How much water do you put in a rice cooker to cook porridge?

The ratio of water to rice is generally 1:1 is more appropriate, that is, one bowl of rice and one bowl of water, if there are two bowls of rice, then you can put two bowls of water, and take the bowl that prints rice to print water.

At the same time, you can also use another method to determine the amount of water, no matter how many meters, anyway, as long as the water is slightly higher than the meter or so) This method is correct, that is, about a finger or so, you just need to look at it with your eyes.

To cook porridge in a rice cooker, you need to put more water in the pot, and the ratio of water to rice is 5:1, which is best measured with a small measuring cup. The porridge cooked in this way has just the right consistency and delicate taste, and the rice cooked in the porridge can be soaked for a few minutes in advance, or it can be washed and directly put into the pot.

If you soak first and then cook, you can shorten the cooking time of porridge, but soaking can easily lead to nutrient loss.

There are two ways to cook porridge in a rice cooker:

1. Boil; 2. Simmer.

1. The cooking method is to boil over high heat until boiling, then switch to low heat, and slowly collect the porridge soup until thick. Porridge should not be separated from the heat, and the porridge with high requirements should be simmered over low heat until it is fully cooked.

2. The simmering method refers to heating it with a strong fire until it boils, pouring it into a wooden barrel with a lid, closing the lid tightly, and simmering for about 2 hours. The porridge made by this method has a more mellow and strong flavor.

When many people cook porridge, they put the rice directly into the pot to cook, in fact, this is a big mistake, the correct way to cook porridge:

When cooking porridge, it is a big mistake to cook it directly! Without this 1 step, the porridge is not fragrant or strong, and the taste is not long.

1.Wash the rice twice with running water, then put it in a bowl, add an appropriate amount of cold water, and soak for 1 hour to set aside.

2.Put water in the pot, when the water temperature is 70 degrees Celsius, put in the soaked rice, boil over high heat, then change to low heat to cook, the rice boils and blooms, put in the lard, stir in one direction for 3 minutes, then turn off the heat, cover the pot, simmer for 10 minutes, after 10 minutes, the porridge is cooked, and it can be eaten.

3.Why is the porridge cooked in the porridge shop, that is, a little lard is added, lard can make the porridge boiled thicker and more fragrant, many people think that the porridge cooked with lard will be very greasy, fishy smell, in fact, this is a wrong idea, adding an appropriate amount of lard to cook porridge, can make water and oil form water-in-oil, so that the porridge is cooked thicker and more fragrant.

4.When cooking porridge, be sure to stir in one direction for 3 minutes, this step can make the porridge more viscous, and it will be more fragrant to drink, when cooking porridge, boil the rice over high heat, you should change to low heat, the porridge cooked over low heat will be more fragrant and thicker, and the porridge will be cooked for a long time, the nutritional value will be higher, and the taste will be better.

Cooking porridge requires a lot of water, generally about three liters of water for two or two meters!

However, you can add water during the cooking of porridge, so put half of the water first, and then add it if it is not enough.

The ratio of rice to water for cooking porridge in a rice cooker is generally 1:8-12That is, a cup of rice, put 8-12 cups of water, personal dilute hobbies are different, you can adjust within this range, some rice cooker liners also have the water level scale mark for cooking porridge, you can also refer to the scale mark to add water.

Hello, you need to put more water in the rice cooker to cook porridge, and the rice cooker has a scale, how much water do you usually put in cooking rice? If you want to cook porridge, you can add twice the amount of water.

Rice cookers will have a scale, and if you cook porridge, don't exceed the highest scale line.

Although it is confirmed that the demand curve arises naturally from the theory of consumer choice, the derivation of the demand curve itself is not a theory that proposes consumer behavior. Simply determining how people react to change doesn't require a rigorous analytical framework. However, consumer choice theory is extremely useful.

As we will illustrate in the next section, we can use this theory to more deeply determine the factors that determine family behavior.

Instant Answer Draw budget constraint lines and indifference curves for Pepsi and pizza. Illustrate what happens to the budget constraint line and consumer optimum when pizza** rises. Use your graph to divide this change into income effects and substitution effects.

Four applications. Now that we've established the basic theory of consumer choice, we can now use it to illustrate four questions about how the economy works. However, since each problem involves family decision-making, we can address these issues with the consumer behavior model we just proposed.

Are all demand curves sloping to the bottom right?

In general, when an item** goes up, people buy less. Chapter 4 refers to this normal behavior as the law of demand. This pattern manifests itself in the demand curve sloping to the lower right.

However, as far as economic theory is concerned, the demand curve also sometimes slopes to the upper right. In other words, consumers sometimes defy the law of demand and buy more when one item rises. To illustrate how this can happen, look at Figure 21-12.

In this example, the consumer buys two items – meat and potatoes. Initially, the consumer budget constraint line was a straight line from A to B. The best advantage is c.

When the potato ** rises, the budget constraint line moves inward and is now a straight line from A to D. Now the best thing is e. It is important to note that the rise in potatoes has led consumers to buy more potatoes.

1. It depends on whether you want it to be sticky or clear.

Judging by the material.

With uncooked rice is twenty minutes.

Cooked rice with boiling water is fifteen minutes, boiled until sticky for 30 minutes, up to 45 minutes.

2. There is no way to determine the time for cooking porridge in the rice cooker, it depends on how much porridge you cook, as long as the water in the rice cooker is boiled, if you want to eat thicker, it will take longer.

It takes about 15-45 minutes to cook porridge in a rice cooker.

When cooking porridge in a rice cooker, it depends on the amount of Yamato rice and cooked raw rice. If it is raw rice, it takes more than 20 minutes to cook the porridge. If you want to cook it to a sticky state, you need to cook it for a few more minutes.

If you cook rice and water to cook porridge, it will take about 15 minutes, which means that it will save a lot of time compared to raw rice. Secondly, if there are more meters, it is also necessary to increase the time.

Before cooking the porridge, add an appropriate amount of water according to the amount of rice to prevent the porridge from being too thick or too thin. In addition to cooking rice porridge, rice cookers can also cook multigrain porridge, stewed soup, etc. Coarse.

Hard and hard to cook. Before cooking porridge, you can soak it in cold water for more than an hour. It takes about an hour to cook multigrains in a rice cooker.

Precautions for the use of rice cookers.

1.Cook with a rice cooker. After putting in the inner tank, it is best to rotate the inner tank left and right so that the inner tank is in close contact with the electric heating plate, so that the heating speed is fast.

When cooking rice in a rice cooker, automatic tripping does not mean that the rice is cooked, because it is not within the scope of the intended function. It is best to adjust it yourself, and wait for the food to be cooked before turning off the power and opening the lid.

3.Rice cookers should not cook acidic and alkaline foods. So don't put food that is not suitable for cooking in to heat it to avoid damaging the inner bowl of the rice cooker.

During the power on of the rice cooker, it is best to have a special person to guard it to avoid malfunctioning, continuing to power on, and damaging the electrical components. It is best not to bump the inner liner of the rice cooker, otherwise it will affect the heating. If it is not heated evenly, the food will be half-cooked.

Cook for half an hour, here's how to cook rice porridge with a rice cooker::

Preparation: 1 tablespoon of rice, appropriate amount of water, and a rice cooker.

Steps: 1. Wash the rice twice and soak it.

2. Wait for the water to boil, add the soaked rice, the amount of water is added according to your like, like the thick one to put less water, like the thin one to put more water.

3. Turn on the rice cooker, press the porridge cooking button, and cook for about half an hour, during which the foam is skimmed.

4. Serve and enjoy.