How to make a big lantern in elementary school, how to make a lantern for elementary school students

Materials: bamboo strips, oil paper, hemp rope or thin wire, small candles Equipment: Soldering iron or wire furnace I don't know if you understand Bamboo strips are centimeter wide Bamboo strips, also called bamboo splits, as the name suggests, are split into a piece with bamboo poles If you don't want oil paper, general paper is on the line, and the big red paper used for marriage It is recommended to use fine hemp rope Candles are the kind of small candles used for birthdays Coiled silk stove is the kind of small electric stove that is set around in a circle, and after being connected to the power supply, it will be red Practice:

To look carefully, it's not easy to learn, it's what I figured out when I was on the Yuan Festival (Lantern Festival) this year (make an ordinary cube lantern) Take a bamboo split that is long enough, measure the size, mark the distance, it is recommended to be 25 cm, make four sections, and use even force with both hands at the mark of each section to make it naturally bent, and bake it on the wire oven (be sure to pay attention to the temperature, otherwise it will ignite the pig split) to the shape, that is, 90 degrees, and so on, roast four times, and the bamboo split will become a square circle. Use the same method to make 2 more With three square circles, you can put together a cube Surface Carefully paste the oil paper Of course, before pasting the paper, you should place the small candle inside the lantern, as for the **, it's up to you, as long as it's firm If you like it, paste the paper cut This is my personal experience, If you want to understand something, just ask me again I hope it helps you I don't know what my friend makes lanterns for? I came up with the idea of making my own lantern because of this year's Lantern Festival, and I didn't know anything at the time, so I didn't know where to start, but when I had a flash of inspiration, everything was fine.

How to make lanterns for primary school students, I believe many friends have encountered this similar problem, so how to solve this kind of problem? Let's share the solution to this problem with you, I hope it can help you.

Tools Raw materials.

Confetti. Double-sided tape.

Pencil. Scissors.

Method steps.

First fold the square colored paper in half, draw a half circle on it with a pencil, cut it out with scissors, and make a few more according to the method.

How to make lanterns for elementary school students.

Take out the black cardboard and glue double-sided tape on it.

How to make lanterns for elementary school students.

Glue the cut circles one by one on top of the black cardboard, and in turn, glue double-sided tape to one end of the black cardboard, and then glue it to the other end.

How to make lanterns for elementary school students.

The circle is facing outward, and then the outer circle is placed.

How to make lanterns for elementary school students.

Take a rectangular piece of colored paper, fold it in half twice, then cut it into one piece with scissors, paste it with double-sided tape, and stick it under the lantern.

How to make lanterns for elementary school students.

Then take a long strip of colored paper and glue double-sided tape at both ends and stick it on the top of the lantern, and finally take a long strip of paper and stick it to the lantern as a handle.

Lantern handmade (elementary school students).

1. Prepare some disposable chopsticks and face towels, and prepare handmade scissors, hot melt glue guns and hot melt adhesive, slag double-sided tape, LED small light strings, and fine hemp rope.

2. Cut the face towel into a square or rectangle (prepare four of the same size), cut the disposable chopsticks to the appropriate size, and glue them with hot melt adhesive. Do a total of four as shown in the figure. (Children should be careful not to get burned by hot melt adhesive).

<>4. Stand the four finished lantern noodles together with hot melt adhesive, and cross the disposable chopsticks at the bottom, and fix the LED small light string with double-sided tape at the bottom.

5. Cross connect with hemp rope at the top, and find a small tool to lift it, and the small lantern will be as good as a trace.

The small lantern is made as follows:

1. First of all, we need to prepare the materials for making the lantern: paper cups, red threads, glue or double-sided tape, coloring pens or gouache and scissors.

2. Take out a prepared paper cup, and then use a scissors knife to cut the paper cup evenly into strips of consistent size along the mouth to the bottom.

3. After cutting longitudinally, trim the edge of the cup mouth to ensure neatness and conciseness.

4. You can trim the strips of the cup body to ensure that the width of the strips is consistent, and try to cut the smooth and rectangular edge.

5. After pruning, bend the vertical strips to the inside one by one, and initially show the shape of the lantern.

6. Then, take out the other prepared paper cup and cut out the mouth part, leaving only the bottom of the cup about 2 cm.

7. Cut out uniform and firm strips of the same size from the bottom of the retained cup according to the cutting method of the previous paper cup.

8. At the bottom of the two paper cups, drill a small hole respectively and thread it with red thread.

9. Then glue the vertical strips of the two paper cups one by one, after the bonding is completed, the lantern is almost formed, and you can also use your creativity to add some other decorations.

Paying attention to hanging lanterns:

1. The lantern must be symmetrical, and the height and distance should be moderate; The lantern is hung in the south and not in the north.

2. Hanging lanterns need to be hung in the south, and it is taboo to hang in the north, because the water in the north is bad luck and is unlucky. Hanging lanterns must be an even number, whether it is hung on both sides of the gate or on the balcony, it must be an even number; Touching the lamp, that is, destroying the lamp on the fifteenth day of the first lunar month. Hanging lantern potato digging can not be used repeatedly.

How to make a small lantern:Materials: cardboard, paper knife, ruler, pencil, double-sided tape, string.

Small lantern making steps:

1.Prepare a rectangular piece of red cardboard (I'm using an old calendar card that has expired).

2.Leave out each side of the cardboard, draw several parallel lines in equal parts, and then cut them with a paper knife.

3.Roll it up to make the jam paper arc.

4.Paste the leftovers into thin strips for spikes, and then stick them on the rope.

5.The pretty little lantern is ready.

