-
There are many kinds of shapes in greenhouse engineering, such as arc and herringbone, etc., and the sunlight board is spliced with aluminum alloy connecting strips or pressing strips, and the upper and lower can be sealed with waterproof tape or waterproof glue. What you want is how thick it is, how many square meters of area.
Professional sunshine board manufacturers will answer for you, hopefully.
-
One is adhesive strip sealing, and the other is waterproof tape sealing.
Rubber strip sealing sunlight plate is to seal the gap between the sunlight plate and the aluminum strip with the sunlight plate, and under normal circumstances, one aluminum strip is used with two rubber strips. Usually we are to make the rubber strip of the aluminum strip lap at the joint of the two sunshine plates, here is a reminder that the main sunshine board may occur according to the temperature change and thermal expansion and contraction, we must reserve a certain gap before the two sunshine boards.
If we want to further seal the solar panel after we have fixed it with the bead, then we can use neutral glue on both sides of the strip of the sunshine board, which will make our solar panel seal more perfect. In addition, we can also see that the steps are relatively cumbersome when sealing the solar panel with adhesive strips.
Sealing the sunlight panel with waterproof tape is relatively simple, you only need to tear the protective paper of the waterproof tape, and then stick it directly to the seam of the sunlight panel, and fix it.
-
Either make a color, or install a shade net! The transparent ones are not insulated, they are all used for lighting!
-
You can choose an anti-ultraviolet heat insulated solar panel, which is much more practical than an ordinary solar panel.
-
If you must use transparent sunlight panels, you can choose "Saboput" transparent four-layer sunlight panels, "Saboput" four-layer sunlight panels have better thermal insulation effect and more efficiency than ordinary solar panels.
-
The sunlight board originally has a thermal insulation function, so it's not good to know what you mean.
-
Nowadays, there are many families that will use sunshine panels to shade the sun, so we will not be unfamiliar with such materials, but such sunshine panels also need to be maintained, and the characteristics are more. How to maintain the sun panel? Let's talk about it, I hope it can help you.
Sun panel shading features.
1. The lighting area is large and the illumination is uniform.
2. Long use time and high strength.
3. Land pants have strong anti-corrosion and flame retardancy.
The above nasiddan transmits light and does not decay over time.
How to maintain the sun panel?
Now the sunshine board on the market is divided into three years of warranty, five years of warranty, ten years of warranty, the highest is the ten-year warranty, the sun board is PC material. In terms of maintaining and cleaning the PC sunshine board, we need to know some basic cleaning knowledge:
1. The first thing to pay attention to is the temperature of the water, which is generally controlled below 60 degrees, and it is best to use warm water about 40 degrees. The temperature is too low to maximize the effect of cleaning.
2. Secondly, we should be cautious in the selection of detergents, and we should not choose detergents with erosive effects, but should choose more neutral detergents.
3. The cleaning tools should also be particularly particular, not using hard tools such as brushes, coarse cloths, and mops, but should use soft sponges or soft cloths combined with detergent to gently wipe them, and rinse them with water after the dirt is removed.
4. Finally, wipe the water stains on the rinsed PC sunshine board with a clean soft cloth.
The above introduces all the knowledge about the sunshade characteristics of the sunshine panel and the maintenance method of the sunshine panel, I hope it can help you. The sun visor has many characteristics, has a good thermal insulation effect, and is also relatively close to the people in terms of **, which is acceptable to many families, but when we use this material, it also needs to be maintained, so that it can be used for a long time.
1. Recognize the famous brand, which is also the most worry-free way at present, in the face of chaotic market conditions, most consumers have a feeling of dazzle, which also brings great difficulty to our purchase. Therefore, choosing a brand-name product with a higher reputation can save us a lot of time. 2. Waterproofing should be comprehensiveIn order to do everything without omission, we cannot let go of any parts that may cause water leakage, including bathrooms, floors, walls and many other parts. >>>More
Flame retardant class B1.
If you want a higher level of flame retardant effect, you can use flame retardant pellets to produce HB level. >>>More
Cipher, Secret, Density, Close,
Sunshine Insurance's subsidiaries include: property insurance, life insurance, credit guarantee insurance, asset management, medical and health care, etc. When we talk about "Sunshine Insurance", we usually refer to Sunshine Life, which is only a part of the whole group. >>>More
Accidents are everywhere, accidents will not only cause us trouble, but also cause financial losses, in this regard, it is recommended that you buy a suitable accident insurance for yourself as soon as possible to improve your accident security. Is Sunshine Insurance accident insurance good? >>>More