-
Hello, look at the quality of the materials and the quality of the sheet metal, and the level of the painter to make the foundation [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】
-
It depends on what kind of putty you use. There is basically no problem with a good putty [If there is a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】
-
Hello, if you talk about good accessories, its durability can last more than 5 years. [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】
-
As long as the sheet metal is good, it will generally not crack, unless it is not as good as the sheet metal, and the putty is scraped thick. 4S shop professional technician, 10 minutes to solve. 】
-
Hello, it depends on whether the sheet metal is done well or not, if it is good, there will not be the phenomenon you said, I hope mine can help you, I wish you a happy car! [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】
-
Hello, regular maintenance is generally no problem. Use with confidence [If you have any questions about the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】
-
Do a good job of managing it for a few years, but you can't touch it, and if you touch it, it's only a few months [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】
-
This has nothing to do with time and years, as long as the good putty of the sheet metal flat is less dotted and the door is closed and the vibration is less, it will generally not crack [If there is a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】
-
Summary. The car sheet metal is recessed a little, the putty has not fallen off, only a slight small crack, and the following methods can be used to repair it: 1
Use automotive sheet metal repair tools to push the depression back into place; 2.Coat the depression with special sheet metal to make it flush with the surface of the car; 3.Use sandpaper to polish the filler part so that it is flat with the surrounding surface; 4.
Apply primer to the soil patch and spray the same paint as the body color to make the repair part the same color as the surrounding body. It should be noted that if the depression is deep or the crack is large, it is recommended to find a professional car repair shop for repair to ensure the effect and safety of the repair. At the same time, car owners should pay attention to maintaining the body to avoid similar accidents.
The car sheet metal is recessed a little, the putty has not fallen off, only a slight crack, how to repair it?
The car sheet metal is recessed a little, the putty has not fallen off, only a slight small crack, and the following methods can be used to repair it: 1Use automotive sheet metal repair tools to push the depression back into place; 2.
Coat the depression with special sheet metal to make it flush with the surface of the car; 3.Use sandpaper to polish the filler part so that it is flat with the surrounding surface; 4.Apply primer to the soil filler and spray the same paint as the body color to make the repaired part consistent with the surrounding body color.
It should be noted that if the depression is deep or the crack is large, it is recommended to find a professional car repair shop for repair to ensure the effect and safety of the repair. At the same time, the owner should pay attention to the maintenance of the body to avoid the occurrence of spine-like accidents. <>
If it is only a small damage to the paint surface, then you can buy car paint self-spraying.
If it is indented, you can use a rubber strip to melt it, then stick it and pull out the depression.
A little dented, you can't see it if you don't look closely, do you use a tinkering pen?
OK. The tinkering pen is totally fine.
It's normal to drive scratchy. There are many people who can deal with palm-sized scratches, that is, they can spray paint themselves.
In your case, a tinkering pen will do.
I'm afraid that the rain will go in and it will rust, can I just use a tinkering pen?
The repair pen has an anti-rust function.
Buy a special car repair pen, this is with anti-rust function.
There is no problem, it should be the previous blood congestion machine.
If the body is depressed and painted, it is recommended to paint sheet metal, about 300 to 500, but if there is no paint off and you are very concerned about the original paint, you can try the paint-free car dent repair technology, no need to destroy the original car paint for body concave repair, the principle is actually very simple, it is based on optics and mechanics, and the use of the lever principle to slowly restore the pits of different depths to the original appearance, look at the following picture You can see it at a glance. >>>More
** At 500-1500 yuan.
The machining accuracy and manufacturing materials of the original door are the same as the original, and the quality is also in line with the automobile manufacturing standards, but there are differences, the only difference is in the painting, the original factory is robot painting, with the car painting, and the original factory is not painted, are manually painted in the later stage. >>>More
The most difficult thing to figure out is this kind of thing, even if you win him, he will have both hands and I don't have any money, do you have a rut. >>>More
As long as the subject matter of insurance is damaged within the scope of the insurance contract, it is an insured event. However, you are talking about your car that was hit, but what you are saying here is not very clear, was it your motor vehicle that was damaged or someone else's motor vehicle was damaged? Or maybe you're personally injured (this is personal insurance, that's not what you should be referring to). >>>More