How long does it take for a Supor rice cooker ball kettle to steam rice

1.The length of time is related to the amount of rice cooked;

2.When boiling the amount of millet, boil the boiling water for 5-10 minutes and cook the rice for 10-15 minutes, totaling about 25-30 minutes;

3.When boiling the amount of rice, it takes about 30-40 minutes, because it takes ten minutes more to boil a large pot of water than the amount of millet, and it is generally necessary to simmer it after cooking, and the taste will be better;

The length of time is related to the amount of rice cooked;

When boiling the amount of millet, boil the boiling water for 5-10 minutes and cook the rice for 10-15 minutes, totaling about 25-30 minutes;

When boiling the amount of rice, it takes about 30-40 minutes, because it takes ten minutes more to boil a large pot of water than the amount of millet, and it is generally necessary to simmer it after cooking, and the taste will be better;

Steaming rice in a rice cooker is generally good for about 15 minutes, so don't worry, the rice cooker will jump automatically when the rice is cooked.

How much water do you put in steaming rice? Generally speaking, rice cooker steaming rice varies depending on the type of rice, and the stem rice is generally based on the volume ratio: rice 3: water 4.

The rice cooker should be steamed with a slap (just lay your palm flat, probably soak your palm). If you want to be a little more refreshing, a little less water.

If you are using a Supor rice cooker ball kettle.

In this case, steamed rice.

It takes about 40 minutes to an hour, because it takes longer to simmer the rice to make it taste better.

Cook brisk for 40 minutes. Cook for 60 minutes. Rice requires a process of water absorption, and only enough water is absorbed to cook rice into rice.

Twenty minutes is enough, and it is recommended to put a sausage on top when steaming rice!

Answer: Hello, it generally takes about 40 minutes to cook in a rice cooker, because the rice will simmer for a while after boiling.

Supor ball kettle rice cookerTo use the reheat function, simply press the heat button.

1.For example, if it is 12 noon and you want to make an appointment to complete the soup at 6 p.m., and set the soup cooking time to 3 hours, the specific operation is as follows:

2.In the function selection state, press the "Function Selection" button to select the "Soup" function, the "Soup" function indicator light is on, and the "Start" light flashes;

3.The digital screen displays the default cooking time of the "soup" function "02:00", and"Timing"The indicator light is on, press the "Hour" button directly to set the soup cooking time to "03:00".

4.After the timer is set, press the "Appointment Timing" button, the "Appointment" indicator light will be on, and press the "Time" button to adjust the appointment time to "06:00";

5.After the reservation and timer are set, press the "Start" button to enter the "Soup" function reservation status, and wait for the countdown of the appointment time.

When it's time to cook, the rice cooker automatically enters the cooking state of the "soup cooking" function.

Notes:

Before hot and cold rice, use a rice spoon to spread the rice so that it spreads flat at the bottom of the pot, and if the cold rice is dry, you can add a little boiling water to stir the cold rice well, so that the effect of hot rice will be better. Press the function button for heating the cold rice after the lid is changed, and the rice cooker will show that the cold rice is heated.

The "cold rice heating" function of the rice cooker determines the moisture content of the cold rice and sets and maintains the optimal bottom temperature for heating, so that the hot rice is soft and delicious, and the effect is no different from freshly cooked rice.

You can choose the fragrant bomb boiling function, and generally cook it for about 25-30 minutes according to the amount of rice. Here's how:

Ingredients: 3 cups of rice, 520ml of water, 1 160g onion, 50g of lard, 3 tablespoons of soy sauce paste.

Production steps: 1. Material preparation.

2. After the rice is washed, pour it into the pot, add water to the marking line 3, and put it into the main body of the rice cooker.

3. The rice cooker is powered on, the incense bomb cooking light is on, press the start button to enter the rice cooking mode.

4. Cut the onion in half and peel it, cut it into shreds, melt the lard in a pan over medium heat, pour in the shredded green onions, and fry over low heat until the green onions are crispy and slightly browned.

5. After cooking, simmer for 5-10 minutes, open the lid and use a wooden spoon to loosen the rice.

6. Serve a bowl of rice, pour a tablespoon of scallion oil and a tablespoon of soy sauce paste, and mix well.

First take out the inner liner of the Supor rice cooker, put in the rice and wash it, then add an appropriate amount of water, put the inner liner of the rice cooker back into the rice cooker, plug in the power supply, press the function button to select the rice cooking function, and the rice cooker will start automatically until the rice is cooked, and it will automatically enter the state of heat preservation.

Summary. 1. First, put the rice in the rice cooker. The amount of food you need depends on the amount of food you need.

