How to install the small black lid on the movable cover of the Midea rice cooker?

The lid of the low-sugar rice cooker can be opened at an angle close to 90°, and it will not tilt itself after standing, making it easier to take the food. After opening the panel, you can see the stainless steel cover, surrounded by a food-grade sealing rubber ring, and a temperature sensing device. In order to facilitate cleaning, the lid of the Midea low-sugar rice cooker has a quick-release design.

It's just that he's "using" you, and he doesn't really love you, so he will only contact you at these three moments01 When a man is only using you, he will contact you at these three moments. And not love you. Such a man doesn't want your life to be happy.

The electrostatic precipitator is a device that collects dust in flue gas by electrostatic purification method. It is an ideal equipment for purifying industrial exhaust gases. Its net profit work mainly relies on two systems: discharge electrode and precipitation electrode.

When the electrode space of high-voltage direct current is input between the two poles, anions and cations are generated, which act on the surface of the exhaust gas dust particles passing through the electrostatic field, move to the electrodes of opposite polarity under the action of the electric field force, and deposit them on the electrodes to achieve the purpose of dust collection. The two-pole system has a rapping device, when the hammer type periodically knocks the two-pole device, the dust adhered to it is shaken off and falls into the lower ash hopper and discharged out of the machine through the ash discharge device. The purified exhaust gas is discharged into the atmosphere through the chimney from the outlet, and the flue gas purification process is completed at this time.

Take out the outer cover first, and then break the white plate of the inner lid to remove it. Here's how:

1. Close the lid of the rice cooker, then break the outside with your index finger up and press down with your thumb.

2. Remove the outer fixed cover, and then remove the inner cover.

3. You can see that the cover has been prompted to remove the cover, and disassemble it according to this method.

4. Grab the cover plate with one hand and push the white buckle upward.

5. Break the buckle with the other hand so that it can be removed.

The way to remove the Midea rice cooker lid may vary from model to model, the following are the steps to remove the Midea rice cooker lid under normal circumstances:

1. Make sure the rice cooker has been powered off and cooled. If the rice cooker has just been used, you will need to wait for it to cool down to room temperature before disassembling it.

2. Flip the rice cooker to the back and find the buckle under the lid. Some Midea rice cookers have a screw underneath the lid that you need to use a screwdriver to unscrew.

3. Use a tool (such as flat-nose pliers) to gently open the buckle. Be careful not to use too much force to avoid breaking the buckle.

4. Remove the lid. When the snap is opened, you can gently remove the cover.

5. Clean the lid. Before removing the lid, you can clean the lid to remove any remaining food or dirt.

6. Reinstall the cover. After cleaning the lid, you can reattach it to the rice cooker and secure it using snaps or screws.

It should be noted that different models of Midea rice cookers may have different disassembly methods, so it is recommended to check the instruction manual or consult after-sales service before disassembly. In addition, it is necessary to pay attention to safety when disassembling to avoid accidental injury.

<> To remove the Midea rice cooker lid, follow these steps: Self-ordering.

Make sure the rice cooker has been disconnected from the power supply and that there is no heat or steam generated inside. Wait for the rice cooker to cool completely.

Locate the fixture on the rice cooker lid, usually two or four screws or snaps. These fixtures may be located on either side or at all four corners of the lid.

Use an appropriate tool, such as a screwdriver or flat-edged screwdriver, to loosen the lid fixture by unscrewing the screws or pressing the clip.

Once the fixture is loose, you can gently lift or push the lid open to remove it from the main body of the rice cooker.

Please note that removing the rice cooker lid may vary depending on the model and design. It is best to refer to the rice cooker's user manual or the manufacturer's removal guide before proceeding with the disassembly to ensure proper operating procedures and safety precautions. If you are unsure how to proceed with the disassembly, it is advisable to consult the manufacturer or seek the help of a professional.

The removal method of Midea rice cooker lid may be slightly different depending on the model of rice cooker, here are some general operation steps for reference:

Pour out the meals from the rice cooker first, then unplug the cord and wait for the rice cooker to cool down to room temperature.

Pick up the rice cooker, flip it over so that its bottom is facing up, and find the screw or clip that fastens the lid.

Using a screwdriver or tool, loosen the screws or unfasten the clips and remove the fastening cap.

Place the fastening cover on a flat tabletop and use a screwdriver or tool to loosen the screws on the fastening cover or unfasten the buckle to remove the cover.

If the liner or other parts need to be cleaned or repaired, it can be operated as needed, and after the operation is completed, the installation and assembly can be carried out according to the reverse steps.

It should be noted that when disassembling and repairing the rice cooker, it is important to pay attention to safety and do not touch the power cord and power plug of the rice cooker to avoid electric shock. Additionally, if you are new to the disassembly and repair of rice cookers, it is advisable to seek professional help.