Such a beautiful and small lantern is completed, for children to make a lantern handicraft is very fulfilling, especially in the festival Xiang erected in the handmade lantern to decorate, that is, to increase the child's hands-on ability to interact with parents.

Method 2: Prepare materials Tools: square cardboard, tassels, glue.

1. Prepare a 15x15cm square cardboard.

2. Fold the corners in half twice, and fold them in half twice on the edge.

3. Fold it inward and flatten the card into a small square.

4. Align the edges to the crease of the middle line.

5. Then open the inner fold and flatten.

6. Fold the four corners inward and flatten them again.

7. Fold the rest of the corners in half and stuff them inside.

8. Jam paper, cut off the corners with scissors.

9. Thread the tassel through the hole.

10. Apply glue to the cardboard.

Here's how to make a small lamp and guess the old cage:

Start by preparing two paper cups, a pair of scissors, and some double-sided tape and scotch tape. Once you're ready, it's time to start making your handmade lanterns.

Use scissors to cut the cup open. First pick up a paper cup, then use scissors to cut off the rim of the cup, then put the cup upright, and use scissors to cut the cup into strips as the main body of the lantern, but do not cut to the bottom, the bottom of the cup needs to be retained. After cutting, take out another cup and cut the bottom of this cup with scissors.

Glue the cups with double-sided tape. Glue the opening of the main body of the cut lantern and the bottom of the freshly cut cup together with double-sided tape, and a lantern is roughly completed. Then use a stick or paper stick to make the handle of the lantern, and you can also dye the lantern in your favorite color, so that a lantern is completed.

Expanding Knowledge Spike:

Chinese lanterns, also collectively known as lanterns, are an ancient traditional handicraft of the Han nationality. After thousands of years of development, lanterns have developed different regional styles, each with a unique artistic expression. Every year around the Lantern Festival on the 15th day of the first lunar month, people hang red lanterns symbolizing the meaning of reunion to create a festive atmosphere.

The lantern combines painting, paper cutting, paper tie, piercing and other crafts, and is closely related to the life of the Chinese. The lantern has become a symbol of Chinese festivities.

Through the inheritance and development of generations of lantern artists, a rich variety and superb craftsmanship have been formed. From the types: palace lamps, yarn lamps, chandeliers and so on.

In terms of modeling, there are figures, landscapes, flowers and birds, dragons and phoenixes, fish and insects, etc., in addition to the marquee lanterns for people to enjoy.

The practice of handmade lanterns:Ingredients: 1 piece of red and 1 yellow piece of drawing paper, scissors, a stapler, 1 piece of white latex or glue stick, and 1 red hair root.

Steps. 1. Prepare the required materials and tools.

Steps. 2. Fold the red paper horizontally in half, and use safety scissors to cut the red paper at an equal distance from the folded place.

Steps. 3. Fold a small part of the yellow paper horizontally and tear it off, roll up the remaining paper along the long side, and fix the opening with a stapler. You can also replace the stapler with white latex or glue sticks.

Steps. 4. Coat the two long sides of the cut red paper with white latex, and roll them up around the yellow straight tube as shown in the picture below.

Steps. 5. Paste a slender red paper strip to make a lantern handle, and the small lantern is completed.

The lantern is made as follows:Material tools: 1 piece of red and 1 yellow piece of drawing paper, 1 piece of safety scissors, 1 stapler, 1 piece of white latex or glue stick.

1. Fold the red paper horizontally in half.

2. Use safety scissors to cut the red paper at an equal distance from the folded place.

3. Fold a small part of the yellow paper horizontally and tear it off.

4. Roll up the remaining drawing paper along the long side.

5. Fix the opening with a stapler. You can also replace the stapler with white latex or glue sticks.

6. Coat the two long sides of the cut red paper with white latex.

7. Roll it up around the yellow straight tube as shown in the figure below.

8. Paste slender red paper strips to make lantern handles, and the colored paper lanterns are completed.

Elementary school students make lanterns as follows:

Preparation materials: cardboard, glue, scissors, knife, ruler, double-sided tape, pen.

Children should pay attention to safety when using scissors! )

Preparation materials are relatively common materials. If you don't have it at home, it's easy to buy it.

Specific steps: 1. Take out a piece of colored cardboard, put the cardboard horizontally, and draw two straight lines with a ruler on the top and bottom of the cardboard.

Then use a ruler to draw vertical lines between these two straight lines, and then cut the vertical lines with a knife. Note that the spacing between each vertical line should be the same, and the lantern will be more neat in this way. As shown below:

When using the knife, parents should take care of their children.

2. Cut out two slender rectangular strips and stick them on the upper and lower straight lines on the cardboard. Zheng Pai.

When sticking double-sided tape, it is recommended to leave some space below, and the back can be decorated.

3. Use double-sided tape to connect the cut cardboard left and right, and glue it together from end to end to become a cylinder.

Cylinders. 4. Slowly stretch the cylinder out of the shape of a lantern with your hands.

The shape of the lantern can be slowly propped up according to actual needs. Personally, I think the middle fat ones are good-looking.

5. Use cardboard of other colors to cut out some small ornaments, such as small flowers, hearts, and various geometric shapes. I'm cutting small flowers here. Among them, the largest blue flower can be used as a base for lanterns, and you can also make other beautiful bases according to your own travel ideas.

The choice of flower shape is mainly for the theme of "flowers and full moon". You can make some green leaves as a foil, the effect is better.

6. Glue the largest flower to the bottom of the lantern as a base, and stick other small flowers and green leaves to the lantern at will, and a beautiful flower lantern is ready!