How to correct the direction of reversing and warehousing, and how to correct the direction of rever

First, the principle of reversing the direction of correction: subject to the rear of the car, the rear of the car wants to lean to the right, to the right to hit the steering wheel; The rear of the car is to the left, to the left, and then to the opposite direction.

Second, the operation method of reversing and correcting the direction of storage.

1. The car is formed, indicating that the rear of the car is tilted to the right, and the direction is to the left, and when the body is positive, it will return to the positive direction.

2. When the car is formed, it means that the car is inclined to the left, and it will hit the direction to the right, and when the body is positive, return to the positive direction.

3. The car is completedshape, but the left side is wide, the right side is narrow, to the left direction, adjust to the rear track line, the ideal range, and then to the left direction, back to the positive direction.

The principle of correcting the direction is based on the rear of the car, the rear of the car wants to lean to the right, hit the steering wheel to the right, the rear of the car to the left, to the left, and then to the opposite direction back to the right. The car is formed, indicating that the rear of the car is tilted to the right, and the direction is to the left, when the body is positive, it is straight. When the car is formed, it means that the car is tilted to the left, to the right direction, when the body is positive, back to straight.

The car is into|shape, but the left side is wide, the right side is narrow, to the left direction, adjust to the rear track line, the ideal range, and then to the left direction, back to the straight. In the inverted warehouse, the correction direction should be about 1 meter in advance, otherwise when the corner of the warehouse, even if the correction has the possibility of pressing the line.

If you want to take the subway, get off the subway directly after leaving Xi'an North Railway Station, take Line 2 (there is only one line here, that is, Line 2, this is the starting station) to get off at Beidajie Station, transfer to Line 1 (Textile City direction) to get off at Wulukou, and walk north for one stop (about 700 meters) to Xi'an Railway Station. The subway ride takes about half an hour, and the walk takes about 10 minutes.

Let yourself form a sense of the direction of repair, and look at the mirror to know the direction of repair.

How to correct the direction of reversing and warehousing? For those who don't know how yet, be sure to see it!

First, the correction method of the steering wheel playing early:

1. The steering wheel is early because the students did not find a good position, and they need to control the speed of the car, and observe the right rear wheel after half a circle (at this time, the radius of the car turns to the envy becomes larger, and the body begins to move to the left);

2. Observe the body from the rearview mirror when it is about to be on time, the steering wheel is back to the right, and the rearview mirror can be slightly corrected, and the car should not be reversed through the library.

Second, the steering wheel correction method in the library:

1. Observe the entire body from the rearview mirror, if the rear of the car leans to the right, it should be repaired to the left at this time, and the body is back to the right.

2. Judge the body by the rearview mirror, if the body is positive, but the margin side is too wide, at this time, you can repair the direction of the wide side, so that the body can press a little distance and then return to the right.

Attached: Key points of subject 2 reversing and warehousing:

1. The rearview mirror will be adjusted

The rearview mirror of a car is an indispensable and important aid when reversing. When adjusting, the mirror should be pressed down to facilitate the observation of the marking line on the ground, and the method of adjustment must be learned, because you can see that the height of the students is very different from that of the trainees, and the mirror can be better observed by adjusting the mirror.

2. Press the speed:

Novice students feel the car and driving skills are relatively unfamiliar, so they must learn to use the method of pressing the clutch pedal to control the speed, the speed is fast to press the clutch pedal to reduce the speed, the car is about to stop to relax the pedal, through repeated practice can feel the speed of the car is completely through the clutch pedal to determine the number of acres; The ideal state of pressing the clutch, the speed is extremely slow, but it does not stop.

Millions of car purchase subsidies.

How to correct the direction of the rolling cloth and the position of the reversing warehouse: 1. If the left side comes in when reversing, go to the left side to hit the steering wheel, if the left side is narrow, delay the left side to hit the steering wheel; 2. If the right side comes in when reversing, delay the steering wheel to the right, and if the left side is narrow, lift it to the right side to hit the steering wheel.

Reversing warehousing method:

1. First move the car forward over the parking space and the front car level, the distance between the two cars depends on the length of the parking space and the width of the road.

2. Turn the steering wheel to the right near the dead center position and fall backwards until the right front corner of the car is close to the left rear corner of the front car, and then start to turn the steering wheel back. After the right is reversed, it will be put into the garage until the front right corner of the car is close to the left rear corner of the front car.

