510 has a fixed speed cruise, the reason for the configuration of a fixed speed cruise is to reduce the fatigue of the driver, avoid engine speed fluctuations, improve fuel economy, and accurately control the speed of the car to avoid speeding.

Baoqing Wuqijun 510 fixed speed patrol is good, the navigation is on the steering wheel, after starting the cruise control system, the car can maintain the current speed under the brake pedal, the function is canceled immediately. In addition to canceling this function with the brake pedal, there are also operating switches such as the parking brake and clutch that can cancel the cruise control function.

The system only works in (if any) gear, at speeds between 40 km h and 120 km h, and at engine speeds below 4800r min. For automatic transmissions, the minimum speed for cruising is 48 km/h.

The cruise indicator on the instrument cluster starts to flash, indicating that the cruise system has entered the standby state, and then the middle button is toggled in the direction of "set -", the cruise will start, and the corresponding logo will be displayed in the instrument panel information window. (For example, when the driver wants to set the speed at 100km h, then the driver must first drive the speed of the vehicle to 100km h, when the speed reaches 100km h, press the button (as shown below), and then move the button in the middle to the direction of "set -", release the accelerator pedal at this time, the vehicle will continue to drive at a speed of 100km h,) after setting the cruising speed, you can still accelerate with the accelerator pedal according to the conventional method, after releasing the accelerator pedal, The system then returns the vehicle speed to the original cruising speed.

Once the cruise function is activated, do not move the gear lever directly into neutral without pressing the clutch pedal, otherwise it may overspeed the engine and cause damage. Step 2: How to release the cruise, when you find that there is an emergency in front of you and need to slow down immediately during the cruise control, press the brake pedal or clutch pedal, or press the cruise exit button at the fixed speed, you can exit the current cruise state, enter the cruise standby state, and the instrument cruise indicator flashes; If it is in the cruising state, the entire cruise system will be exited and the instrument indicator will be turned off.

Photo by Pacific Automobile Network Q&A).