First, make sure that the rice cooker has been de-energized and completely cooled. Next, you can remove the lid of your Midea rice cooker by following these steps:

1.Carefully inspect the perimeter of the lid to see if there is any wear or damage. If there are any problems, they should be repaired or replaced as soon as possible.

2.Remove the liner from the cooked staple food so that the outside can be cleaned and maintained.

3.Follow the instructions and separate the pot from the lid.

4.Leave the lid perpendicular to the rice cooker housing for easy access to most surfaces on the bottom of the lid.

5.To determine if there are any fixing points on the lid, you need to unlock it with a tool. There may be clips, screws, small buckles, etc. on the lid, depending on different models.

6.When removing the various parts of the pot lid, pay attention to gentle disassembly to avoid damage to the rice cooker.

How to remove and wash the lid of the rice cooker:

1. The lid of the rice cooker can be disassembled, find the white silicone in the middle, and hold the aluminum sheet on the inside with your hand and pull it down.

2. Dip a scouring pad in dish soap.

Wipe it and rinse it thoroughly with water at the end, because dish soap has a peculiar smell at high temperatures, which can affect the taste of your rice and your health.

3. The lid of some rice cookers is not detachable, because there is a silicone gasket around the aluminum sheet and between the plastic, which can also be cleaned by the above methods.

The pot body rice cooker has two layers, inner and outer or three layers, inner, middle and outer. The inner pot body is used to hold the food to be cooked, often made of aluminum alloy and enamel.

or stainless steel, the inner surface of which is coated with PTFE.

to prevent food from sticking to the pan.

Electric heating elements. It is usually a metal tube type, and most of them are cast in aluminum to generate heat.

In the plate, the heat emitted through the heating plate evenly heats the bottom of the inner pot body. Generally, rice cookers are equipped with only one electric heating element at the bottom.

Temperature control and timing deviceThe temperature control device commonly used on ordinary rice cookers is generally composed of two parts: a temperature limiter and a thermostat. The former ensures that the pot temperature will not exceed a certain value (usually 103 2), and is installed in the cavity in the center of the heating plate; The latter ensures that the food in the pot is stable at 60 80 after cooking, and is installed under the heating plate or other suitable position. After the 80s, timers were more and more used in rice cookers, mainly clockwork mechanical timers.

1. To disassemble the lid of the Midea rice cooker, you need to prepare the following tools: Phillips screwdriver, flathead screwdriver, and self-tapping screw.

2. Next, use a flathead screwdriver to pry open the lid handle of the Midea rice cooker, and use a Phillips screwdriver to unscrew the screws in the handle and remove the handle first, as shown in the figure below.

3. Next, you need to open the lid of the Midea rice cooker, there are two screw holes sealed with rubber in the rotating position of the lid, and use the prepared thin self-tapping screw tool to take out the rubber, as shown in the figure below.

4. Then use a Phillips screwdriver to unscrew the two screws, and remove one of the screws at the exhaust hole on the lid to disassemble the panel of the lid, as shown in the figure below.

5. Next, after opening the lid panel of the Midea rice cooker, remove the connecting rod inside and the pressure sealing ring in the lid, and then remove the lid lock ring, as shown in the figure below.

<>7. Finally, the lid of the Midea rice cooker is disassembled, as shown in the picture below.

How to disassemble the lid of the Midea rice cooker: 1. Open the lid of the rice cooker, and then you can see the buckle on the inner lid. 2. Press the buckle hard, and then you can open the inner cover.

3. Above the outer cover, there is the outlet of the rice cooker, you only need to squeeze hard at the gap to take out the exhaust hole, and then rotate it to the left to open it. A rice cooker is a cookware that converts electrical energy into heat energy, which is fully functional, easy to use, and relatively safe. When buying a rice cooker, try to buy products from big brands, and when choosing a rice cooker, try to buy fully functional equipment.

When purchasing, consult the material of the rice cooker liner, do not have the liner with harmful substances, check whether there are traces of damage, and the power cord and plug can be used normally. Tips for using the rice cooker: When using the rice cooker to cook rice, the button will automatically turn on after cooking, wait for the heat to dissipate for a period of time before turning it on, generally about ten minutes, and the rice can be cooked thoroughly.

It is not advisable to use a rice cooker to boil water, because it consumes electricity and takes longer, try to cook the rice before the peak electricity consumption period, and place it in a state of insulation to prevent the electricity consumption from tripping. For more information about how to remove the lid of the Midea rice cooker, enter to see more content.

The sealing ring on the lid of the Midea smart rice cooker has fallen off, how to install it.

1.Open the lid of the rice cooker, there is a stainless steel inner ring with a sieve hole in the sealing ring, do not pry it open with a screwdriver (I use a red line to trace the ground), if you insist on priing it open, the rice cooker floor cover will be broken. The seals can no longer be installed.

2.The rest of the rice cooker does not need to be removed, that vent hole is movable and can be removed. 3.

Use a flat-headed screwdriver to place it on the clasp of the lid, pry open a slit and pry the entire lid along the edge ,..4.The installation is successful!