Invert the left library. 1. Hang the reverse gear, release the handbrake, slowly lift the clutch to the semi-linkage, stabilize the clutch after starting, and reverse backwards at a slow speed;

2. Turn back to the right rear to observe the right rear door triangle window, when the front center rod of the library reaches the front of the triangle window, the direction will be quickly killed to the right;

3. If you observe that the right rear of the car is likely to hit the middle bar, quickly turn back to the left in a large direction, wait for a while, and when it is estimated that the rear of the car will not hit the middle bar, continue to hit the right direction;

4. After the rear of the car enters the garage smoothly, observe the left reversing mirror, and when the left body line is parallel to the left side line of the library, quickly turn the direction to the left;

5. After the front of the car is successfully put into the warehouse, observe the flat condition of the car and the side line backwards to correct the direction, and maintain the direction after repairing;

6. After arriving at the stop sign, stop the car.

Pour the right library. 1. After reversing smoothly, when the body reaches the position of the kill mark, the direction is quickly killed to the left;

2. After approaching the middle rod, when the left rear is likely to touch the middle rod, quickly return to the right in a large direction, wait for a while, and it is estimated that it will not touch the middle rod, and continue to hit the left direction;

3. After the rear of the car enters the garage smoothly, when the left body line is parallel to the left side line of the garage through the left reversing mirror, the direction is quickly returned to the right;

4. Properly adjust and dismantle the left and right, and stop at the parking sign.

Photo by Pacific Automobile Network Q&A).

Pay attention to the following two points in the direction of reversing into the warehouse:

1.When reversing, turn left, turn left at the rear of the car, turn right, turn right at the rear of the car – driving in the same direction as heading.

2.When corrected, when the rear of the car is tilted to one side, the collapse is also known to return (fix) to the other side. (If the body is tilted to the left, it must be moved to the right to correct, and the steering wheel must be turned to the right.)

Otherwise, when you find that you are still leaning to this side, you will always think that you are wrong - in fact, yes, only when you return (repair) to the right direction of the square potato core, can you continue to turn to the other side to change the direction of the rear of the car, and not returning to the direction of the opposite direction can only reduce the deviation of the rear of the car.

3.You should master the operation method of "slow start and fast turn".

The reversing speed should be controlled within 5km h, when reversing, if it is necessary to move forward or backward repeatedly due to the terrain or steering angle of the steering wheel, it should be quickly turned the steering wheel through the movement of the vehicle at the moment before each backward or forward stop, so as to prepare for the re-steering, and after the vehicle is stopped, the steering wheel shall not be forcibly turned.

The specific approach depends on the actual situation. If you want to adjust, put your hands on 12 o'clock.

First, if the body is too wide, hit 90 degrees, that is, hit 9 points to the left and 3 points to the right.

Second, if the body is not too big, hit about 45 degrees. But remember, as soon as the rear of the car moves, you have to turn right, that is, back to the 12 o'clock position, otherwise you have to go in the other direction. Remember, don't hit left and back, and play back and forth if you don't get there.

In fact, it doesn't work. After all, the garage is only a few meters long, and if you don't control your feet well, it's the bottom line all of a sudden. I was like that at first.

When I poured into the garage, it was okay, the body was not too crooked, I always wanted to fix it, but it was better not to fix it once. Later, I realized these two things:

1.Correction of the direction of correction, 2Corrective actions should be neat (don't fix the steering wheel left and right if you don't get in place, you can only make yourself nervous and waste time).

The most important thing in the later stage is to do a good job of reversing and warehousing, so that there is no need to repair. I wish you to realize the truth as soon as possible, just practice more, and another point is to control the clutch. If it's slow, you'll have plenty of time to make corrections, otherwise you'll be in a hurry.

Millions of car purchase subsidies.

The skills of reversing and correcting the direction of warehousing are introduced as follows

1. The direction is played too early. Go back to a circle, and then continue to wait for the body to be timing and then go back to a circle, so that the wheels are back to the center and then enter the warehouse steadily, and you can fine-tune it after entering the warehouse.

2. The direction is too late. Wait for the body to be in time, do not return to the direction, and wait until it is almost in the warehouse and then return. Fine-tuning of the body after entering the garage to correct the direction.

3. The judgment of God that needs to be paid attention to is. In the process of reversing the warehouse, the correction direction should be about 1 meter in advance, otherwise when reaching the storage corner, even if the correction has the possibility of pressing the line. The direction of correction is based on the rear of the car, the rear of the car wants to lean to the right, hit the steering wheel to the right, the rear of the car to the left, hit the direction to the left, and then return to the opposite direction.

4. The key is to look at the pole and shoulder level to the right to kill the steering wheel, and then look at the left rearview mirror, when the body is 30 cm different from the left corner, return a circle of plates, and wait for the body to be parallel to the sideline and then go back a circle. However, if you play early, the direction is equipped with a barricade, and if you follow the above essentials, you will press the left library line.

Reversing and warehousing skills:

In the second subject of the exam, I learned to park in the side direction, but when I really got to the actual road, there are cars in the front and rear of a parking space, and sometimes there is no complete parking space, at this time many people forget how to reverse into the garage.

Faced with this situation, take the "one" shaped parking space on the right side of the parking road as an example. First drive the car parallel to the car in front, and the distance from the car in front of 1 meter, and then the right side of the rearview mirror and the front car B-pillar alignment, and then begin to the steering wheel to the right full, backward reverse, when the car and the front car form about 45 ° angle, the steering wheel to the left full reversing, and finally after reversing into the parking space, according to the position of the rear wheels to judge back to the right parking.