What should I do if hot pot meatballs block the kitchen drain?

After the sewer is blocked, you can first use a special tool to open the sewer to stir the pipe wall, and then add some hot water for rinsing, and it is best to have some suction plates for ventilation in the process, so that the sewer can be effectively unblocked.

If the hot pot meatballs are blocked in the sewer, you can go and get a long wire or bend the hanger into a certain curve to dredge it, if not, you have to find a professional.

If the hot pot balls accidentally protrude the sewer pipe in the kitchen, then if it is only in the place of its drain pipe, you can disassemble the drain pipe and then pull it out, then if the amount is a lot, and it has reached the place where the sewer pipe is very deep, you can ask a special person to dredge the pipe master to deal with it.

If the hot pot balls are accidentally blocked in the kitchen, first of all, we can use some steel wires dedicated to dredging the sewer to pass it, because it is very soft and easy to communicate.

Hot pot balls block the sewer, and you use that special sewer drain. This thing can melt it. Then pay attention to this ball, don't pour it into the sewer.

Dredging the drainage pipe can be dredged with caustic soda, or directly dredged with boiling water, dredged back and forth at the entrance and exit of the sewer and flushed with water, if the pipe blockage is not serious, you can pour a large spoon of laundry detergent into the sewer pipe, and then pour in 3 cups of hot water.

2 Use your hands or a tool such as a hook to reach into the drain pipe and remove any dirt that is clogged in it. Outdoor sewers should be inspected for fallen leaves or silt that could clog drains.

3 When there is no obvious blockage in the drain pipe of the sink or sink, you can plug the overflow hole with a damp cloth and then use a puffer.

Removal of sludge.

4 If you can't remove the blockage in the drain of the sink or sink with a pickpocket, you can place a bucket at the trap of the drain and then unscrew the elbow to remove the blockage inside.

5 If the above methods do not work, it means that the sludge that causes the blockage of the drainage pipe is deep in the pipe, and the repairman should be reported in time to avoid the long-term blockage and water accumulation in the pool.

Method 1: Boil water.

If you wash your dishes often, you will know that it is easier to wash the grease stains on the dishes with hot water than with cold water. For non-serious sewer blockages, we can also use the same principle, using boiling water to flush the sewer, that is, using hot water to melt the oil remaining on the sewer pipe wall. Prepare enough boiling water (it is recommended to prepare a full pot of boiling water) and keep it continuously poured into the sewer.

Method 2: Baking soda + boiling water.

We all know that the chemical name of baking soda is sodium bicarbonate.

Sodium bicarbonate is alkaline when dissolved in water, while the oil esters in oil stains are hydrolyzed under alkaline conditions. Take an appropriate amount of baking soda and pour it into a pot filled with hot water, and pour the baking soda into the drain continuously and slowly; You can also pour baking soda directly into the sewer, dissolve the baking soda with the water in the sewer, and after a few minutes, after the baking soda and the oil ester of the sewer have fully reacted, pour it with boiling water, and it will basically be dredged.

Method 3: Use a pipeline dredging agent.

If the method of boiling water and baking soda still can't dredge the sewer or the dredging result is not ideal, you can also choose to buy a special pipe dredging agent, which is sold in supermarkets and various shopping malls. This is because there are a variety of ingredients in these special dredging agents that dissolve the oil.

Method 4: Special dredging device.

In contemporary society, as long as we can think of something, there is basically something for sale. Boiling water and dredging agents can't solve the sewer blockage, so you just want to find something to see if there are other things blocked. At home, we generally choose iron wire, but the iron wire is not easy to operate at the bend of the sewer, here you need to buy a special dredge, insert the dredge into the sewer, clean up the oil stain of the sewer by rotating the dredger, and the sewer is basically dredged.

Method 5: Peel the child.

To clean up the sewer oil, in addition to the special dredging device of method four, there is also a leather picker. By pulling the handle, a vacuum space is formed between the piston inside the leather tube and the sewer, and the continuous lifting handle generates pressure to suck up the clogged dirt in the sewer to dredge the sewer.

In view of the complete blockage of the kitchen drain, there are several ways to drain the wheel:

1.Use soda: Pour a bottle of soda into the clogged sewer, wait for 10 to 15 minutes, and then rinse the sewer with boiling water.

2.Use vinegar and soda: Pour 1 2 cups of baking soda and 1 2 cups of white vinegar into the clogged drain, then cover with a plug and let the vinegar and baking soda react, wait 5 10 minutes, then rinse the drain with boiling water, repeat several times.

3.Use unclogging agents: There are many types of unclogging agents on the market that can be used to solve clogging problems, but be careful to choose an environmentally friendly unclogging agent and use it according to the instructions on the bottle.

4.Manual dredging: If none of the above methods can solve the problem, then the only option is manual dredging, which requires the use of a pump or a cleaning tool. For example, a water pump can be used to suck up material clogged in the sewer, or a curved through pipe can be used for repeated cleaning.

It should be noted that in order to avoid frequent blockages in the sewer, it is recommended not to pour greasy, food residues, fibers and other debris into the sewer at will, and to keep the sewer clean and clean it regularly on weekdays.

To block the drain with hot pot oil, first prepare some rice vinegar and baking soda, and then prepare a pot of hot water; Then pour the baking soda into the sewer, and then pour the hot water into the sewer until you can hear the sound of falling off, indicating that the baking soda has completely dissolved the hot pot oil and the sewer has been dredged.

Sodium bicarbonate, chemical formula Nahco, commonly known as baking soda. White fine crystals, less soluble in water than sodium chloroate. It is also an industrial chemical, and the solids above 50 begin to decompose gradually, generating sodium carbonate, carbon dioxide and water, and the chain orange completely decomposes at 270.

1. If the kitchen sewer is blocked by grease stains, you can prepare a basin of boiling water and pour it into the sewer pipe, which can effectively melt the oil stain on the pipe wall, so as to have the effect of dredging.

2. Baking soda can also be used to dredge the sewer pipe. Pour baking soda down the sewer pipe, and then pour an appropriate amount of vinegar, when the vinegar reacts with baking soda, it will disintegrate the oil on the pipe wall and dredge the sewer pipe.

3. Or buy a special pipeline dredging agent and pour it into the sewer pipe, which can easily dispose of the blocked oil and other impurities, so that the dredging will be faster.

4. If you can't dredge it yourself, then you can only contact a professional dredge master and use professional props to dredge it.