2. Then pour in appropriate water and wash the rice, commonly known as washing rice. Pour the water into the rice cooker, then take a wooden spoon to scoop the rice, stir the rice, wash it, and then pour the water out.

3. After the rice is cleaned, put in appropriate water. In general, the amount of water is determined according to the amount of rice.

4. Then, start steaming the rice. Place the liner inside the rice cooker and close the lid. Plug in the power of the rice cooker, press the power button and start steaming the rice.

5. After the rice is steamed, the rice cooker will automatically trip to the state of heat preservation. Wait about 10 minutes and you'll be ready to eat.

How to steam rice in the Supor ball kettle HC32 rice cooker.

Hello. There are several steps that can be taken in the following steps.

1. First, put the rice in the rice cooker. The amount of food you need depends on the amount of food you need. 2. Then pour in appropriate water and wash the rice, commonly known as washing rice.

Pour the water into the rice cooker, then take a wooden spoon to scoop the rice, stir the rice, wash it, and then pour the water out. 3. After the rice is cleaned, put in appropriate water. In general, the amount of water is determined according to the amount of rice4、Then, start steaming the rice。

Place the liner inside the rice cooker and close the lid. Plug in the power of the rice cooker, press the power button and start steaming the rice. 5. After the rice is steamed, the rice cooker will automatically trip to the state of heat preservation.

Wait about 10 minutes and you'll be ready to eat.

First, put the rice into the rice cooker and wash it, then add an appropriate amount of water, plug it in, and press the indicator button for steaming rice. The specific steps are as follows:

1. First, put the rice in the Supor rice cooker. It is determined based on the total amount of meals needed. One bowl of rice will steam out 2 bowls of rice.

2. Pour in the appropriate water, clean the rice, and then pour the water away.

3. After the rice is cleaned, put in appropriate water. The amount of water is determined according to the amount of rice, and the ratio of water to rice is 1:1, that is, a bowl of rice and a bowl of water.

4. Then wipe the water around the inner bowl of the Supor rice cooker, otherwise there may be a risk of electric shock.

5. Then, put the inner tank into the Supor rice cooker, close the lid, and plug it in.

6. Press the power button to start steaming the rice. If there is no problem with the power connection, the indicator light of the Supor rice cooker will illuminate. It takes about half an hour to 40 minutes for the rice to be steamed.

7. After the rice is steamed, the rice cooker will automatically trip to the state of keeping warm, and wait for about 10 minutes before you can start eating.

Note: How do I determine how much water to add? The easiest way is to wash your hands, open your palms, put them in the rice cooker, and flood your fingers with the water surface to the place where your palms and fingers meet. If you want to eat softer rice, you can just use a little more water.

Hello dear, glad to answer for you. The first thing to rule out when the rice cooker does not display the time is whether it is powered on, if the power is normal, look at whether your rice cooker has a display screen. Some rice cookers have a single function, so they won't come with a display.

Because the power will be automatically cut off after the program ends. On the other hand, if there is still no time to appear with the limb stimulation display, then it is very likely that you did not select the program. Supor rice cooker cooking rice no time to show don't worry.

First see if the electricity is on to accompany the rice cooker, if it is powered on, then wait for a while. Today's rice cookers are so smart that they will automatically start cooking rice when they press the program button. The user will be alerted when it is almost cooked.

There are six reasons for this: one is that the power plug is not bad, the contact is not good, or the power cord is damaged. The second is that there is a foreign body in the inner tank, which leads to poor contact between the inner tank and the heater.

The third is that the metal sheet of the heat preservation key of the rice cooker is damaged, causing a short circuit. Fourth, the inner liner of the rice cooker is deformed, and the fuse resistor is burned out due to uneven heating. Fifth, the rice cooker has a selection switch, and the switch is faulty.

Sixth, it is because of the broken wires inside the rice cooker. If there is a problem with some parts that do not need to be disassembled, then we only need to repair or replace it, and if it is a technical overhaul, then contact the after-sales service to solve it.

What are the solutions:

If there is a problem with the power supply, then you need to check the plug and power cord first, and replace them in time if they are damaged.

If there is a foreign substance in the inner tank that causes poor contact with the heater and does not heat it, then it is necessary to remove the foreign matter and wipe the outer bottom of the inner tank clean.

If the thermal insulation key metal sheet of the rice cooker is broken, you need to replace it with a new metal sheet, you can contact the after-sales service to solve it.

The deformation of the inner tank causes the fuse resistor to be burned out, and the inner tank and fuse resistor can be replaced in time to continue to be used.

If there is a broken wire inside the rice cooker, you need to re-check the broken place and then reconnect it, which is a very professional job that needs to find a maintenance person to deal with it safely.